[Thu Oct 27 05:25:49 2011] Detection parameters:
  Position = (576.2, 805.2) = 1 12 45.68 49 29 46.4
  Extent = 1.8" x 1.2", rotation angle = 55 degrees
  Source counts = 310.5 +/- 18.0
  Background counts = 14.5
  Rate = 0.01 +/- 0.0007

[Thu Oct 27 05:25:50 2011] Off-axis axis estimate = 6.73'
[Thu Oct 27 05:26:38 2011] Using EEF radius (= 2.02 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 05:26:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 05:26:38 2011] Initial guess for spatial extent in simple fitting = 2.02"
[Thu Oct 27 05:26:38 2011] source mask rpix=4.1, npix_max = 85, mask sum = 81, frac = 0.952
[Thu Oct 27 05:26:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.02"
[Thu Oct 27 05:26:38 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 27 05:26:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10240_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 05:26:38 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 27 05:26:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10240_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 05:26:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10240_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10240_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 05:26:39 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 27 05:26:39 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 27 05:26:39 2011] Fit fullrun_ccd2_acisf10240_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 27 05:26:48 2011] Spatial fit model total counts = 327.312000, observed total counts = 327.000000
[Thu Oct 27 05:26:48 2011] Offset between fit and detection position for source 3 = 0.756495 pixels
[Thu Oct 27 05:26:48 2011] 327.722200 total counts/ 22.195200 bgd. counts: snr = 64.851506
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.756495 pixels
  Position = (576.6, 805.8) = 1 12 45.69 49 29 46.5
  Extent = 1.9 (1.8-2.1)", rotation angle = 0
  Source counts = 305.5 +/- 18.1
  Background counts = 22.2
  Rate = 0.01 +/- 0.0007
[Thu Oct 27 05:26:48 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 05:26:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 05:26:48 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 05:26:48 2011] Source does appear to be extended
[Thu Oct 27 05:26:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 05:27:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 05:27:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 05:27:12 2011] Initial guess for spatial extent in simple fitting = 1.92"
[Thu Oct 27 05:27:12 2011] source mask rpix=3.9, npix_max = 77, mask sum = 81, frac = 1.047
[Thu Oct 27 05:27:12 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.92"
[Thu Oct 27 05:27:13 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 27 05:27:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10240_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 05:27:13 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 27 05:27:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10240_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 05:27:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10240_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10240_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 05:27:14 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 27 05:27:14 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 27 05:27:14 2011] Fit fullrun_ccd2_acisf10240_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 27 05:27:23 2011] Spatial fit model total counts = 326.329000, observed total counts = 326.000000
[Thu Oct 27 05:27:23 2011] Offset between fit and detection position for source 3 = 0.116209 pixels
[Thu Oct 27 05:27:23 2011] 326.208600 total counts/ 24.484600 bgd. counts: snr = 60.976620
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.116209 pixels
  Position = (576.7, 805.9) = 1 12 45.68 49 29 46.5
  Extent = 1.9 (1.7-2.1)", rotation angle = 0
  Source counts = 301.7 +/- 18.1
  Background counts = 24.5
  Rate = 0.01 +/- 0.0007
[Thu Oct 27 05:27:23 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 05:27:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 05:27:23 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 05:27:23 2011] Source does appear to be extended
[Thu Oct 27 05:27:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 05:29:13 2011] Not overwriting source region fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_src.reg
[Thu Oct 27 05:29:13 2011] Extracting stamp from image fullrun_ccd2_acisf10240_pi14-548_cl_sm2.00.img.gz, (490, 720) - (663, 892)
[Thu Oct 27 05:29:13 2011] Writing fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3.gif
[Thu Oct 27 05:29:15 2011] ../../acisf10240/products/events/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_src.evt and ../../acisf10240/products/events/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Oct 27 05:29:15 2011] Size of ../../acisf10240/products/events/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_src.evt.gz[events] = 325 counts
[Thu Oct 27 05:29:15 2011] Mean chipx,y = (657.27, 465.52)
[Thu Oct 27 05:29:15 2011] Mean tdetx,y = (3526.52, 3428.73)
[Thu Oct 27 05:29:15 2011] chipx,y range = (634.00-684.00, 438.00-492.00)
[Thu Oct 27 05:29:15 2011] Size of ../../acisf10240/products/events/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 84 counts
[Thu Oct 27 05:29:15 2011] ../../acisf10240/products/images/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_src.img and ../../acisf10240/products/images/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Oct 27 05:29:15 2011] ../../acisf10240/products/spectra/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_src.pi and ../../acisf10240/products/spectra/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Oct 27 05:29:18 2011] ../../acisf10240/products/lightcurves/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_src.lc and ../../acisf10240/products/lightcurves/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Oct 27 05:30:29 2011] Keeping rmf generated by specextract
[Thu Oct 27 05:30:29 2011] 167.287
[Thu Oct 27 05:31:38 2011] Updating aperture counts using extracted products
[Thu Oct 27 05:31:38 2011] Error reading totcts from fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Oct 27 05:31:38 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 05:31:38 2011] Using photon index=1.80, rate=0.0118, arf fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3.arf
[Thu Oct 27 05:31:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 05:31:39 2011] Updating source flux to 1.6e-13
[Thu Oct 27 05:31:49 2011] Reading fit data from acisf10240/analysis//spectral/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_pl.csv
[Thu Oct 27 05:31:49 2011] Spectral fit parameter nH value = 8.36513e+21
[Thu Oct 27 05:31:49 2011] Spectral fit parameter PhoIndex value = 9.21151
[Thu Oct 27 05:31:49 2011] Failed to get F(0.3-8.0) from acisf10240/analysis//spectral/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Oct 27 05:31:49 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 05:31:49 2011] Using Nh = 8.4e+21, photon index=9.21, rate=0.0118, arf fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src3.arf
[Thu Oct 27 05:31:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 05:31:49 2011] Updating source flux to 1.4e-13