[Wed Sep 28 16:52:58 2011] Detection parameters:
  Position = (624.5, 627.1) = 9 44 31.83 4 24 26.9
  Extent = 0.6" x 0.6", rotation angle = 173 degrees
  Source counts = 34.3 +/- 5.9
  Background counts = 0.7
  Rate = 0.002 +/- 0.0004

[Wed Sep 28 16:52:58 2011] Off-axis axis estimate = 5.09'
[Wed Sep 28 16:53:49 2011] Using EEF radius (= 1.22 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 16:53:49 2011] Initial guess for spatial extent in simple fitting = 1.22"
[Wed Sep 28 16:53:49 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.016
[Wed Sep 28 16:53:49 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.22"
[Wed Sep 28 16:53:49 2011] fullrun_ccd2_acisf10269_pi14-548_cl_pass0_src3.ximg exists
[Wed Sep 28 16:53:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10269_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 16:53:49 2011] fullrun_ccd2_acisf10269_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Sep 28 16:53:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10269_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 16:53:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10269_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10269_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 16:53:49 2011] fullrun_ccd2_acisf10269_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep 28 16:53:49 2011] fullrun_ccd2_acisf10269_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep 28 16:53:49 2011] Fit fullrun_ccd2_acisf10269_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep 28 16:54:01 2011] Spatial fit model total counts = 43.357300, observed total counts = 44.000000
[Wed Sep 28 16:54:01 2011] Offset between fit and detection position for source 10 = 0.676479 pixels
[Wed Sep 28 16:54:01 2011] 43.017600 total counts/ 10.729900 bgd. counts: snr = 9.856876
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.676479 pixels
  Position = (625.0, 627.6) = 9 44 31.84 4 24 26.9
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 32.3 +/- 6.6
  Background counts = 10.7
  Rate = 0.002 +/- 0.0004
[Wed Sep 28 16:54:01 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 16:54:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 16:54:01 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 16:54:01 2011] Source does appear to be extended
[Wed Sep 28 16:54:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 16:54:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 16:54:21 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Wed Sep 28 16:54:21 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.912
[Wed Sep 28 16:54:21 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.78"
[Wed Sep 28 16:54:22 2011] fullrun_ccd2_acisf10269_pi14-548_cl_pass1_src3.ximg exists
[Wed Sep 28 16:54:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10269_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 16:54:22 2011] fullrun_ccd2_acisf10269_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Sep 28 16:54:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10269_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 16:54:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10269_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10269_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 16:54:22 2011] fullrun_ccd2_acisf10269_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 28 16:54:22 2011] fullrun_ccd2_acisf10269_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 28 16:54:22 2011] Fit fullrun_ccd2_acisf10269_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 28 16:54:29 2011] Spatial fit model total counts = 41.984600, observed total counts = 43.000000
[Wed Sep 28 16:54:29 2011] Offset between fit and detection position for source 10 = 0.038601 pixels
[Wed Sep 28 16:54:29 2011] 41.789060 total counts/ 8.380460 bgd. counts: snr = 11.540493
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.038601 pixels
  Position = (625.0, 627.6) = 9 44 31.83 4 24 26.9
  Extent = 0.8 (0.7-1.2)", rotation angle = 0
  Source counts = 33.4 +/- 6.5
  Background counts = 8.4
  Rate = 0.002 +/- 0.0004
[Wed Sep 28 16:54:29 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 16:54:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 16:54:29 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 16:54:29 2011] Source does appear to be extended
[Wed Sep 28 16:54:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 16:56:12 2011] Not overwriting source region fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10_src.reg
[Wed Sep 28 16:56:12 2011] Extracting stamp from image fullrun_ccd2_acisf10269_pi14-548_cl_sm2.00.img.gz, (588, 590) - (662, 665)
[Wed Sep 28 16:56:12 2011] Writing fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10.gif
[Wed Sep 28 16:56:19 2011] ../../acisf10269/products/events/fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10_src.evt and ../../acisf10269/products/events/fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Sep 28 16:56:20 2011] Size of ../../acisf10269/products/events/fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10_src.evt.gz[events] = 40 counts
[Wed Sep 28 16:56:20 2011] Mean chipx,y = (456.38, 558.27)
[Wed Sep 28 16:56:20 2011] Mean tdetx,y = (3619.28, 3629.62)
[Wed Sep 28 16:56:20 2011] chipx,y range = (441.00-475.00, 539.00-580.00)
[Wed Sep 28 16:56:20 2011] Size of ../../acisf10269/products/events/fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 8 counts
[Wed Sep 28 16:56:20 2011] ../../acisf10269/products/images/fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10_src.img and ../../acisf10269/products/images/fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Sep 28 16:56:20 2011] ../../acisf10269/products/spectra/fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10_src.pi and ../../acisf10269/products/spectra/fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Sep 28 16:56:20 2011] Not generating rmf since there are only 33 counts
[Wed Sep 28 16:56:24 2011] ../../acisf10269/products/lightcurves/fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10_src.lc and ../../acisf10269/products/lightcurves/fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Sep 28 16:57:05 2011] 181.082
[Wed Sep 28 16:58:02 2011] Updating aperture counts using extracted products
[Wed Sep 28 16:58:02 2011] Error reading totcts from fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Sep 28 16:58:02 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 16:58:02 2011] Using photon index=1.80, rate=0.00225, arf fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10.arf
[Wed Sep 28 16:58:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 16:58:02 2011] Updating source flux to 2.9e-14
[Wed Sep 28 16:58:12 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 16:58:13 2011] acisf10269/analysis//spectral/fullrun_ccd2_acisf10269_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete