[Mon Oct 17 22:15:51 2011] Detection parameters:
  Position = (824.5, 846.9) = 3 16 49.77 0 2 25.6
  Extent = 2.0" x 0.7", rotation angle = 5 degrees
  Source counts = 40.5 +/- 6.9
  Background counts = 6.5
  Rate = 0.004 +/- 0.0006

[Mon Oct 17 22:15:52 2011] Off-axis axis estimate = 6.76'
[Mon Oct 17 22:16:47 2011] Using EEF radius (= 2.04 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 22:16:47 2011] Initial guess for spatial extent in simple fitting = 2.04"
[Mon Oct 17 22:16:47 2011] source mask rpix=4.1, npix_max = 86, mask sum = 82, frac = 0.951
[Mon Oct 17 22:16:47 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.04"
[Mon Oct 17 22:16:47 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 17 22:16:47 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 17 22:16:47 2011] Fit fullrun_ccd3_acisf10267_pi14-548_cl_pass0_src3 appears to have run properly
[Mon Oct 17 22:16:47 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 17 22:16:47 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 17 22:16:47 2011] Fit fullrun_ccd3_acisf10267_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 17 22:16:55 2011] Spatial fit model total counts = 50.636400, observed total counts = 48.000000
[Mon Oct 17 22:16:55 2011] Offset between fit and detection position for source 3 = 1.311229 pixels
[Mon Oct 17 22:16:55 2011] 50.291075 total counts/ 0.969775 bgd. counts: snr = 50.084002
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.311229 pixels
  Position = (825.6, 847.6) = 3 16 49.75 0 2 25.7
  Extent = 2.9 (2.3-3.8)", rotation angle = 356 (349-1) degrees
  Source counts = 49.3 +/- 7.1
  Background counts = 1.0
  Rate = 0.005 +/- 0.0007
[Mon Oct 17 22:16:55 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 22:16:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 22:16:55 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 22:16:55 2011] Source does appear to be extended
[Mon Oct 17 22:16:55 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.36
[Mon Oct 17 22:16:55 2011] Source is asymmetric
[Mon Oct 17 22:17:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 22:17:17 2011] Initial guess for spatial extent in simple fitting = 1.82"
[Mon Oct 17 22:17:17 2011] source mask rpix=3.7, npix_max = 70, mask sum = 73, frac = 1.033
[Mon Oct 17 22:17:17 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.82"
[Mon Oct 17 22:17:18 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 17 22:17:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10267_pi14-548_cl_pass1_src3.csv
[Mon Oct 17 22:17:18 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 17 22:17:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10267_pi14-548_cl_pass1_src3.csv
[Mon Oct 17 22:17:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10267_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10267_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 22:17:18 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 17 22:17:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10267_pi14-548_cl_pass1_tfrozen_src3.csv
[Mon Oct 17 22:17:18 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 17 22:17:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10267_pi14-548_cl_pass1_tfrozen_src3.csv
[Mon Oct 17 22:17:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10267_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10267_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 22:17:24 2011] Spatial fit model total counts = 43.853300, observed total counts = 48.000000
[Mon Oct 17 22:17:24 2011] Offset between fit and detection position for source 3 = 3.777129 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.777129 pixels
  Position = (821.9, 846.9) = 3 16 49.87 0 2 25.4
  Extent = 1.7 (1.5-2.0)", rotation angle = 0
  Source counts = 46.5 +/- 6.8
  Background counts = 0.0
  Rate = 0.004 +/- 0.0006
[Mon Oct 17 22:17:24 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 22:17:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 22:17:24 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 22:17:24 2011] Source does appear to be extended
[Mon Oct 17 22:17:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 22:19:45 2011] Not overwriting source region fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3_src.reg
[Mon Oct 17 22:19:45 2011] Extracting stamp from image fullrun_ccd3_acisf10267_pi14-548_cl_sm2.00.img.gz, (745, 770) - (899, 924)
[Mon Oct 17 22:19:45 2011] Writing fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3.gif
[Mon Oct 17 22:19:51 2011] ../../acisf10267/products/events/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3_src.evt and ../../acisf10267/products/events/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Oct 17 22:19:51 2011] Size of ../../acisf10267/products/events/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3_src.evt.gz[events] = 48 counts
[Mon Oct 17 22:19:51 2011] Mean chipx,y = (490.08, 338.94)
[Mon Oct 17 22:19:51 2011] Mean tdetx,y = (4793.06, 3551.08)
[Mon Oct 17 22:19:51 2011] chipx,y range = (472.00-509.00, 313.00-359.00)
[Mon Oct 17 22:19:51 2011] Size of ../../acisf10267/products/events/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 22 counts
[Mon Oct 17 22:19:51 2011] ../../acisf10267/products/images/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3_src.img and ../../acisf10267/products/images/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Oct 17 22:19:51 2011] ../../acisf10267/products/spectra/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3_src.pi and ../../acisf10267/products/spectra/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Oct 17 22:19:51 2011] Not generating rmf since there are only 46 counts
[Mon Oct 17 22:19:54 2011] ../../acisf10267/products/lightcurves/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3_src.lc and ../../acisf10267/products/lightcurves/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Oct 17 22:20:17 2011] 160.268
[Mon Oct 17 22:20:30 2011] Updating aperture counts using extracted products
[Mon Oct 17 22:20:30 2011] Error reading totcts from fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Oct 17 22:20:31 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 22:20:31 2011] Using photon index=1.80, rate=0.00427, arf fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src3.arf
[Mon Oct 17 22:20:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 22:20:31 2011] Updating source flux to 6.1e-14
[Mon Oct 17 22:20:38 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting