[Thu Oct 27 07:26:48 2011] Detection parameters:
  Position = (332.8, 955.2) = 10 6 55.37 34 48 49.4
  Extent = 1.1" x 0.7", rotation angle = 36 degrees
  Source counts = 114.4 +/- 10.9
  Background counts = 4.6
  Rate = 0.004 +/- 0.0004

[Thu Oct 27 07:26:50 2011] Off-axis axis estimate = 5.50'
[Thu Oct 27 07:27:36 2011] Using EEF radius (= 1.39 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 07:27:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 07:27:36 2011] Initial guess for spatial extent in simple fitting = 1.39"
[Thu Oct 27 07:27:36 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.945
[Thu Oct 27 07:27:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.39"
[Thu Oct 27 07:27:36 2011] fullrun_ccd0_acisf10252_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 27 07:27:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10252_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 07:27:37 2011] fullrun_ccd0_acisf10252_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 27 07:27:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10252_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 07:27:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10252_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10252_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 07:27:37 2011] fullrun_ccd0_acisf10252_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 27 07:27:37 2011] fullrun_ccd0_acisf10252_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 27 07:27:37 2011] Fit fullrun_ccd0_acisf10252_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 27 07:27:47 2011] Spatial fit model total counts = 123.725000, observed total counts = 124.000000
[Thu Oct 27 07:27:47 2011] Offset between fit and detection position for source 1 = 0.997047 pixels
[Thu Oct 27 07:27:47 2011] 123.609120 total counts/ 8.938120 bgd. counts: snr = 38.355753
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.997047 pixels
  Position = (333.6, 955.9) = 10 6 55.36 34 48 49.5
  Extent = 1.4 (1.2-1.5)", rotation angle = 0
  Source counts = 114.7 +/- 11.1
  Background counts = 8.9
  Rate = 0.004 +/- 0.0004
[Thu Oct 27 07:27:47 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 07:27:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 07:27:47 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 07:27:47 2011] Source does appear to be extended
[Thu Oct 27 07:27:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 07:28:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 07:28:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 07:28:07 2011] Initial guess for spatial extent in simple fitting = 1.37"
[Thu Oct 27 07:28:07 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.968
[Thu Oct 27 07:28:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.37"
[Thu Oct 27 07:28:08 2011] fullrun_ccd0_acisf10252_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 27 07:28:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10252_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 07:28:08 2011] fullrun_ccd0_acisf10252_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 27 07:28:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10252_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 07:28:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10252_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10252_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 07:28:08 2011] fullrun_ccd0_acisf10252_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 27 07:28:08 2011] fullrun_ccd0_acisf10252_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 27 07:28:08 2011] Fit fullrun_ccd0_acisf10252_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 27 07:28:14 2011] Spatial fit model total counts = 123.735000, observed total counts = 124.000000
[Thu Oct 27 07:28:14 2011] Offset between fit and detection position for source 1 = 0.032322 pixels
[Thu Oct 27 07:28:14 2011] 123.848040 total counts/ 9.346040 bgd. counts: snr = 37.454090
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.032322 pixels
  Position = (333.6, 955.9) = 10 6 55.36 34 48 49.5
  Extent = 1.4 (1.2-1.6)", rotation angle = 0
  Source counts = 114.5 +/- 11.1
  Background counts = 9.3
  Rate = 0.004 +/- 0.0004
[Thu Oct 27 07:28:14 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 07:28:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 07:28:14 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 07:28:14 2011] Source does appear to be extended
[Thu Oct 27 07:28:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 07:28:34 2011] Not overwriting source region fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_src.reg
[Thu Oct 27 07:28:34 2011] Extracting stamp from image fullrun_ccd0_acisf10252_pi14-548_cl_sm2.00.img.gz, (271, 893) - (397, 1019)
[Thu Oct 27 07:28:34 2011] Writing fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1.gif
[Thu Oct 27 07:28:35 2011] ../../acisf10252/products/events/fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_src.evt and ../../acisf10252/products/events/fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct 27 07:28:35 2011] Size of ../../acisf10252/products/events/fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_src.evt.gz[events] = 123 counts
[Thu Oct 27 07:28:35 2011] Mean chipx,y = (449.59, 969.91)
[Thu Oct 27 07:28:35 2011] Mean tdetx,y = (4030.91, 4682.41)
[Thu Oct 27 07:28:35 2011] chipx,y range = (428.00-471.00, 946.00-991.00)
[Thu Oct 27 07:28:35 2011] Size of ../../acisf10252/products/events/fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 54 counts
[Thu Oct 27 07:28:35 2011] ../../acisf10252/products/images/fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_src.img and ../../acisf10252/products/images/fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct 27 07:28:35 2011] ../../acisf10252/products/spectra/fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_src.pi and ../../acisf10252/products/spectra/fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct 27 07:28:38 2011] ../../acisf10252/products/lightcurves/fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_src.lc and ../../acisf10252/products/lightcurves/fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct 27 07:29:05 2011] Keeping rmf generated by specextract
[Thu Oct 27 07:29:05 2011] 185.838
[Thu Oct 27 07:31:47 2011] Updating aperture counts using extracted products
[Thu Oct 27 07:31:47 2011] Error reading totcts from fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct 27 07:31:47 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 07:31:47 2011] Using photon index=1.80, rate=0.00385, arf fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1.arf
[Thu Oct 27 07:31:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 07:31:47 2011] Updating source flux to 4.9e-14
[Thu Oct 27 07:31:53 2011] Reading fit data from acisf10252/analysis//spectral/fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_pl.csv
[Thu Oct 27 07:31:53 2011] Spectral fit parameter nH value = 4.17107e+15
[Thu Oct 27 07:31:53 2011] Spectral fit parameter PhoIndex value = 5.01919
[Thu Oct 27 07:31:53 2011] Failed to get F(0.3-8.0) from acisf10252/analysis//spectral/fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct 27 07:31:53 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 07:31:53 2011] Using Nh = 4.2e+15, photon index=5.02, rate=0.00385, arf fullrun_ccd0_acisf10252_pi14-548_pass1_cl_src1.arf
[Thu Oct 27 07:31:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 07:31:53 2011] Updating source flux to 2.2e-13