[Mon Oct 24 03:57:38 2011] Detection parameters:
  Position = (92.5, 1003.0) = 13 23 15.73 -43 32 38.1
  Extent = 1.6" x 1.2", rotation angle = 90 degrees
  Source counts = 20.2 +/- 4.8
  Background counts = 2.8
  Rate = 0.004 +/- 0.001

[Mon Oct 24 03:57:38 2011] Off-axis axis estimate = 0.49'
[Mon Oct 24 03:58:05 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 03:58:05 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Oct 24 03:58:05 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.890
[Mon Oct 24 03:58:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Mon Oct 24 03:58:06 2011] fullrun_ccd3_acisf10260_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 03:58:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10260_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 03:58:06 2011] fullrun_ccd3_acisf10260_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 03:58:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10260_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 03:58:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10260_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10260_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 03:58:06 2011] fullrun_ccd3_acisf10260_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 03:58:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10260_pi14-548_cl_pass0_tfrozen_src1.csv
[Mon Oct 24 03:58:06 2011] fullrun_ccd3_acisf10260_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 03:58:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10260_pi14-548_cl_pass0_tfrozen_src1.csv
[Mon Oct 24 03:58:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10260_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10260_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 03:58:10 2011] Spatial fit model total counts = 17.592400, observed total counts = 21.000000
[Mon Oct 24 03:58:10 2011] Offset between fit and detection position for source 1 = 1.843710 pixels
[Mon Oct 24 03:58:10 2011] 17.892500 total counts/ 6.271000 bgd. counts: snr = 4.640810
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.843710 pixels
  Position = (93.6, 1004.5) = 13 23 15.71 -43 32 37.6
  Extent = 1.3 (1.0-1.5)" x 0.5 (0.3-1.2)", rotation angle = 19 (0-39) degrees
  Source counts = 11.6 +/- 4.2
  Background counts = 6.3
  Rate = 0.002 +/- 0.0009
[Mon Oct 24 03:58:10 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 03:58:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 03:58:10 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 03:58:10 2011] Source does appear to be extended
[Mon Oct 24 03:58:10 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.85
[Mon Oct 24 03:58:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 03:58:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 03:58:22 2011] Initial guess for spatial extent in simple fitting = 0.90"
[Mon Oct 24 03:58:22 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.145
[Mon Oct 24 03:58:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.90"
[Mon Oct 24 03:58:22 2011] fullrun_ccd3_acisf10260_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 03:58:22 2011] fullrun_ccd3_acisf10260_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 03:58:22 2011] Fit fullrun_ccd3_acisf10260_pi14-548_cl_pass1_src1 appears to have run properly
[Mon Oct 24 03:58:22 2011] fullrun_ccd3_acisf10260_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 03:58:23 2011] fullrun_ccd3_acisf10260_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 03:58:23 2011] Fit fullrun_ccd3_acisf10260_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 03:58:26 2011] Spatial fit model total counts = 19.477100, observed total counts = 20.000000
[Mon Oct 24 03:58:26 2011] Offset between fit and detection position for source 1 = 1.654654 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.654654 pixels
  Position = (93.7, 1002.8) = 13 23 15.70 -43 32 38.5
  Extent = 1.3 (0.9-1.7)", rotation angle = 0
  Source counts = 19.8 +/- 4.5
  Background counts = 0.0
  Rate = 0.004 +/- 0.0009
[Mon Oct 24 03:58:26 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 03:58:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 03:58:26 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 03:58:26 2011] Source does appear to be extended
[Mon Oct 24 03:58:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 03:59:33 2011] Not overwriting source region fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 24 03:59:33 2011] Extracting stamp from image fullrun_ccd3_acisf10260_pi14-548_cl_sm2.00.img.gz, (34, 943) - (153, 1061)
[Mon Oct 24 03:59:33 2011] Writing fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1.gif
[Mon Oct 24 03:59:33 2011] ../../acisf10260/products/events/fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1_src.evt and ../../acisf10260/products/events/fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 24 03:59:33 2011] Size of ../../acisf10260/products/events/fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1_src.evt.gz[events] = 21 counts
[Mon Oct 24 03:59:33 2011] Mean chipx,y = (972.71, 975.81)
[Mon Oct 24 03:59:33 2011] Mean tdetx,y = (4156.19, 4033.71)
[Mon Oct 24 03:59:33 2011] chipx,y range = (955.00-988.00, 954.00-996.00)
[Mon Oct 24 03:59:33 2011] Size of ../../acisf10260/products/events/fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 14 counts
[Mon Oct 24 03:59:33 2011] ../../acisf10260/products/images/fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1_src.img and ../../acisf10260/products/images/fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 24 03:59:33 2011] ../../acisf10260/products/spectra/fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1_src.pi and ../../acisf10260/products/spectra/fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 24 03:59:33 2011] Not generating rmf since there are only 19 counts
[Mon Oct 24 03:59:36 2011] ../../acisf10260/products/lightcurves/fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1_src.lc and ../../acisf10260/products/lightcurves/fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 24 03:59:41 2011] 203.125
[Mon Oct 24 03:59:44 2011] Updating aperture counts using extracted products
[Mon Oct 24 03:59:44 2011] Error reading totcts from fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 24 03:59:44 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 03:59:44 2011] Using photon index=1.80, rate=0.00399, arf fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1.arf
[Mon Oct 24 03:59:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 03:59:44 2011] Updating source flux to 4.4e-14
[Mon Oct 24 03:59:48 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 24 03:59:49 2011] acisf10260/analysis//spectral/fullrun_ccd3_acisf10260_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete