[Sat Sep 24 01:08:52 2011] Detection parameters:
  Position = (885.6, 960.9) = 16 6 12.68 0 0 27.3
  Extent = 0.5" x 0.5", rotation angle = 7 degrees
  Source counts = 1090.8 +/- 33.6
  Background counts = 38.2
  Rate = 0.01 +/- 0.0004

[Sat Sep 24 01:08:55 2011] Off-axis axis estimate = 0.29'
[Sat Sep 24 01:10:45 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 01:10:45 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Sep 24 01:10:45 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.856
[Sat Sep 24 01:10:45 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.41"
[Sat Sep 24 01:10:51 2011] fullrun_ccd7_acisf10304_pi14-548_cl_pass0_src1.ximg exists
[Sat Sep 24 01:10:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10304_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 01:10:51 2011] fullrun_ccd7_acisf10304_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Sep 24 01:10:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10304_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 01:10:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10304_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10304_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 01:11:02 2011] fullrun_ccd7_acisf10304_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 01:11:02 2011] fullrun_ccd7_acisf10304_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 01:11:02 2011] Fit fullrun_ccd7_acisf10304_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 01:11:46 2011] Spatial fit model total counts = 1298.780000, observed total counts = 1289.000000
[Sat Sep 24 01:11:46 2011] Offset between fit and detection position for source 1 = 0.742174 pixels
[Sat Sep 24 01:11:46 2011] 1287.632000 total counts/ 298.586000 bgd. counts: snr = 57.237647
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.742174 pixels
  Position = (886.1, 961.4) = 16 6 12.68 0 0 27.3
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 989.0 +/- 35.9
  Background counts = 298.6
  Rate = 0.01 +/- 0.0004
[Sat Sep 24 01:11:46 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:11:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:11:46 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 01:11:46 2011] Source does appear to be extended
[Sat Sep 24 01:11:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 01:12:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 01:12:36 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sat Sep 24 01:12:36 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.214
[Sat Sep 24 01:12:36 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.42"
[Sat Sep 24 01:12:41 2011] fullrun_ccd7_acisf10304_pi14-548_cl_pass1_src1.ximg exists
[Sat Sep 24 01:12:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10304_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 01:12:41 2011] fullrun_ccd7_acisf10304_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Sep 24 01:12:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10304_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 01:12:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10304_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10304_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 01:12:43 2011] fullrun_ccd7_acisf10304_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 01:12:43 2011] fullrun_ccd7_acisf10304_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 01:12:43 2011] Fit fullrun_ccd7_acisf10304_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 01:13:09 2011] Spatial fit model total counts = 1296.580000, observed total counts = 1282.000000
[Sat Sep 24 01:13:09 2011] Offset between fit and detection position for source 1 = 0.002482 pixels
[Sat Sep 24 01:13:09 2011] 1282.733000 total counts/ 294.789000 bgd. counts: snr = 57.540905
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.002482 pixels
  Position = (886.1, 961.4) = 16 6 12.68 0 0 27.3
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 987.9 +/- 35.8
  Background counts = 294.8
  Rate = 0.01 +/- 0.0004
[Sat Sep 24 01:13:09 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 01:13:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 01:13:09 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 01:13:09 2011] Source does appear to be extended
[Sat Sep 24 01:13:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 01:16:22 2011] Not overwriting source region fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_src.reg
[Sat Sep 24 01:16:22 2011] Extracting stamp from image fullrun_ccd7_acisf10304_pi14-548_cl_sm2.00.img.gz, (867, 942) - (905, 981)
[Sat Sep 24 01:16:22 2011] Writing fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1.gif
[Sat Sep 24 01:16:29 2011] ../../acisf10304/products/events/fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_src.evt and ../../acisf10304/products/events/fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Sep 24 01:16:29 2011] Size of ../../acisf10304/products/events/fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1033 counts
[Sat Sep 24 01:16:29 2011] Mean chipx,y = (221.67, 520.49)
[Sat Sep 24 01:16:29 2011] Mean tdetx,y = (4138.67, 2222.49)
[Sat Sep 24 01:16:29 2011] chipx,y range = (201.00-242.00, 500.00-540.00)
[Sat Sep 24 01:16:29 2011] Size of ../../acisf10304/products/events/fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 200 counts
[Sat Sep 24 01:16:29 2011] ../../acisf10304/products/images/fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_src.img and ../../acisf10304/products/images/fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Sep 24 01:16:29 2011] ../../acisf10304/products/spectra/fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_src.pi and ../../acisf10304/products/spectra/fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Sep 24 01:16:35 2011] ../../acisf10304/products/lightcurves/fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_src.lc and ../../acisf10304/products/lightcurves/fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Sep 24 01:19:37 2011] Keeping rmf generated by specextract
[Sat Sep 24 01:19:37 2011] 236.06
[Sat Sep 24 01:19:43 2011] Updating aperture counts using extracted products
[Sat Sep 24 01:19:43 2011] Error reading totcts from fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Sep 24 01:19:44 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 01:19:44 2011] Using photon index=1.80, rate=0.0106, arf fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1.arf
[Sat Sep 24 01:19:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 01:19:44 2011] Updating source flux to 8e-14
[Sat Sep 24 01:20:32 2011] Reading fit data from acisf10304/analysis//spectral/fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_pl.csv
[Sat Sep 24 01:20:32 2011] Spectral fit parameter nH value = 4.19217e+20
[Sat Sep 24 01:20:32 2011] Spectral fit parameter PhoIndex value = 1.70002
[Sat Sep 24 01:20:32 2011] Failed to get F(0.3-8.0) from acisf10304/analysis//spectral/fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 01:20:32 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 01:20:32 2011] Using Nh = 4.2e+20, photon index=1.70, rate=0.0106, arf fullrun_ccd7_acisf10304_pi14-548_pass1_cl_src1.arf
[Sat Sep 24 01:20:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 01:20:32 2011] Updating source flux to 8.2e-14