[Tue Oct 4 15:03:36 2011] Detection parameters: Position = (816.4, 120.6) = 12 30 49.05 12 23 30.0 Extent = 0.5" x 0.5", rotation angle = 44 degrees Source counts = 158.1 +/- 15.1 Background counts = 69.9 Rate = 0.03 +/- 0.003 [Tue Oct 4 15:03:36 2011] Off-axis axis estimate = 0.30' [Tue Oct 4 15:03:54 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting [Tue Oct 4 15:03:54 2011] Initial guess for spatial extent in simple fitting = 0.40" [Tue Oct 4 15:03:54 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.288 [Tue Oct 4 15:03:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40" [Tue Oct 4 15:03:56 2011] fullrun_ccd7_acisf10285_pi14-548_cl_pass0_src1.ximg exists [Tue Oct 4 15:03:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10285_pi14-548_cl_pass0_src1.csv [Tue Oct 4 15:03:56 2011] fullrun_ccd7_acisf10285_pi14-548_cl_pass0_src1_1.ximg exists [Tue Oct 4 15:03:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10285_pi14-548_cl_pass0_src1.csv [Tue Oct 4 15:03:56 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf10285_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf10285_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Oct 4 15:03:56 2011] fullrun_ccd7_acisf10285_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Tue Oct 4 15:03:56 2011] fullrun_ccd7_acisf10285_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Tue Oct 4 15:03:56 2011] Fit fullrun_ccd7_acisf10285_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Tue Oct 4 15:03:58 2011] Source 1 is offset by -2.876572 and 2.844101 pixels which is larger than 2 X fitted extent = 0.410809 x 0.410809, not incorporating fit results [Tue Oct 4 15:03:58 2011] Spatial fit model total counts = 1041.570000, observed total counts = 1039.000000 [Tue Oct 4 15:03:58 2011] Offset between fit and detection position for source 1 = 1.567154 pixels [Tue Oct 4 15:03:58 2011] Warning, changing simple spatial fit ID from 1 to 2 [Tue Oct 4 15:03:58 2011] 1069.088000 total counts/ 827.011000 bgd. counts: snr = 8.417786 Spatial fit parameters: Offset between fit and detection position for source 1 = 1.567154 pixels Position = (817.8, 121.3) = 12 30 49.02 12 23 30.1 Extent = 1.5" x 0.5", rotation angle = 351 Source counts = 242.1 +/- 32.7 Background counts = 827.0 Rate = 0.05 +/- 0.007 [Tue Oct 4 15:03:58 2011] Vigneting correction estimate = 1.000000 [Tue Oct 4 15:03:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Oct 4 15:03:58 2011] Assessing source extent using major [Tue Oct 4 15:03:58 2011] Source does appear to be extended [Tue Oct 4 15:03:58 2011] Computing asymmetry using major and minor axis, asym = 3.17 [Tue Oct 4 15:03:58 2011] Source is asymmetric [Tue Oct 4 15:03:58 2011] Source is confused with source 2 [Tue Oct 4 15:04:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Oct 4 15:04:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Oct 4 15:04:03 2011] Initial guess for spatial extent in simple fitting = 0.99" [Tue Oct 4 15:04:03 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.996 [Tue Oct 4 15:04:03 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.99" [Tue Oct 4 15:04:04 2011] fullrun_ccd7_acisf10285_pi14-548_cl_pass1_src1.ximg exists [Tue Oct 4 15:04:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10285_pi14-548_cl_pass1_src1.csv [Tue Oct 4 15:04:04 2011] fullrun_ccd7_acisf10285_pi14-548_cl_pass1_src1_1.ximg exists [Tue Oct 4 15:04:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10285_pi14-548_cl_pass1_src1.csv [Tue Oct 4 15:04:04 2011] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf10285_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf10285_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Oct 4 15:04:04 2011] fullrun_ccd7_acisf10285_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Tue Oct 4 15:04:04 2011] fullrun_ccd7_acisf10285_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Tue Oct 4 15:04:04 2011] Fit fullrun_ccd7_acisf10285_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Tue Oct 4 15:04:05 2011] Warning, spatial fit 1 centroid is now closest to src. 2 [Tue Oct 4 15:04:05 2011] Spatial fit model total counts = 1036.870000, observed total counts = 1039.000000 [Tue Oct 4 15:04:05 2011] Offset between fit and detection position for source 1 = 0.553499 pixels [Tue Oct 4 15:04:05 2011] Warning, changing simple spatial fit ID from 1 to 2 [Tue Oct 4 15:04:05 2011] 1068.415000 total counts/ 803.864000 bgd. counts: snr = 9.330784 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.553499 pixels Position = (817.7, 120.8) = 12 30 49.02 12 23 29.8 Extent = 1.2 (0.7-1.5)", rotation angle = 0 Source counts = 264.6 +/- 32.7 Background counts = 803.9 Rate = 0.06 +/- 0.007 [Tue Oct 4 15:04:05 2011] Vigneting correction estimate = 1.000000 [Tue Oct 4 15:04:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Oct 4 15:04:05 2011] Assessing source extent using major axis lower bound [Tue Oct 4 15:04:05 2011] Source does appear to be extended [Tue Oct 4 15:04:05 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Oct 4 15:04:08 2011] Not overwriting source region fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_src.reg [Tue Oct 4 15:04:08 2011] Extracting stamp from image fullrun_ccd7_acisf10285_pi14-548_cl_sm2.00.img.gz, (762, 65) - (873, 176) [Tue Oct 4 15:04:08 2011] Writing fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1.gif [Tue Oct 4 15:04:09 2011] ../../acisf10285/products/events/fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_src.evt and ../../acisf10285/products/events/fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create [Tue Oct 4 15:04:09 2011] Size of ../../acisf10285/products/events/fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1621 counts [Tue Oct 4 15:04:09 2011] Mean chipx,y = (221.71, 516.66) [Tue Oct 4 15:04:09 2011] Mean tdetx,y = (4138.71, 2218.66) [Tue Oct 4 15:04:09 2011] chipx,y range = (193.00-253.00, 493.00-544.00) [Tue Oct 4 15:04:09 2011] Size of ../../acisf10285/products/events/fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 5244 counts [Tue Oct 4 15:04:09 2011] ../../acisf10285/products/images/fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_src.img and ../../acisf10285/products/images/fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create [Tue Oct 4 15:04:09 2011] ../../acisf10285/products/spectra/fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_src.pi and ../../acisf10285/products/spectra/fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create [Tue Oct 4 15:04:13 2011] ../../acisf10285/products/lightcurves/fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_src.lc and ../../acisf10285/products/lightcurves/fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create [Tue Oct 4 15:04:34 2011] Keeping rmf generated by specextract [Tue Oct 4 15:04:34 2011] 235.445 [Tue Oct 4 15:04:34 2011] Updating aperture counts using extracted products [Tue Oct 4 15:04:34 2011] Error reading totcts from fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_src.pi.gz [Tue Oct 4 15:04:34 2011] Calculating source flux in energy range 0.30-8.00 [Tue Oct 4 15:04:34 2011] Using photon index=1.80, rate=0.0567, arf fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1.arf [Tue Oct 4 15:04:34 2011] Assuming count rate is from the 0.20-8.00 bandpass [Tue Oct 4 15:04:34 2011] Updating source flux to 4.2e-13 [Tue Oct 4 15:04:35 2011] Flag b found in src. 1 procflags, skipping spectral fitting [Tue Oct 4 15:04:35 2011] Flag c found in src. 1 procflags, skipping spectral fitting [Tue Oct 4 15:04:51 2011] Reading fit data from acisf10285/analysis//spectral/fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_pl.csv [Tue Oct 4 15:04:51 2011] Spectral fit parameter nH value = 7.85728e+14 [Tue Oct 4 15:04:51 2011] Spectral fit parameter PhoIndex value = 2.34036 [Tue Oct 4 15:04:51 2011] Failed to get F(0.3-8.0) from acisf10285/analysis//spectral/fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Tue Oct 4 15:04:51 2011] Calculating source flux in energy range 0.30-8.00 [Tue Oct 4 15:04:51 2011] Using Nh = 7.9e+14, photon index=2.34, rate=0.0567, arf fullrun_ccd7_acisf10285_pi14-548_pass1_cl_src1.arf [Tue Oct 4 15:04:51 2011] Assuming count rate is from the 0.20-8.00 bandpass [Tue Oct 4 15:04:51 2011] Updating source flux to 3.7e-13