[Thu Oct 27 05:25:49 2011] Detection parameters:
  Position = (862.0, 913.0) = 1 12 31.26 49 30 39.7
  Extent = 0.6" x 0.5", rotation angle = 14 degrees
  Source counts = 11.5 +/- 3.5
  Background counts = 0.5
  Rate = 0.0004 +/- 0.0001

[Thu Oct 27 05:25:50 2011] Off-axis axis estimate = 4.80'
[Thu Oct 27 05:26:38 2011] Using EEF radius (= 1.10 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 05:26:38 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Thu Oct 27 05:26:38 2011] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.201
[Thu Oct 27 05:26:38 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 1.10"
[Thu Oct 27 05:26:39 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass0_src12.ximg exists
[Thu Oct 27 05:26:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10240_pi14-548_cl_pass0_src12.csv
[Thu Oct 27 05:26:39 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass0_src12_1.ximg exists
[Thu Oct 27 05:26:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10240_pi14-548_cl_pass0_src12.csv
[Thu Oct 27 05:26:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10240_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10240_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 05:26:39 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Thu Oct 27 05:26:39 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Oct 27 05:26:39 2011] Fit fullrun_ccd2_acisf10240_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Oct 27 05:26:48 2011] Spatial fit model total counts = 11.943500, observed total counts = 14.000000
[Thu Oct 27 05:26:48 2011] Offset between fit and detection position for source 11 = 0.959782 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.959782 pixels
  Position = (862.7, 913.7) = 1 12 31.25 49 30 39.8
  Extent = 0.8" x 0.4", rotation angle = 359
  Source counts = 10.9 +/- 3.3
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Thu Oct 27 05:26:48 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 05:26:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 05:26:48 2011] Assessing source extent using major
[Thu Oct 27 05:26:48 2011] Source does appear to be extended
[Thu Oct 27 05:26:48 2011] Computing asymmetry using major and minor axis, asym = 2.13
[Thu Oct 27 05:26:48 2011] Source is asymmetric
[Thu Oct 27 05:27:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 05:27:12 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Thu Oct 27 05:27:12 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.754
[Thu Oct 27 05:27:12 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.60"
[Thu Oct 27 05:27:14 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass1_src12.ximg exists
[Thu Oct 27 05:27:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10240_pi14-548_cl_pass1_src12.csv
[Thu Oct 27 05:27:14 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass1_src12_1.ximg exists
[Thu Oct 27 05:27:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10240_pi14-548_cl_pass1_src12.csv
[Thu Oct 27 05:27:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10240_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10240_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 05:27:14 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Thu Oct 27 05:27:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10240_pi14-548_cl_pass1_tfrozen_src12.csv
[Thu Oct 27 05:27:14 2011] fullrun_ccd2_acisf10240_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Oct 27 05:27:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10240_pi14-548_cl_pass1_tfrozen_src12.csv
[Thu Oct 27 05:27:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10240_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10240_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 05:27:23 2011] Spatial fit model total counts = 12.857700, observed total counts = 14.000000
[Thu Oct 27 05:27:23 2011] Offset between fit and detection position for source 11 = 0.128863 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.128863 pixels
  Position = (862.6, 913.6) = 1 12 31.25 49 30 39.8
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 12.1 +/- 3.5
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Thu Oct 27 05:27:23 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 05:27:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 05:27:23 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 05:27:23 2011] Source does appear to be extended
[Thu Oct 27 05:27:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 05:29:13 2011] Not overwriting source region fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11_src.reg
[Thu Oct 27 05:29:13 2011] Extracting stamp from image fullrun_ccd2_acisf10240_pi14-548_cl_sm2.00.img.gz, (830, 881) - (895, 946)
[Thu Oct 27 05:29:13 2011] Writing fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11.gif
[Thu Oct 27 05:29:49 2011] ../../acisf10240/products/events/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11_src.evt and ../../acisf10240/products/events/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Thu Oct 27 05:29:49 2011] Size of ../../acisf10240/products/events/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11_src.evt.gz[events] = 12 counts
[Thu Oct 27 05:29:49 2011] Mean chipx,y = (593.75, 757.58)
[Thu Oct 27 05:29:49 2011] Mean tdetx,y = (3818.58, 3492.25)
[Thu Oct 27 05:29:49 2011] chipx,y range = (574.00-607.00, 746.00-776.00)
[Thu Oct 27 05:29:49 2011] Size of ../../acisf10240/products/events/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 10 counts
[Thu Oct 27 05:29:49 2011] ../../acisf10240/products/images/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11_src.img and ../../acisf10240/products/images/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Thu Oct 27 05:29:49 2011] ../../acisf10240/products/spectra/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11_src.pi and ../../acisf10240/products/spectra/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Thu Oct 27 05:29:49 2011] Not generating rmf since there are only 12 counts
[Thu Oct 27 05:29:53 2011] ../../acisf10240/products/lightcurves/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11_src.lc and ../../acisf10240/products/lightcurves/fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Thu Oct 27 05:30:29 2011] 173.679
[Thu Oct 27 05:31:38 2011] Updating aperture counts using extracted products
[Thu Oct 27 05:31:38 2011] Error reading totcts from fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11_src.pi.gz
[Thu Oct 27 05:31:39 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 05:31:39 2011] Using photon index=1.80, rate=0.000474, arf fullrun_ccd2_acisf10240_pi14-548_pass1_cl_src11.arf
[Thu Oct 27 05:31:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 05:31:39 2011] Updating source flux to 6.1e-15
[Thu Oct 27 05:31:44 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting