[Thu Oct 27 07:26:51 2011] Detection parameters:
  Position = (1046.9, 919.9) = 10 7 2.67 34 52 38.1
  Extent = 3.0" x 2.3", rotation angle = 53 degrees
  Source counts = 181.1 +/- 14.3
  Background counts = 22.9
  Rate = 0.006 +/- 0.0005

[Thu Oct 27 07:26:53 2011] Off-axis axis estimate = 8.46'
[Thu Oct 27 07:27:37 2011] Using EEF radius (= 3.16 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 07:27:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 07:27:37 2011] Initial guess for spatial extent in simple fitting = 3.16"
[Thu Oct 27 07:27:37 2011] source mask rpix=6.4, npix_max = 192, mask sum = 196, frac = 1.020
[Thu Oct 27 07:27:37 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.16"
[Thu Oct 27 07:27:37 2011] fullrun_ccd1_acisf10252_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 27 07:27:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10252_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 07:27:37 2011] fullrun_ccd1_acisf10252_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 27 07:27:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10252_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 07:27:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10252_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10252_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 07:27:38 2011] fullrun_ccd1_acisf10252_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 27 07:27:38 2011] fullrun_ccd1_acisf10252_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 27 07:27:38 2011] Fit fullrun_ccd1_acisf10252_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 27 07:27:48 2011] Spatial fit model total counts = 213.013000, observed total counts = 213.000000
[Thu Oct 27 07:27:48 2011] Offset between fit and detection position for source 1 = 0.600181 pixels
[Thu Oct 27 07:27:48 2011] 213.758000 total counts/ 34.572000 bgd. counts: snr = 30.474867
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.600181 pixels
  Position = (1047.4, 919.6) = 10 7 2.67 34 52 37.7
  Extent = 2.9 (2.6-3.2)", rotation angle = 0
  Source counts = 179.2 +/- 14.6
  Background counts = 34.6
  Rate = 0.006 +/- 0.0005
[Thu Oct 27 07:27:48 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 07:27:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 07:27:48 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 07:27:48 2011] Source does appear to be extended
[Thu Oct 27 07:27:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 07:28:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 07:28:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 07:28:08 2011] Initial guess for spatial extent in simple fitting = 2.86"
[Thu Oct 27 07:28:08 2011] source mask rpix=5.8, npix_max = 159, mask sum = 169, frac = 1.061
[Thu Oct 27 07:28:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.86"
[Thu Oct 27 07:28:09 2011] fullrun_ccd1_acisf10252_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 27 07:28:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10252_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 07:28:09 2011] fullrun_ccd1_acisf10252_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 27 07:28:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10252_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 07:28:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10252_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10252_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 07:28:09 2011] fullrun_ccd1_acisf10252_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 27 07:28:09 2011] fullrun_ccd1_acisf10252_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 27 07:28:09 2011] Fit fullrun_ccd1_acisf10252_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 27 07:28:16 2011] Spatial fit model total counts = 203.794000, observed total counts = 204.000000
[Thu Oct 27 07:28:16 2011] Offset between fit and detection position for source 1 = 0.052476 pixels
[Thu Oct 27 07:28:16 2011] 204.394100 total counts/ 20.867100 bgd. counts: snr = 40.176206
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.052476 pixels
  Position = (1047.4, 919.6) = 10 7 2.67 34 52 37.7
  Extent = 2.9 (2.7-3.3)", rotation angle = 0
  Source counts = 183.5 +/- 14.3
  Background counts = 20.9
  Rate = 0.006 +/- 0.0005
[Thu Oct 27 07:28:16 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 07:28:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 07:28:16 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 07:28:16 2011] Source does appear to be extended
[Thu Oct 27 07:28:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 07:29:06 2011] Not overwriting source region fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_src.reg
[Thu Oct 27 07:29:06 2011] Extracting stamp from image fullrun_ccd1_acisf10252_pi14-548_cl_sm2.00.img.gz, (913, 785) - (1182, 1054)
[Thu Oct 27 07:29:06 2011] Writing fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1.gif
[Thu Oct 27 07:29:07 2011] ../../acisf10252/products/events/fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_src.evt and ../../acisf10252/products/events/fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct 27 07:29:07 2011] Size of ../../acisf10252/products/events/fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_src.evt.gz[events] = 202 counts
[Thu Oct 27 07:29:07 2011] Mean chipx,y = (895.40, 715.60)
[Thu Oct 27 07:29:07 2011] Mean tdetx,y = (4416.40, 5002.40)
[Thu Oct 27 07:29:07 2011] chipx,y range = (867.00-924.00, 678.00-749.00)
[Thu Oct 27 07:29:07 2011] Size of ../../acisf10252/products/events/fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 226 counts
[Thu Oct 27 07:29:07 2011] ../../acisf10252/products/images/fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_src.img and ../../acisf10252/products/images/fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct 27 07:29:07 2011] ../../acisf10252/products/spectra/fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_src.pi and ../../acisf10252/products/spectra/fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct 27 07:29:09 2011] ../../acisf10252/products/lightcurves/fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_src.lc and ../../acisf10252/products/lightcurves/fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct 27 07:29:46 2011] Keeping rmf generated by specextract
[Thu Oct 27 07:29:46 2011] 171.758
[Thu Oct 27 07:31:47 2011] Updating aperture counts using extracted products
[Thu Oct 27 07:31:47 2011] Error reading totcts from fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct 27 07:31:47 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 07:31:47 2011] Using photon index=1.80, rate=0.00617, arf fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1.arf
[Thu Oct 27 07:31:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 07:31:47 2011] Updating source flux to 8.6e-14
[Thu Oct 27 07:31:56 2011] Reading fit data from acisf10252/analysis//spectral/fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_pl.csv
[Thu Oct 27 07:31:56 2011] Spectral fit parameter nH value = 3.22932e+21
[Thu Oct 27 07:31:56 2011] Spectral fit parameter PhoIndex value = 1.71659
[Thu Oct 27 07:31:56 2011] Failed to get F(0.3-8.0) from acisf10252/analysis//spectral/fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct 27 07:31:56 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 07:31:56 2011] Using Nh = 3.2e+21, photon index=1.72, rate=0.00617, arf fullrun_ccd1_acisf10252_pi14-548_pass1_cl_src1.arf
[Thu Oct 27 07:31:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 07:31:56 2011] Updating source flux to 8.6e-14