[Sat Oct 29 04:02:50 2011] Detection parameters:
  Position = (152.6, 224.9) = 12 30 24.51 11 42 57.6
  Extent = 2.6" x 1.4", rotation angle = 147 degrees
  Source counts = 60.1 +/- 8.7
  Background counts = 14.9
  Rate = 0.002 +/- 0.0003

[Sat Oct 29 04:02:50 2011] Off-axis axis estimate = 8.24'
[Sat Oct 29 04:03:50 2011] Using EEF radius (= 3.00 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 04:03:50 2011] Initial guess for spatial extent in simple fitting = 3.00"
[Sat Oct 29 04:03:50 2011] source mask rpix=6.1, npix_max = 174, mask sum = 182, frac = 1.045
[Sat Oct 29 04:03:50 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.00"
[Sat Oct 29 04:03:50 2011] fullrun_ccd0_acisf10241_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 29 04:03:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10241_pi14-548_cl_pass0_src3.csv
[Sat Oct 29 04:03:50 2011] fullrun_ccd0_acisf10241_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 29 04:03:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10241_pi14-548_cl_pass0_src3.csv
[Sat Oct 29 04:03:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10241_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10241_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 04:03:50 2011] fullrun_ccd0_acisf10241_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 29 04:03:50 2011] fullrun_ccd0_acisf10241_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 29 04:03:50 2011] Fit fullrun_ccd0_acisf10241_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct 29 04:04:01 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 33.990103 pixels away
[Sat Oct 29 04:04:01 2011] Spatial fit model total counts = 60.432200, observed total counts = 59.000000
[Sat Oct 29 04:04:01 2011] Offset between fit and detection position for source 3 = 3.173625 pixels
[Sat Oct 29 04:04:01 2011] Warning, changing simple spatial fit ID from 3 to 12
[Sat Oct 29 04:04:01 2011] 60.570300 total counts/ 60.570300 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.173625 pixels
  Position = (154.2, 222.2) = 12 30 24.47 11 42 56.0
  Extent = 0.8 (0.8-11.6)", rotation angle = 0
  Source counts = 0.0 +/- 7.8
  Background counts = 60.6
  Rate = 3e-20 +/- 0.0003
  Deleting source due to low Poisson probability