[Mon Oct 17 22:15:51 2011] Detection parameters:
  Position = (456.3, 911.4) = 3 17 1.84 0 2 57.3
  Extent = 1.2" x 0.7", rotation angle = 32 degrees
  Source counts = 145.6 +/- 13.5
  Background counts = 37.4
  Rate = 0.01 +/- 0.001

[Mon Oct 17 22:15:52 2011] Off-axis axis estimate = 7.32'
[Mon Oct 17 22:16:47 2011] Using EEF radius (= 2.37 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 22:16:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 22:16:47 2011] Initial guess for spatial extent in simple fitting = 2.37"
[Mon Oct 17 22:16:47 2011] source mask rpix=4.8, npix_max = 113, mask sum = 121, frac = 1.067
[Mon Oct 17 22:16:47 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.37"
[Mon Oct 17 22:16:47 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 17 22:16:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10267_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 22:16:47 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 17 22:16:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10267_pi14-548_cl_pass0_src1.csv
[Mon Oct 17 22:16:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10267_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10267_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 22:16:47 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 17 22:16:47 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 17 22:16:47 2011] Fit fullrun_ccd3_acisf10267_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 17 22:16:55 2011] Spatial fit model total counts = 135.720000, observed total counts = 136.000000
[Mon Oct 17 22:16:55 2011] Offset between fit and detection position for source 2 = 0.505266 pixels
[Mon Oct 17 22:16:55 2011] 136.157700 total counts/ 29.634700 bgd. counts: snr = 19.567850
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.505266 pixels
  Position = (456.8, 911.4) = 3 17 1.84 0 2 57.1
  Extent = 2.0 (1.7-2.3)", rotation angle = 0
  Source counts = 106.5 +/- 11.7
  Background counts = 29.6
  Rate = 0.01 +/- 0.001
[Mon Oct 17 22:16:55 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 22:16:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 22:16:55 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 22:16:55 2011] Source does appear to be extended
[Mon Oct 17 22:16:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 22:17:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 22:17:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 22:17:17 2011] Initial guess for spatial extent in simple fitting = 1.97"
[Mon Oct 17 22:17:17 2011] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.998
[Mon Oct 17 22:17:17 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.97"
[Mon Oct 17 22:17:18 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 17 22:17:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10267_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 22:17:18 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 17 22:17:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10267_pi14-548_cl_pass1_src1.csv
[Mon Oct 17 22:17:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10267_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10267_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 22:17:18 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 17 22:17:18 2011] fullrun_ccd3_acisf10267_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 17 22:17:18 2011] Fit fullrun_ccd3_acisf10267_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 17 22:17:24 2011] Spatial fit model total counts = 123.160000, observed total counts = 124.000000
[Mon Oct 17 22:17:24 2011] Offset between fit and detection position for source 2 = 0.155004 pixels
[Mon Oct 17 22:17:24 2011] 123.033200 total counts/ 10.256200 bgd. counts: snr = 35.214968
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.155004 pixels
  Position = (457.0, 911.5) = 3 17 1.84 0 2 57.1
  Extent = 2.1 (1.7-2.5)", rotation angle = 0
  Source counts = 112.8 +/- 11.1
  Background counts = 10.3
  Rate = 0.01 +/- 0.001
[Mon Oct 17 22:17:24 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 22:17:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 22:17:24 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 22:17:24 2011] Source does appear to be extended
[Mon Oct 17 22:17:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 22:19:45 2011] Not overwriting source region fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 17 22:19:45 2011] Extracting stamp from image fullrun_ccd3_acisf10267_pi14-548_cl_sm2.00.img.gz, (362, 816) - (552, 1007)
[Mon Oct 17 22:19:45 2011] Writing fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2.gif
[Mon Oct 17 22:19:46 2011] ../../acisf10267/products/events/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_src.evt and ../../acisf10267/products/events/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct 17 22:19:46 2011] Size of ../../acisf10267/products/events/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_src.evt.gz[events] = 125 counts
[Mon Oct 17 22:19:46 2011] Mean chipx,y = (189.22, 558.17)
[Mon Oct 17 22:19:46 2011] Mean tdetx,y = (4573.83, 3250.22)
[Mon Oct 17 22:19:46 2011] chipx,y range = (163.00-210.00, 530.00-586.00)
[Mon Oct 17 22:19:46 2011] Size of ../../acisf10267/products/events/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 73 counts
[Mon Oct 17 22:19:46 2011] ../../acisf10267/products/images/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_src.img and ../../acisf10267/products/images/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct 17 22:19:46 2011] ../../acisf10267/products/spectra/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_src.pi and ../../acisf10267/products/spectra/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Oct 17 22:19:49 2011] ../../acisf10267/products/lightcurves/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_src.lc and ../../acisf10267/products/lightcurves/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct 17 22:20:17 2011] Keeping rmf generated by specextract
[Mon Oct 17 22:20:17 2011] 166.496
[Mon Oct 17 22:20:30 2011] Updating aperture counts using extracted products
[Mon Oct 17 22:20:30 2011] Error reading totcts from fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct 17 22:20:31 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 22:20:31 2011] Using photon index=1.80, rate=0.0103, arf fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2.arf
[Mon Oct 17 22:20:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 22:20:31 2011] Updating source flux to 1.4e-13
[Mon Oct 17 22:20:42 2011] Reading fit data from acisf10267/analysis//spectral/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_pl.csv
[Mon Oct 17 22:20:42 2011] Spectral fit parameter nH value = 2.47332e+21
[Mon Oct 17 22:20:42 2011] Spectral fit parameter PhoIndex value = 1.80879
[Mon Oct 17 22:20:42 2011] Failed to get F(0.3-8.0) from acisf10267/analysis//spectral/fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Oct 17 22:20:42 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 22:20:42 2011] Using Nh = 2.5e+21, photon index=1.81, rate=0.0103, arf fullrun_ccd3_acisf10267_pi14-548_pass1_cl_src2.arf
[Mon Oct 17 22:20:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 22:20:42 2011] Updating source flux to 1.4e-13