[Fri Oct 28 14:44:43 2011] Detection parameters:
  Position = (280.8, 355.8) = 7 49 1.26 55 55 44.5
  Extent = 0.7" x 0.5", rotation angle = 53 degrees
  Source counts = 10.4 +/- 3.3
  Background counts = 0.6
  Rate = 0.0004 +/- 0.0001

[Fri Oct 28 14:44:43 2011] Off-axis axis estimate = 3.99'
[Fri Oct 28 14:45:16 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 14:45:16 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Fri Oct 28 14:45:16 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Fri Oct 28 14:45:16 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.83"
[Fri Oct 28 14:45:16 2011] fullrun_ccd0_acisf10237_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 28 14:45:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10237_pi14-548_cl_pass0_src2.csv
[Fri Oct 28 14:45:16 2011] fullrun_ccd0_acisf10237_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 28 14:45:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10237_pi14-548_cl_pass0_src2.csv
[Fri Oct 28 14:45:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10237_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10237_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 14:45:16 2011] fullrun_ccd0_acisf10237_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 28 14:45:16 2011] fullrun_ccd0_acisf10237_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 28 14:45:16 2011] Fit fullrun_ccd0_acisf10237_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 28 14:45:21 2011] Spatial fit model total counts = 13.559300, observed total counts = 14.000000
[Fri Oct 28 14:45:21 2011] Offset between fit and detection position for source 3 = 0.346291 pixels
[Fri Oct 28 14:45:21 2011] 13.565210 total counts/ 0.069410 bgd. counts: snr = 51.225592
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.346291 pixels
  Position = (281.1, 355.8) = 7 49 1.27 55 55 44.2
  Extent = 0.9 (0.4-1.4)", rotation angle = 0
  Source counts = 13.5 +/- 3.7
  Background counts = 0.1
  Rate = 0.0006 +/- 0.0002
[Fri Oct 28 14:45:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 14:45:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 14:45:21 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 14:45:21 2011] Source does appear to be extended
[Fri Oct 28 14:45:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 14:45:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 14:45:34 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Fri Oct 28 14:45:34 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.900
[Fri Oct 28 14:45:34 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.91"
[Fri Oct 28 14:45:34 2011] fullrun_ccd0_acisf10237_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 28 14:45:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10237_pi14-548_cl_pass1_src2.csv
[Fri Oct 28 14:45:34 2011] fullrun_ccd0_acisf10237_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 28 14:45:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10237_pi14-548_cl_pass1_src2.csv
[Fri Oct 28 14:45:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10237_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10237_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 14:45:34 2011] fullrun_ccd0_acisf10237_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 28 14:45:34 2011] fullrun_ccd0_acisf10237_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 28 14:45:34 2011] Fit fullrun_ccd0_acisf10237_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 28 14:45:41 2011] Spatial fit model total counts = 13.469500, observed total counts = 14.000000
[Fri Oct 28 14:45:41 2011] Offset between fit and detection position for source 3 = 0.073908 pixels
[Fri Oct 28 14:45:41 2011] 13.376700 total counts/ 0.954300 bgd. counts: snr = 12.716367
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.073908 pixels
  Position = (281.1, 355.8) = 7 49 1.27 55 55 44.3
  Extent = 0.9 (0.6-1.4)", rotation angle = 0
  Source counts = 12.4 +/- 3.7
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0002
[Fri Oct 28 14:45:41 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 14:45:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 14:45:41 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 14:45:41 2011] Source does appear to be extended
[Fri Oct 28 14:45:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 14:45:57 2011] Not overwriting source region fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 28 14:45:57 2011] Extracting stamp from image fullrun_ccd0_acisf10237_pi14-548_cl_sm2.00.img.gz, (241, 316) - (321, 396)
[Fri Oct 28 14:45:57 2011] Writing fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3.gif
[Fri Oct 28 14:46:04 2011] ../../acisf10237/products/events/fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3_src.evt and ../../acisf10237/products/events/fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 28 14:46:04 2011] Size of ../../acisf10237/products/events/fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3_src.evt.gz[events] = 14 counts
[Fri Oct 28 14:46:04 2011] Mean chipx,y = (693.86, 811.29)
[Fri Oct 28 14:46:04 2011] Mean tdetx,y = (3872.29, 4438.14)
[Fri Oct 28 14:46:04 2011] chipx,y range = (678.00-712.00, 790.00-827.00)
[Fri Oct 28 14:46:04 2011] Size of ../../acisf10237/products/events/fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 20 counts
[Fri Oct 28 14:46:04 2011] ../../acisf10237/products/images/fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3_src.img and ../../acisf10237/products/images/fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 28 14:46:04 2011] ../../acisf10237/products/spectra/fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3_src.pi and ../../acisf10237/products/spectra/fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 28 14:46:04 2011] Not generating rmf since there are only 12 counts
[Fri Oct 28 14:46:08 2011] ../../acisf10237/products/lightcurves/fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3_src.lc and ../../acisf10237/products/lightcurves/fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 28 14:46:17 2011] 192.424
[Fri Oct 28 14:47:17 2011] Updating aperture counts using extracted products
[Fri Oct 28 14:47:17 2011] Error reading totcts from fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 28 14:47:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 14:47:17 2011] Using photon index=1.80, rate=0.000516, arf fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3.arf
[Fri Oct 28 14:47:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 14:47:17 2011] Updating source flux to 6.1e-15
[Fri Oct 28 14:47:19 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 28 14:47:20 2011] acisf10237/analysis//spectral/fullrun_ccd0_acisf10237_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete