[Sun Oct 2 05:24:36 2011] Detection parameters: Position = (453.4, 233.7) = 12 30 49.06 12 23 30.0 Extent = 0.5" x 0.5", rotation angle = 36 degrees Source counts = 130.0 +/- 13.8 Background counts = 60.0 Rate = 0.03 +/- 0.003 [Sun Oct 2 05:24:40 2011] Off-axis axis estimate = 0.28' [Sun Oct 2 05:25:10 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting [Sun Oct 2 05:25:10 2011] Initial guess for spatial extent in simple fitting = 0.41" [Sun Oct 2 05:25:10 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.283 [Sun Oct 2 05:25:10 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.41" [Sun Oct 2 05:25:11 2011] fullrun_ccd7_acisf10287_pi14-548_cl_pass0_src1.ximg exists [Sun Oct 2 05:25:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10287_pi14-548_cl_pass0_src1.csv [Sun Oct 2 05:25:11 2011] fullrun_ccd7_acisf10287_pi14-548_cl_pass0_src1_1.ximg exists [Sun Oct 2 05:25:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10287_pi14-548_cl_pass0_src1.csv [Sun Oct 2 05:25:11 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf10287_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf10287_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Oct 2 05:25:11 2011] fullrun_ccd7_acisf10287_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Sun Oct 2 05:25:11 2011] fullrun_ccd7_acisf10287_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Sun Oct 2 05:25:11 2011] Fit fullrun_ccd7_acisf10287_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Sun Oct 2 05:25:17 2011] Spatial fit model total counts = 1995.690000, observed total counts = 2015.000000 [Sun Oct 2 05:25:17 2011] Offset between fit and detection position for source 1 = 4.020014 pixels [Sun Oct 2 05:25:17 2011] 1922.117000 total counts/ 1102.970000 bgd. counts: snr = 24.664936 Spatial fit parameters: Offset between fit and detection position for source 1 = 4.020014 pixels Position = (449.7, 232.2) = 12 30 49.20 12 23 29.0 Extent = 1.4 (1.2-1.4)", rotation angle = 0 Source counts = 819.1 +/- 43.8 Background counts = 1103.0 Rate = 0.2 +/- 0.009 [Sun Oct 2 05:25:17 2011] Vigneting correction estimate = 1.000000 [Sun Oct 2 05:25:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Oct 2 05:25:17 2011] Assessing source extent using major axis lower bound [Sun Oct 2 05:25:17 2011] Source does appear to be extended [Sun Oct 2 05:25:17 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Oct 2 05:25:17 2011] Source is confused with source 2 [Sun Oct 2 05:25:17 2011] Source is confused with source 8 [Sun Oct 2 05:25:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Oct 2 05:25:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Oct 2 05:25:21 2011] Initial guess for spatial extent in simple fitting = 1.37" [Sun Oct 2 05:25:21 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.977 [Sun Oct 2 05:25:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.37" [Sun Oct 2 05:25:21 2011] fullrun_ccd7_acisf10287_pi14-548_cl_pass1_src1.ximg exists [Sun Oct 2 05:25:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10287_pi14-548_cl_pass1_src1.csv [Sun Oct 2 05:25:21 2011] fullrun_ccd7_acisf10287_pi14-548_cl_pass1_src1_1.ximg exists [Sun Oct 2 05:25:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10287_pi14-548_cl_pass1_src1.csv [Sun Oct 2 05:25:21 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf10287_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf10287_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Oct 2 05:25:23 2011] fullrun_ccd7_acisf10287_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Sun Oct 2 05:25:23 2011] fullrun_ccd7_acisf10287_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Sun Oct 2 05:25:23 2011] Fit fullrun_ccd7_acisf10287_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Sun Oct 2 05:25:25 2011] Warning, spatial fit 1 centroid is now closest to src. 8 [Sun Oct 2 05:25:25 2011] Source 1 in spatial fitting is no longer close to this source [Sun Oct 2 05:25:25 2011] Source 1 is offset by 3.925630 and 0.555020 pixels which is larger than 2 X fitted extent = 2.967959 x 2.967959, not incorporating fit results [Sun Oct 2 05:25:25 2011] Vigneting correction estimate = 1.000000 [Sun Oct 2 05:25:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Oct 2 05:25:25 2011] Assessing source extent using major axis lower bound [Sun Oct 2 05:25:25 2011] Source does appear to be extended [Sun Oct 2 05:25:25 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Oct 2 05:25:29 2011] Not overwriting source region fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_src.reg [Sun Oct 2 05:25:29 2011] Extracting stamp from image fullrun_ccd7_acisf10287_pi14-548_cl_sm2.00.img.gz, (387, 170) - (512, 295) [Sun Oct 2 05:25:29 2011] Writing fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1.gif [Sun Oct 2 05:25:42 2011] ../../acisf10287/products/events/fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_src.evt and ../../acisf10287/products/events/fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create [Sun Oct 2 05:25:43 2011] Size of ../../acisf10287/products/events/fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_src.evt.gz[events] = 4988 counts [Sun Oct 2 05:25:43 2011] Mean chipx,y = (219.12, 506.54) [Sun Oct 2 05:25:43 2011] Mean tdetx,y = (4136.12, 2208.54) [Sun Oct 2 05:25:43 2011] chipx,y range = (183.00-245.00, 484.00-537.00) [Sun Oct 2 05:25:43 2011] Size of ../../acisf10287/products/events/fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 7011 counts [Sun Oct 2 05:25:43 2011] ../../acisf10287/products/images/fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_src.img and ../../acisf10287/products/images/fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create [Sun Oct 2 05:25:43 2011] ../../acisf10287/products/spectra/fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_src.pi and ../../acisf10287/products/spectra/fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create [Sun Oct 2 05:25:49 2011] ../../acisf10287/products/lightcurves/fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_src.lc and ../../acisf10287/products/lightcurves/fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create [Sun Oct 2 05:26:11 2011] Keeping rmf generated by specextract [Sun Oct 2 05:26:12 2011] 235.9 [Sun Oct 2 05:26:13 2011] Updating aperture counts using extracted products [Sun Oct 2 05:26:13 2011] Error reading totcts from fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_src.pi.gz [Sun Oct 2 05:26:13 2011] Calculating source flux in energy range 0.30-8.00 [Sun Oct 2 05:26:13 2011] Using photon index=1.80, rate=0.174, arf fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1.arf [Sun Oct 2 05:26:13 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sun Oct 2 05:26:13 2011] Updating source flux to 1.3e-12 [Sun Oct 2 05:26:17 2011] Flag b found in src. 1 procflags, skipping spectral fitting [Sun Oct 2 05:26:17 2011] Flag c found in src. 1 procflags, skipping spectral fitting [Sun Oct 2 05:26:40 2011] Reading fit data from acisf10287/analysis//spectral/fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_pl.csv [Sun Oct 2 05:26:40 2011] Spectral fit parameter nH value = 3.01047e+20 [Sun Oct 2 05:26:40 2011] Spectral fit parameter PhoIndex value = 2.26713 [Sun Oct 2 05:26:40 2011] Failed to get F(0.3-8.0) from acisf10287/analysis//spectral/fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Sun Oct 2 05:26:40 2011] Calculating source flux in energy range 0.30-8.00 [Sun Oct 2 05:26:40 2011] Using Nh = 3e+20, photon index=2.27, rate=0.174, arf fullrun_ccd7_acisf10287_pi14-548_pass1_cl_src1.arf [Sun Oct 2 05:26:40 2011] Assuming count rate is from the 0.20-8.00 bandpass [Sun Oct 2 05:26:40 2011] Updating source flux to 1.1e-12