[Sat Oct 29 04:02:50 2011] Detection parameters:
  Position = (142.9, 100.9) = 12 30 24.83 11 41 56.5
  Extent = 2.3" x 2.0", rotation angle = 176 degrees
  Source counts = 140.1 +/- 12.6
  Background counts = 17.9
  Rate = 0.005 +/- 0.0004

[Sat Oct 29 04:02:50 2011] Off-axis axis estimate = 8.15'
[Sat Oct 29 04:03:50 2011] Using EEF radius (= 2.94 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 04:03:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 04:03:50 2011] Initial guess for spatial extent in simple fitting = 2.94"
[Sat Oct 29 04:03:50 2011] source mask rpix=6.0, npix_max = 167, mask sum = 169, frac = 1.009
[Sat Oct 29 04:03:50 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.94"
[Sat Oct 29 04:03:50 2011] fullrun_ccd0_acisf10241_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 29 04:03:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10241_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 04:03:50 2011] fullrun_ccd0_acisf10241_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 29 04:03:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10241_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 04:03:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10241_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10241_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 04:03:50 2011] fullrun_ccd0_acisf10241_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 29 04:03:50 2011] fullrun_ccd0_acisf10241_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 29 04:03:50 2011] Fit fullrun_ccd0_acisf10241_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 29 04:04:01 2011] Spatial fit model total counts = 176.032000, observed total counts = 173.000000
[Sat Oct 29 04:04:01 2011] Offset between fit and detection position for source 1 = 0.367616 pixels
[Sat Oct 29 04:04:01 2011] 175.959100 total counts/ 27.370100 bgd. counts: snr = 28.401970
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.367616 pixels
  Position = (143.3, 100.8) = 12 30 24.83 11 41 56.2
  Extent = 2.7 (2.3-3.0)", rotation angle = 0
  Source counts = 148.6 +/- 13.3
  Background counts = 27.4
  Rate = 0.005 +/- 0.0005
[Sat Oct 29 04:04:01 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 04:04:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 04:04:01 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 04:04:01 2011] Source does appear to be extended
[Sat Oct 29 04:04:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 04:04:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 04:04:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 04:04:22 2011] Initial guess for spatial extent in simple fitting = 2.70"
[Sat Oct 29 04:04:22 2011] source mask rpix=5.5, npix_max = 143, mask sum = 144, frac = 1.005
[Sat Oct 29 04:04:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.70"
[Sat Oct 29 04:04:23 2011] fullrun_ccd0_acisf10241_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 29 04:04:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10241_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 04:04:23 2011] fullrun_ccd0_acisf10241_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 29 04:04:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10241_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 04:04:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10241_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10241_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 04:04:23 2011] fullrun_ccd0_acisf10241_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 29 04:04:23 2011] fullrun_ccd0_acisf10241_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 29 04:04:23 2011] Fit fullrun_ccd0_acisf10241_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 29 04:04:33 2011] Spatial fit model total counts = 172.062000, observed total counts = 171.000000
[Sat Oct 29 04:04:33 2011] Offset between fit and detection position for source 1 = 0.077200 pixels
[Sat Oct 29 04:04:33 2011] 171.931400 total counts/ 28.921400 bgd. counts: snr = 26.592352
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.077200 pixels
  Position = (143.3, 100.7) = 12 30 24.83 11 41 56.2
  Extent = 2.6 (2.3-3.0)", rotation angle = 0
  Source counts = 143.0 +/- 13.1
  Background counts = 28.9
  Rate = 0.005 +/- 0.0004
[Sat Oct 29 04:04:33 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 04:04:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 04:04:33 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 04:04:33 2011] Source does appear to be extended
[Sat Oct 29 04:04:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 04:04:59 2011] Not overwriting source region fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 29 04:04:59 2011] Extracting stamp from image fullrun_ccd0_acisf10241_pi14-548_cl_sm2.00.img.gz, (24, 0) - (263, 220)
[Sat Oct 29 04:04:59 2011] Writing fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1.gif
[Sat Oct 29 04:05:00 2011] ../../acisf10241/products/events/fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_src.evt and ../../acisf10241/products/events/fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 29 04:05:00 2011] Size of ../../acisf10241/products/events/fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_src.evt.gz[events] = 164 counts
[Sat Oct 29 04:05:00 2011] Mean chipx,y = (128.95, 938.87)
[Sat Oct 29 04:05:00 2011] Mean tdetx,y = (3999.87, 5003.05)
[Sat Oct 29 04:05:00 2011] chipx,y range = (99.00-158.00, 910.00-964.00)
[Sat Oct 29 04:05:00 2011] Size of ../../acisf10241/products/events/fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 214 counts
[Sat Oct 29 04:05:00 2011] ../../acisf10241/products/images/fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_src.img and ../../acisf10241/products/images/fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 29 04:05:00 2011] ../../acisf10241/products/spectra/fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_src.pi and ../../acisf10241/products/spectra/fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 29 04:05:03 2011] ../../acisf10241/products/lightcurves/fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_src.lc and ../../acisf10241/products/lightcurves/fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 29 04:05:40 2011] Keeping rmf generated by specextract
[Sat Oct 29 04:05:40 2011] 170.98
[Sat Oct 29 04:07:56 2011] Updating aperture counts using extracted products
[Sat Oct 29 04:07:56 2011] Error reading totcts from fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 29 04:07:56 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 04:07:56 2011] Using photon index=1.80, rate=0.00487, arf fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1.arf
[Sat Oct 29 04:07:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 04:07:57 2011] Updating source flux to 6.7e-14
[Sat Oct 29 04:08:09 2011] Reading fit data from acisf10241/analysis//spectral/fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 29 04:08:09 2011] Spectral fit parameter nH value = 1.72937e+20
[Sat Oct 29 04:08:09 2011] Spectral fit parameter PhoIndex value = 1.57107
[Sat Oct 29 04:08:09 2011] Failed to get F(0.3-8.0) from acisf10241/analysis//spectral/fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 29 04:08:09 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 04:08:09 2011] Using Nh = 1.7e+20, photon index=1.57, rate=0.00487, arf fullrun_ccd0_acisf10241_pi14-548_pass1_cl_src1.arf
[Sat Oct 29 04:08:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 04:08:09 2011] Updating source flux to 7.1e-14