[Wed Sep 28 16:52:59 2011] Detection parameters:
  Position = (864.3, 736.5) = 9 44 29.37 4 33 43.0
  Extent = 0.9" x 0.6", rotation angle = 59 degrees
  Source counts = 110.7 +/- 10.6
  Background counts = 1.3
  Rate = 0.007 +/- 0.0007

[Wed Sep 28 16:53:00 2011] Off-axis axis estimate = 5.20'
[Wed Sep 28 16:53:50 2011] Using EEF radius (= 1.26 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 16:53:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 16:53:50 2011] Initial guess for spatial extent in simple fitting = 1.26"
[Wed Sep 28 16:53:50 2011] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.115
[Wed Sep 28 16:53:50 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.26"
[Wed Sep 28 16:53:50 2011] fullrun_ccd3_acisf10269_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 16:53:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10269_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 16:53:50 2011] fullrun_ccd3_acisf10269_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 16:53:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10269_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 16:53:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10269_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10269_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 16:53:50 2011] fullrun_ccd3_acisf10269_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 16:53:50 2011] fullrun_ccd3_acisf10269_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 16:53:50 2011] Fit fullrun_ccd3_acisf10269_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 16:54:03 2011] Spatial fit model total counts = 115.000000, observed total counts = 115.000000
[Wed Sep 28 16:54:03 2011] Offset between fit and detection position for source 2 = 0.534335 pixels
[Wed Sep 28 16:54:03 2011] 115.307270 total counts/ 9.693270 bgd. counts: snr = 33.922382
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.534335 pixels
  Position = (864.7, 736.8) = 9 44 29.38 4 33 43.0
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 105.6 +/- 10.7
  Background counts = 9.7
  Rate = 0.007 +/- 0.0007
[Wed Sep 28 16:54:03 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 16:54:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 16:54:03 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 16:54:03 2011] Source does appear to be extended
[Wed Sep 28 16:54:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 16:54:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 16:54:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 16:54:22 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Wed Sep 28 16:54:22 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.958
[Wed Sep 28 16:54:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.88"
[Wed Sep 28 16:54:22 2011] fullrun_ccd3_acisf10269_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 16:54:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10269_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 16:54:22 2011] fullrun_ccd3_acisf10269_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 16:54:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10269_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 16:54:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10269_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10269_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 16:54:22 2011] fullrun_ccd3_acisf10269_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 16:54:22 2011] fullrun_ccd3_acisf10269_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 16:54:22 2011] Fit fullrun_ccd3_acisf10269_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 16:54:30 2011] Spatial fit model total counts = 113.850000, observed total counts = 114.000000
[Wed Sep 28 16:54:30 2011] Offset between fit and detection position for source 2 = 0.104552 pixels
[Wed Sep 28 16:54:30 2011] 114.943700 total counts/ 12.583700 bgd. counts: snr = 28.855334
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.104552 pixels
  Position = (864.7, 736.7) = 9 44 29.38 4 33 42.9
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 102.4 +/- 10.7
  Background counts = 12.6
  Rate = 0.007 +/- 0.0007
[Wed Sep 28 16:54:30 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 16:54:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 16:54:30 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 16:54:30 2011] Source does appear to be extended
[Wed Sep 28 16:54:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 16:57:05 2011] Not overwriting source region fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_src.reg
[Wed Sep 28 16:57:05 2011] Extracting stamp from image fullrun_ccd3_acisf10269_pi14-548_cl_sm2.00.img.gz, (826, 698) - (903, 775)
[Wed Sep 28 16:57:05 2011] Writing fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2.gif
[Wed Sep 28 16:57:06 2011] ../../acisf10269/products/events/fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_src.evt and ../../acisf10269/products/events/fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Sep 28 16:57:06 2011] Size of ../../acisf10269/products/events/fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_src.evt.gz[events] = 110 counts
[Wed Sep 28 16:57:06 2011] Mean chipx,y = (815.90, 401.59)
[Wed Sep 28 16:57:06 2011] Mean tdetx,y = (4730.41, 3876.90)
[Wed Sep 28 16:57:06 2011] chipx,y range = (797.00-832.00, 384.00-421.00)
[Wed Sep 28 16:57:06 2011] Size of ../../acisf10269/products/events/fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 9 counts
[Wed Sep 28 16:57:06 2011] ../../acisf10269/products/images/fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_src.img and ../../acisf10269/products/images/fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Sep 28 16:57:06 2011] ../../acisf10269/products/spectra/fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_src.pi and ../../acisf10269/products/spectra/fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Sep 28 16:57:09 2011] ../../acisf10269/products/lightcurves/fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_src.lc and ../../acisf10269/products/lightcurves/fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Sep 28 16:57:52 2011] Keeping rmf generated by specextract
[Wed Sep 28 16:57:52 2011] 188.027
[Wed Sep 28 16:58:02 2011] Updating aperture counts using extracted products
[Wed Sep 28 16:58:02 2011] Error reading totcts from fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Sep 28 16:58:02 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 16:58:02 2011] Using photon index=1.80, rate=0.00689, arf fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2.arf
[Wed Sep 28 16:58:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 16:58:02 2011] Updating source flux to 8.5e-14
[Wed Sep 28 16:58:16 2011] Reading fit data from acisf10269/analysis//spectral/fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_pl.csv
[Wed Sep 28 16:58:16 2011] Spectral fit parameter nH value = 1.60752e+12
[Wed Sep 28 16:58:16 2011] Spectral fit parameter PhoIndex value = 1.62464
[Wed Sep 28 16:58:16 2011] Failed to get F(0.3-8.0) from acisf10269/analysis//spectral/fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 16:58:16 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 16:58:16 2011] Using Nh = 1.6e+12, photon index=1.62, rate=0.00689, arf fullrun_ccd3_acisf10269_pi14-548_pass1_cl_src2.arf
[Wed Sep 28 16:58:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 16:58:16 2011] Updating source flux to 9.2e-14