[Mon Sep 26 15:34:19 2011] Detection parameters:
  Position = (817.2, 792.2) = 10 5 57.50 34 48 48.8
  Extent = 1.2" x 0.7", rotation angle = 59 degrees
  Source counts = 132.6 +/- 11.7
  Background counts = 4.4
  Rate = 0.003 +/- 0.0003

[Mon Sep 26 15:34:21 2011] Off-axis axis estimate = 5.36'
[Mon Sep 26 15:35:22 2011] Using EEF radius (= 1.33 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 15:35:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 15:35:22 2011] Initial guess for spatial extent in simple fitting = 1.33"
[Mon Sep 26 15:35:22 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.875
[Mon Sep 26 15:35:22 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.33"
[Mon Sep 26 15:35:22 2011] fullrun_ccd3_acisf10249_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 15:35:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10249_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 15:35:22 2011] fullrun_ccd3_acisf10249_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 15:35:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10249_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 15:35:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10249_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10249_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 15:35:23 2011] fullrun_ccd3_acisf10249_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 15:35:23 2011] fullrun_ccd3_acisf10249_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 15:35:23 2011] Fit fullrun_ccd3_acisf10249_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 15:35:36 2011] Spatial fit model total counts = 144.844000, observed total counts = 146.000000
[Mon Sep 26 15:35:36 2011] Offset between fit and detection position for source 2 = 0.849366 pixels
[Mon Sep 26 15:35:36 2011] 144.077300 total counts/ 12.622300 bgd. counts: snr = 37.000523
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.849366 pixels
  Position = (817.7, 792.9) = 10 5 57.50 34 48 48.9
  Extent = 1.3 (1.1-1.4)", rotation angle = 0
  Source counts = 131.5 +/- 12.0
  Background counts = 12.6
  Rate = 0.003 +/- 0.0003
[Mon Sep 26 15:35:36 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 15:35:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 15:35:36 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 15:35:36 2011] Source does appear to be extended
[Mon Sep 26 15:35:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 15:35:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 15:35:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 15:35:58 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Mon Sep 26 15:35:58 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Mon Sep 26 15:35:58 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.28"
[Mon Sep 26 15:35:58 2011] fullrun_ccd3_acisf10249_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 15:35:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10249_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 15:35:58 2011] fullrun_ccd3_acisf10249_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 15:35:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10249_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 15:35:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10249_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10249_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 15:35:59 2011] fullrun_ccd3_acisf10249_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 15:35:59 2011] fullrun_ccd3_acisf10249_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 15:35:59 2011] Fit fullrun_ccd3_acisf10249_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 15:36:11 2011] Spatial fit model total counts = 145.879000, observed total counts = 146.000000
[Mon Sep 26 15:36:11 2011] Offset between fit and detection position for source 2 = 0.063184 pixels
[Mon Sep 26 15:36:11 2011] 144.812700 total counts/ 15.833700 bgd. counts: snr = 32.413640
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.063184 pixels
  Position = (817.7, 792.9) = 10 5 57.50 34 48 48.9
  Extent = 1.2 (1.1-1.4)", rotation angle = 0
  Source counts = 129.0 +/- 12.0
  Background counts = 15.8
  Rate = 0.003 +/- 0.0003
[Mon Sep 26 15:36:11 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 15:36:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 15:36:11 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 15:36:11 2011] Source does appear to be extended
[Mon Sep 26 15:36:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 15:40:27 2011] Not overwriting source region fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_src.reg
[Mon Sep 26 15:40:27 2011] Extracting stamp from image fullrun_ccd3_acisf10249_pi14-548_cl_sm2.00.img.gz, (761, 736) - (874, 850)
[Mon Sep 26 15:40:27 2011] Writing fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2.gif
[Mon Sep 26 15:40:28 2011] ../../acisf10249/products/events/fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_src.evt and ../../acisf10249/products/events/fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Sep 26 15:40:28 2011] Size of ../../acisf10249/products/events/fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_src.evt.gz[events] = 140 counts
[Mon Sep 26 15:40:28 2011] Mean chipx,y = (365.69, 728.69)
[Mon Sep 26 15:40:28 2011] Mean tdetx,y = (4403.31, 3426.69)
[Mon Sep 26 15:40:28 2011] chipx,y range = (345.00-389.00, 711.00-753.00)
[Mon Sep 26 15:40:29 2011] Size of ../../acisf10249/products/events/fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 53 counts
[Mon Sep 26 15:40:29 2011] ../../acisf10249/products/images/fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_src.img and ../../acisf10249/products/images/fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Sep 26 15:40:29 2011] ../../acisf10249/products/spectra/fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_src.pi and ../../acisf10249/products/spectra/fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Sep 26 15:40:32 2011] ../../acisf10249/products/lightcurves/fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_src.lc and ../../acisf10249/products/lightcurves/fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Sep 26 15:41:37 2011] Keeping rmf generated by specextract
[Mon Sep 26 15:41:37 2011] 180.458
[Mon Sep 26 15:41:42 2011] Updating aperture counts using extracted products
[Mon Sep 26 15:41:42 2011] Error reading totcts from fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Sep 26 15:41:42 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 15:41:42 2011] Using photon index=1.80, rate=0.00318, arf fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2.arf
[Mon Sep 26 15:41:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 15:41:42 2011] Updating source flux to 4.2e-14
[Mon Sep 26 15:42:09 2011] Reading fit data from acisf10249/analysis//spectral/fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_pl.csv
[Mon Sep 26 15:42:09 2011] Spectral fit parameter nH value = 5.87551e+21
[Mon Sep 26 15:42:09 2011] Spectral fit parameter PhoIndex value = 1.47258
[Mon Sep 26 15:42:09 2011] Failed to get F(0.3-8.0) from acisf10249/analysis//spectral/fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 15:42:09 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 15:42:09 2011] Using Nh = 5.9e+21, photon index=1.47, rate=0.00318, arf fullrun_ccd3_acisf10249_pi14-548_pass1_cl_src2.arf
[Mon Sep 26 15:42:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 15:42:09 2011] Updating source flux to 5.2e-14