[Fri Oct 14 22:43:51 2011] Detection parameters:
  Position = (1218.1, 757.5) = 22 19 7.58 -27 17 15.7
  Extent = 1.6" x 1.2", rotation angle = 149 degrees
  Source counts = 217.0 +/- 15.7
  Background counts = 29.0
  Rate = 0.006 +/- 0.0004

[Fri Oct 14 22:43:54 2011] Off-axis axis estimate = 6.69'
[Fri Oct 14 22:45:00 2011] Using EEF radius (= 2.00 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:45:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 22:45:00 2011] Initial guess for spatial extent in simple fitting = 2.00"
[Fri Oct 14 22:45:00 2011] source mask rpix=4.1, npix_max = 83, mask sum = 81, frac = 0.974
[Fri Oct 14 22:45:00 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.00"
[Fri Oct 14 22:45:01 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 14 22:45:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10305_pi14-548_cl_pass0_src3.csv
[Fri Oct 14 22:45:01 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 14 22:45:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10305_pi14-548_cl_pass0_src3.csv
[Fri Oct 14 22:45:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10305_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10305_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:45:01 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 14 22:45:01 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 14 22:45:01 2011] Fit fullrun_ccd7_acisf10305_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 14 22:45:13 2011] Spatial fit model total counts = 244.998000, observed total counts = 245.000000
[Fri Oct 14 22:45:13 2011] Offset between fit and detection position for source 10 = 0.590367 pixels
[Fri Oct 14 22:45:13 2011] 246.930100 total counts/ 65.109100 bgd. counts: snr = 22.533217
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.590367 pixels
  Position = (1218.0, 758.1) = 22 19 7.60 -27 17 15.7
  Extent = 1.8 (1.5-2.1)", rotation angle = 0
  Source counts = 181.8 +/- 15.7
  Background counts = 65.1
  Rate = 0.005 +/- 0.0004
[Fri Oct 14 22:45:13 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:45:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:45:13 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:45:13 2011] Source does appear to be extended
[Fri Oct 14 22:45:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:45:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:45:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 22:45:30 2011] Initial guess for spatial extent in simple fitting = 1.79"
[Fri Oct 14 22:45:30 2011] source mask rpix=3.6, npix_max = 68, mask sum = 64, frac = 0.936
[Fri Oct 14 22:45:30 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.79"
[Fri Oct 14 22:45:31 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 14 22:45:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10305_pi14-548_cl_pass1_src3.csv
[Fri Oct 14 22:45:31 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 14 22:45:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10305_pi14-548_cl_pass1_src3.csv
[Fri Oct 14 22:45:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10305_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10305_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:45:31 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 14 22:45:31 2011] fullrun_ccd7_acisf10305_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 14 22:45:31 2011] Fit fullrun_ccd7_acisf10305_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 14 22:45:39 2011] Warning, spatial fit 3 centroid is now closest to src. 17
[Fri Oct 14 22:45:39 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:45:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:45:39 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:45:39 2011] Source does appear to be extended
[Fri Oct 14 22:45:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:47:01 2011] Not overwriting source region fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10_src.reg
[Fri Oct 14 22:47:01 2011] Extracting stamp from image fullrun_ccd7_acisf10305_pi14-548_cl_sm2.00.img.gz, (1136, 676) - (1300, 840)
[Fri Oct 14 22:47:01 2011] Writing fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10.gif
[Fri Oct 14 22:47:13 2011] ../../acisf10305/products/events/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10_src.evt and ../../acisf10305/products/events/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Oct 14 22:47:13 2011] Size of ../../acisf10305/products/events/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10_src.evt.gz[events] = 246 counts
[Fri Oct 14 22:47:13 2011] Mean chipx,y = (965.50, 745.28)
[Fri Oct 14 22:47:13 2011] Mean tdetx,y = (4882.50, 2447.28)
[Fri Oct 14 22:47:13 2011] chipx,y range = (944.00-995.00, 721.00-770.00)
[Fri Oct 14 22:47:13 2011] Size of ../../acisf10305/products/events/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 277 counts
[Fri Oct 14 22:47:13 2011] ../../acisf10305/products/images/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10_src.img and ../../acisf10305/products/images/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Oct 14 22:47:13 2011] ../../acisf10305/products/spectra/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10_src.pi and ../../acisf10305/products/spectra/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Oct 14 22:47:19 2011] ../../acisf10305/products/lightcurves/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10_src.lc and ../../acisf10305/products/lightcurves/fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Oct 14 22:48:52 2011] Keeping rmf generated by specextract
[Fri Oct 14 22:48:53 2011] 203.774
[Fri Oct 14 22:49:04 2011] Updating aperture counts using extracted products
[Fri Oct 14 22:49:04 2011] Error reading totcts from fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Oct 14 22:49:04 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 22:49:04 2011] Using photon index=1.80, rate=0.0048, arf fullrun_ccd7_acisf10305_pi14-548_pass1_cl_src10.arf
[Fri Oct 14 22:49:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 22:49:04 2011] Updating source flux to 3.9e-14