[Sat Oct 29 04:02:51 2011] Detection parameters:
  Position = (470.1, 889.5) = 12 30 13.80 11 39 53.4
  Extent = 1.0" x 0.7", rotation angle = 13 degrees
  Source counts = 78.1 +/- 9.1
  Background counts = 3.9
  Rate = 0.003 +/- 0.0003

[Sat Oct 29 04:02:52 2011] Off-axis axis estimate = 5.55'
[Sat Oct 29 04:03:50 2011] Using EEF radius (= 1.41 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 04:03:50 2011] Initial guess for spatial extent in simple fitting = 1.41"
[Sat Oct 29 04:03:50 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.076
[Sat Oct 29 04:03:50 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.41"
[Sat Oct 29 04:03:51 2011] fullrun_ccd1_acisf10241_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 29 04:03:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10241_pi14-548_cl_pass0_src3.csv
[Sat Oct 29 04:03:51 2011] fullrun_ccd1_acisf10241_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 29 04:03:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10241_pi14-548_cl_pass0_src3.csv
[Sat Oct 29 04:03:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10241_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10241_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 04:03:51 2011] fullrun_ccd1_acisf10241_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 29 04:03:51 2011] fullrun_ccd1_acisf10241_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 29 04:03:51 2011] Fit fullrun_ccd1_acisf10241_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct 29 04:04:02 2011] Spatial fit model total counts = 87.483300, observed total counts = 87.000000
[Sat Oct 29 04:04:02 2011] Offset between fit and detection position for source 4 = 0.913142 pixels
[Sat Oct 29 04:04:02 2011] 87.185600 total counts/ 13.902100 bgd. counts: snr = 19.654681
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.913142 pixels
  Position = (470.8, 890.1) = 12 30 13.79 11 39 53.5
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 73.3 +/- 9.3
  Background counts = 13.9
  Rate = 0.002 +/- 0.0003
[Sat Oct 29 04:04:02 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 04:04:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 04:04:02 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 04:04:02 2011] Source does appear to be extended
[Sat Oct 29 04:04:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 04:04:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 04:04:23 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Sat Oct 29 04:04:23 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.013
[Sat Oct 29 04:04:23 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.98"
[Sat Oct 29 04:04:28 2011] fullrun_ccd1_acisf10241_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct 29 04:04:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10241_pi14-548_cl_pass1_src3.csv
[Sat Oct 29 04:04:28 2011] fullrun_ccd1_acisf10241_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct 29 04:04:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10241_pi14-548_cl_pass1_src3.csv
[Sat Oct 29 04:04:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10241_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10241_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 04:04:28 2011] fullrun_ccd1_acisf10241_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct 29 04:04:28 2011] fullrun_ccd1_acisf10241_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct 29 04:04:28 2011] Fit fullrun_ccd1_acisf10241_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct 29 04:04:38 2011] Spatial fit model total counts = 83.039400, observed total counts = 83.000000
[Sat Oct 29 04:04:38 2011] Offset between fit and detection position for source 4 = 0.125871 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.125871 pixels
  Position = (470.9, 890.2) = 12 30 13.79 11 39 53.5
  Extent = 1.1 (0.9-1.1)", rotation angle = 0
  Source counts = 81.0 +/- 9.0
  Background counts = 0.0
  Rate = 0.003 +/- 0.0003
[Sat Oct 29 04:04:38 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 04:04:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 04:04:38 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 04:04:38 2011] Source does appear to be extended
[Sat Oct 29 04:04:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 04:05:40 2011] Not overwriting source region fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4_src.reg
[Sat Oct 29 04:05:40 2011] Extracting stamp from image fullrun_ccd1_acisf10241_pi14-548_cl_sm2.00.img.gz, (423, 842) - (519, 938)
[Sat Oct 29 04:05:40 2011] Writing fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4.gif
[Sat Oct 29 04:05:47 2011] ../../acisf10241/products/events/fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4_src.evt and ../../acisf10241/products/events/fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sat Oct 29 04:05:47 2011] Size of ../../acisf10241/products/events/fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4_src.evt.gz[events] = 83 counts
[Sat Oct 29 04:05:47 2011] Mean chipx,y = (566.48, 876.41)
[Sat Oct 29 04:05:47 2011] Mean tdetx,y = (4255.59, 4673.48)
[Sat Oct 29 04:05:47 2011] chipx,y range = (549.00-589.00, 857.00-895.00)
[Sat Oct 29 04:05:47 2011] Size of ../../acisf10241/products/events/fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 41 counts
[Sat Oct 29 04:05:47 2011] ../../acisf10241/products/images/fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4_src.img and ../../acisf10241/products/images/fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Sat Oct 29 04:05:47 2011] ../../acisf10241/products/spectra/fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4_src.pi and ../../acisf10241/products/spectra/fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sat Oct 29 04:05:47 2011] Not generating rmf since there are only 80 counts
[Sat Oct 29 04:05:50 2011] ../../acisf10241/products/lightcurves/fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4_src.lc and ../../acisf10241/products/lightcurves/fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sat Oct 29 04:06:34 2011] 171.646
[Sat Oct 29 04:07:57 2011] Updating aperture counts using extracted products
[Sat Oct 29 04:07:57 2011] Error reading totcts from fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4_src.pi.gz
[Sat Oct 29 04:07:57 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 04:07:57 2011] Using photon index=1.80, rate=0.00276, arf fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4.arf
[Sat Oct 29 04:07:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 04:07:57 2011] Updating source flux to 3.7e-14
[Sat Oct 29 04:08:09 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 29 04:08:10 2011] acisf10241/analysis//spectral/fullrun_ccd1_acisf10241_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete