[Fri Oct 21 11:27:51 2011] Detection parameters:
  Position = (323.7, 413.7) = 15 51 55.71 20 1 29.9
  Extent = 1.0" x 0.5", rotation angle = 22 degrees
  Source counts = 30.8 +/- 5.7
  Background counts = 1.2
  Rate = 0.002 +/- 0.0003

[Fri Oct 21 11:27:51 2011] Off-axis axis estimate = 4.75'
[Fri Oct 21 11:28:29 2011] Using EEF radius (= 1.08 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:28:29 2011] Initial guess for spatial extent in simple fitting = 1.08"
[Fri Oct 21 11:28:29 2011] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.754
[Fri Oct 21 11:28:29 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.08"
[Fri Oct 21 11:28:30 2011] fullrun_ccd2_acisf10242_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 21 11:28:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10242_pi14-548_cl_pass0_src3.csv
[Fri Oct 21 11:28:30 2011] fullrun_ccd2_acisf10242_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 21 11:28:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10242_pi14-548_cl_pass0_src3.csv
[Fri Oct 21 11:28:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10242_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10242_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:28:30 2011] fullrun_ccd2_acisf10242_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 21 11:28:30 2011] fullrun_ccd2_acisf10242_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 21 11:28:30 2011] Fit fullrun_ccd2_acisf10242_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 21 11:28:37 2011] Spatial fit model total counts = 41.451100, observed total counts = 44.000000
[Fri Oct 21 11:28:37 2011] Offset between fit and detection position for source 11 = 0.980901 pixels
[Fri Oct 21 11:28:37 2011] 41.629640 total counts/ 7.390140 bgd. counts: snr = 12.595084
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.980901 pixels
  Position = (324.0, 414.6) = 15 51 55.72 20 1 30.2
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 34.2 +/- 6.5
  Background counts = 7.4
  Rate = 0.002 +/- 0.0004
[Fri Oct 21 11:28:37 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:28:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:28:37 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:28:37 2011] Source does appear to be extended
[Fri Oct 21 11:28:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:28:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 11:28:52 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Fri Oct 21 11:28:52 2011] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.732
[Fri Oct 21 11:28:52 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.87"
[Fri Oct 21 11:28:52 2011] fullrun_ccd2_acisf10242_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 21 11:28:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10242_pi14-548_cl_pass1_src3.csv
[Fri Oct 21 11:28:52 2011] fullrun_ccd2_acisf10242_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 21 11:28:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10242_pi14-548_cl_pass1_src3.csv
[Fri Oct 21 11:28:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10242_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10242_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 11:28:53 2011] fullrun_ccd2_acisf10242_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 21 11:28:53 2011] fullrun_ccd2_acisf10242_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 21 11:28:53 2011] Fit fullrun_ccd2_acisf10242_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 21 11:28:59 2011] Spatial fit model total counts = 42.693000, observed total counts = 44.000000
[Fri Oct 21 11:28:59 2011] Offset between fit and detection position for source 11 = 0.033911 pixels
[Fri Oct 21 11:28:59 2011] 42.898880 total counts/ 7.898580 bgd. counts: snr = 12.453667
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.033911 pixels
  Position = (324.0, 414.6) = 15 51 55.72 20 1 30.2
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 35.0 +/- 6.5
  Background counts = 7.9
  Rate = 0.002 +/- 0.0004
[Fri Oct 21 11:28:59 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 11:28:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 11:28:59 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 11:28:59 2011] Source does appear to be extended
[Fri Oct 21 11:28:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 11:29:51 2011] Not overwriting source region fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11_src.reg
[Fri Oct 21 11:29:51 2011] Extracting stamp from image fullrun_ccd2_acisf10242_pi14-548_cl_sm2.00.img.gz, (285, 376) - (363, 453)
[Fri Oct 21 11:29:51 2011] Writing fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11.gif
[Fri Oct 21 11:29:58 2011] ../../acisf10242/products/events/fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11_src.evt and ../../acisf10242/products/events/fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Fri Oct 21 11:29:58 2011] Size of ../../acisf10242/products/events/fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11_src.evt.gz[events] = 42 counts
[Fri Oct 21 11:29:58 2011] Mean chipx,y = (630.29, 899.17)
[Fri Oct 21 11:29:58 2011] Mean tdetx,y = (3960.17, 3455.71)
[Fri Oct 21 11:29:58 2011] chipx,y range = (613.00-648.00, 881.00-915.00)
[Fri Oct 21 11:29:58 2011] Size of ../../acisf10242/products/events/fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 18 counts
[Fri Oct 21 11:29:58 2011] ../../acisf10242/products/images/fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11_src.img and ../../acisf10242/products/images/fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Fri Oct 21 11:29:58 2011] ../../acisf10242/products/spectra/fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11_src.pi and ../../acisf10242/products/spectra/fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Fri Oct 21 11:29:58 2011] Not generating rmf since there are only 35 counts
[Fri Oct 21 11:30:00 2011] ../../acisf10242/products/lightcurves/fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11_src.lc and ../../acisf10242/products/lightcurves/fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Fri Oct 21 11:30:22 2011] 177.921
[Fri Oct 21 11:31:25 2011] Updating aperture counts using extracted products
[Fri Oct 21 11:31:25 2011] Error reading totcts from fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11_src.pi.gz
[Fri Oct 21 11:31:25 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 11:31:25 2011] Using photon index=1.80, rate=0.00191, arf fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11.arf
[Fri Oct 21 11:31:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 11:31:25 2011] Updating source flux to 2.5e-14
[Fri Oct 21 11:31:35 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 21 11:31:36 2011] acisf10242/analysis//spectral/fullrun_ccd2_acisf10242_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete