[Mon Sep 26 15:34:15 2011] Detection parameters:
  Position = (395.7, 529.5) = 10 6 55.37 34 48 50.1
  Extent = 3.0" x 2.1", rotation angle = 150 degrees
  Source counts = 119.1 +/- 12.0
  Background counts = 23.9
  Rate = 0.003 +/- 0.0003

[Mon Sep 26 15:34:17 2011] Off-axis axis estimate = 8.60'
[Mon Sep 26 15:35:15 2011] Using EEF radius (= 3.27 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 15:35:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 15:35:15 2011] Initial guess for spatial extent in simple fitting = 3.27"
[Mon Sep 26 15:35:15 2011] source mask rpix=6.6, npix_max = 204, mask sum = 194, frac = 0.951
[Mon Sep 26 15:35:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.27"
[Mon Sep 26 15:35:15 2011] fullrun_ccd1_acisf10249_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 15:35:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10249_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 15:35:15 2011] fullrun_ccd1_acisf10249_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 15:35:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10249_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 15:35:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10249_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10249_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 15:35:15 2011] fullrun_ccd1_acisf10249_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 15:35:15 2011] fullrun_ccd1_acisf10249_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 15:35:15 2011] Fit fullrun_ccd1_acisf10249_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 15:35:31 2011] Spatial fit model total counts = 172.409000, observed total counts = 173.000000
[Mon Sep 26 15:35:31 2011] Offset between fit and detection position for source 1 = 1.283826 pixels
[Mon Sep 26 15:35:31 2011] 172.424400 total counts/ 49.970400 bgd. counts: snr = 17.322739
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.283826 pixels
  Position = (397.0, 529.5) = 10 6 55.34 34 48 49.9
  Extent = 2.4 (2.1-2.9)", rotation angle = 0
  Source counts = 122.5 +/- 13.1
  Background counts = 50.0
  Rate = 0.003 +/- 0.0003
[Mon Sep 26 15:35:31 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 15:35:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 15:35:31 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 15:35:31 2011] Source does appear to be extended
[Mon Sep 26 15:35:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 15:35:55 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 15:35:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 15:35:55 2011] Initial guess for spatial extent in simple fitting = 2.45"
[Mon Sep 26 15:35:55 2011] source mask rpix=5.0, npix_max = 119, mask sum = 98, frac = 0.817
[Mon Sep 26 15:35:55 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.45"
[Mon Sep 26 15:35:56 2011] fullrun_ccd1_acisf10249_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 15:35:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10249_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 15:35:56 2011] fullrun_ccd1_acisf10249_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 15:35:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10249_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 15:35:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10249_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10249_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 15:35:56 2011] fullrun_ccd1_acisf10249_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 15:35:56 2011] fullrun_ccd1_acisf10249_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 15:35:56 2011] Fit fullrun_ccd1_acisf10249_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 15:36:08 2011] Spatial fit model total counts = 152.503000, observed total counts = 152.000000
[Mon Sep 26 15:36:08 2011] Offset between fit and detection position for source 1 = 0.253566 pixels
[Mon Sep 26 15:36:08 2011] 152.588100 total counts/ 34.381100 bgd. counts: snr = 20.159665
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.253566 pixels
  Position = (397.2, 529.4) = 10 6 55.33 34 48 49.8
  Extent = 2.4 (1.9-2.8)", rotation angle = 0
  Source counts = 118.2 +/- 12.4
  Background counts = 34.4
  Rate = 0.003 +/- 0.0003
[Mon Sep 26 15:36:08 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 15:36:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 15:36:08 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 15:36:08 2011] Source does appear to be extended
[Mon Sep 26 15:36:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 15:38:01 2011] Not overwriting source region fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_src.reg
[Mon Sep 26 15:38:01 2011] Extracting stamp from image fullrun_ccd1_acisf10249_pi14-548_cl_sm2.00.img.gz, (289, 421) - (506, 638)
[Mon Sep 26 15:38:01 2011] Writing fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1.gif
[Mon Sep 26 15:38:03 2011] ../../acisf10249/products/events/fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_src.evt and ../../acisf10249/products/events/fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Sep 26 15:38:03 2011] Size of ../../acisf10249/products/events/fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_src.evt.gz[events] = 144 counts
[Mon Sep 26 15:38:03 2011] Mean chipx,y = (724.81, 363.17)
[Mon Sep 26 15:38:03 2011] Mean tdetx,y = (4768.83, 4831.81)
[Mon Sep 26 15:38:03 2011] chipx,y range = (694.00-754.00, 337.00-388.00)
[Mon Sep 26 15:38:03 2011] Size of ../../acisf10249/products/events/fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 154 counts
[Mon Sep 26 15:38:03 2011] ../../acisf10249/products/images/fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_src.img and ../../acisf10249/products/images/fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Sep 26 15:38:03 2011] ../../acisf10249/products/spectra/fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_src.pi and ../../acisf10249/products/spectra/fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Sep 26 15:38:08 2011] ../../acisf10249/products/lightcurves/fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_src.lc and ../../acisf10249/products/lightcurves/fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Sep 26 15:39:33 2011] Keeping rmf generated by specextract
[Mon Sep 26 15:39:33 2011] 169.027
[Mon Sep 26 15:41:41 2011] Updating aperture counts using extracted products
[Mon Sep 26 15:41:41 2011] Error reading totcts from fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Sep 26 15:41:41 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 15:41:41 2011] Using photon index=1.80, rate=0.00292, arf fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1.arf
[Mon Sep 26 15:41:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 15:41:41 2011] Updating source flux to 4.2e-14
[Mon Sep 26 15:41:53 2011] Reading fit data from acisf10249/analysis//spectral/fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_pl.csv
[Mon Sep 26 15:41:53 2011] Spectral fit parameter nH value = 6.07569e+21
[Mon Sep 26 15:41:53 2011] Spectral fit parameter PhoIndex value = 9.05177
[Mon Sep 26 15:41:53 2011] Failed to get F(0.3-8.0) from acisf10249/analysis//spectral/fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 15:41:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 15:41:53 2011] Using Nh = 6.1e+21, photon index=9.05, rate=0.00292, arf fullrun_ccd1_acisf10249_pi14-548_pass1_cl_src1.arf
[Mon Sep 26 15:41:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 15:41:53 2011] Updating source flux to 5.7e-14