[Sat Oct  1 13:15:15 2011] Detection parameters:
  Position = (438.6, 1196.2) = 15 52 2.34 20 14 1.5
  Extent = 2.2" x 1.8", rotation angle = 171 degrees
  Source counts = 1450.7 +/- 41.1
  Background counts = 242.3
  Rate = 0.04 +/- 0.001

[Sat Oct  1 13:15:17 2011] Off-axis axis estimate = 10.25'
[Sat Oct  1 13:16:09 2011] Using EEF radius (= 4.66 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 13:16:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 13:16:09 2011] Initial guess for spatial extent in simple fitting = 4.66"
[Sat Oct  1 13:16:09 2011] source mask rpix=9.5, npix_max = 397, mask sum = 400, frac = 1.006
[Sat Oct  1 13:16:09 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.66"
[Sat Oct  1 13:16:10 2011] fullrun_ccd2_acisf10244_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  1 13:16:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10244_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 13:16:10 2011] fullrun_ccd2_acisf10244_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  1 13:16:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10244_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 13:16:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10244_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10244_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 13:16:10 2011] fullrun_ccd2_acisf10244_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  1 13:16:10 2011] fullrun_ccd2_acisf10244_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  1 13:16:10 2011] Fit fullrun_ccd2_acisf10244_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  1 13:16:20 2011] Spatial fit model total counts = 1780.030000, observed total counts = 1772.000000
[Sat Oct  1 13:16:20 2011] Offset between fit and detection position for source 1 = 0.696131 pixels
[Sat Oct  1 13:16:20 2011] 1780.991000 total counts/ 197.591000 bgd. counts: snr = 112.643740
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.696131 pixels
  Position = (439.2, 1196.6) = 15 52 2.34 20 14 1.4
  Extent = 4.0 (3.8-4.2)", rotation angle = 0
  Source counts = 1583.4 +/- 42.2
  Background counts = 197.6
  Rate = 0.04 +/- 0.001
[Sat Oct  1 13:16:20 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 13:16:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 13:16:20 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 13:16:20 2011] Source does appear to be extended
[Sat Oct  1 13:16:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 13:16:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 13:16:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 13:16:44 2011] Initial guess for spatial extent in simple fitting = 3.99"
[Sat Oct  1 13:16:44 2011] source mask rpix=8.1, npix_max = 295, mask sum = 289, frac = 0.977
[Sat Oct  1 13:16:44 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.99"
[Sat Oct  1 13:16:44 2011] fullrun_ccd2_acisf10244_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  1 13:16:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10244_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 13:16:44 2011] fullrun_ccd2_acisf10244_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  1 13:16:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10244_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 13:16:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10244_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10244_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 13:16:44 2011] fullrun_ccd2_acisf10244_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  1 13:16:44 2011] fullrun_ccd2_acisf10244_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  1 13:16:44 2011] Fit fullrun_ccd2_acisf10244_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  1 13:16:54 2011] Spatial fit model total counts = 1747.780000, observed total counts = 1742.000000
[Sat Oct  1 13:16:54 2011] Offset between fit and detection position for source 1 = 0.157110 pixels
[Sat Oct  1 13:16:54 2011] 1748.931000 total counts/ 216.531000 bgd. counts: snr = 104.138688
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.157110 pixels
  Position = (439.0, 1196.6) = 15 52 2.34 20 14 1.4
  Extent = 3.9 (3.7-4.0)", rotation angle = 0
  Source counts = 1532.4 +/- 41.8
  Background counts = 216.5
  Rate = 0.04 +/- 0.001
[Sat Oct  1 13:16:54 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 13:16:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 13:16:54 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 13:16:54 2011] Source does appear to be extended
[Sat Oct  1 13:16:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 13:19:26 2011] Not overwriting source region fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_src.reg
[Sat Oct  1 13:19:26 2011] Extracting stamp from image fullrun_ccd2_acisf10244_pi14-548_cl_sm2.00.img.gz, (263, 1020) - (615, 1373)
[Sat Oct  1 13:19:26 2011] Writing fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1.gif
[Sat Oct  1 13:19:28 2011] ../../acisf10244/products/events/fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_src.evt and ../../acisf10244/products/events/fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct  1 13:19:28 2011] Size of ../../acisf10244/products/events/fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1720 counts
[Sat Oct  1 13:19:28 2011] Mean chipx,y = (800.24, 26.67)
[Sat Oct  1 13:19:28 2011] Mean tdetx,y = (3087.67, 3285.76)
[Sat Oct  1 13:19:28 2011] chipx,y range = (757.00-845.00, 3.00-66.00)
[Sat Oct  1 13:19:29 2011] Size of ../../acisf10244/products/events/fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 224 counts
[Sat Oct  1 13:19:29 2011] ../../acisf10244/products/images/fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_src.img and ../../acisf10244/products/images/fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct  1 13:19:29 2011] ../../acisf10244/products/spectra/fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_src.pi and ../../acisf10244/products/spectra/fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct  1 13:19:32 2011] ../../acisf10244/products/lightcurves/fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_src.lc and ../../acisf10244/products/lightcurves/fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct  1 13:20:28 2011] Keeping rmf generated by specextract
[Sat Oct  1 13:20:28 2011] 145.184
[Sat Oct  1 13:22:08 2011] Updating aperture counts using extracted products
[Sat Oct  1 13:22:08 2011] Error reading totcts from fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct  1 13:22:08 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 13:22:08 2011] Using photon index=1.80, rate=0.0429, arf fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 13:22:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 13:22:08 2011] Updating source flux to 7e-13
[Sat Oct  1 13:22:26 2011] Reading fit data from acisf10244/analysis//spectral/fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct  1 13:22:26 2011] Spectral fit parameter nH value = 7.75059e+19
[Sat Oct  1 13:22:26 2011] Spectral fit parameter PhoIndex value = 2.02415
[Sat Oct  1 13:22:26 2011] Failed to get F(0.3-8.0) from acisf10244/analysis//spectral/fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 13:22:26 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 13:22:26 2011] Using Nh = 7.8e+19, photon index=2.02, rate=0.0429, arf fullrun_ccd2_acisf10244_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 13:22:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 13:22:26 2011] Updating source flux to 7.2e-13