[Sat Oct 29 04:02:54 2011] Detection parameters:
  Position = (478.3, 161.4) = 12 29 38.63 11 33 58.1
  Extent = 1.9" x 0.7", rotation angle = 71 degrees
  Source counts = 11.0 +/- 3.7
  Background counts = 3.0
  Rate = 0.0004 +/- 0.0001

[Sat Oct 29 04:02:54 2011] Off-axis axis estimate = 7.83'
[Sat Oct 29 04:03:52 2011] Using EEF radius (= 2.71 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 04:03:52 2011] Initial guess for spatial extent in simple fitting = 2.71"
[Sat Oct 29 04:03:52 2011] source mask rpix=5.5, npix_max = 144, mask sum = 144, frac = 0.995
[Sat Oct 29 04:03:52 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 2.71"
[Sat Oct 29 04:03:52 2011] fullrun_ccd3_acisf10241_pi14-548_cl_pass0_src10.ximg exists
[Sat Oct 29 04:03:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10241_pi14-548_cl_pass0_src10.csv
[Sat Oct 29 04:03:52 2011] fullrun_ccd3_acisf10241_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Oct 29 04:03:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10241_pi14-548_cl_pass0_src10.csv
[Sat Oct 29 04:03:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10241_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10241_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 04:03:52 2011] fullrun_ccd3_acisf10241_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Oct 29 04:03:52 2011] fullrun_ccd3_acisf10241_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Oct 29 04:03:52 2011] Fit fullrun_ccd3_acisf10241_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Oct 29 04:04:05 2011] Spatial fit model total counts = 30.992900, observed total counts = 31.000000
[Sat Oct 29 04:04:05 2011] Offset between fit and detection position for source 10 = 1.894090 pixels
[Sat Oct 29 04:04:05 2011] 30.882890 total counts/ 23.766000 bgd. counts: snr = 1.459863
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.894090 pixels
  Position = (477.8, 159.5) = 12 29 38.67 11 33 57.0
  Extent = 1.1 (0.7-2.1)", rotation angle = 0
  Source counts = 7.1 +/- 5.6
  Background counts = 23.8
  Rate = 0.0002 +/- 0.0002
  Deleting source due to low Poisson probability