[Fri Oct  7 21:11:36 2011] Detection parameters:
  Position = (1075.2, 860.4) = 22 50 5.77 11 39 42.9
  Extent = 0.9" x 0.5", rotation angle = 94 degrees
  Source counts = 18.2 +/- 4.5
  Background counts = 1.8
  Rate = 0.0005 +/- 0.0001

[Fri Oct  7 21:11:37 2011] Off-axis axis estimate = 4.42'
[Fri Oct  7 21:12:56 2011] Using EEF radius (= 0.96 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 21:12:56 2011] Initial guess for spatial extent in simple fitting = 0.96"
[Fri Oct  7 21:12:56 2011] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.784
[Fri Oct  7 21:12:56 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.96"
[Fri Oct  7 21:12:58 2011] fullrun_ccd1_acisf10233_pi14-548_cl_pass0_src12.ximg exists
[Fri Oct  7 21:12:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10233_pi14-548_cl_pass0_src12.csv
[Fri Oct  7 21:12:58 2011] fullrun_ccd1_acisf10233_pi14-548_cl_pass0_src12_1.ximg exists
[Fri Oct  7 21:12:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10233_pi14-548_cl_pass0_src12.csv
[Fri Oct  7 21:12:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10233_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10233_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 21:12:59 2011] fullrun_ccd1_acisf10233_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Fri Oct  7 21:12:59 2011] fullrun_ccd1_acisf10233_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Oct  7 21:12:59 2011] Fit fullrun_ccd1_acisf10233_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Oct  7 21:13:15 2011] Spatial fit model total counts = 24.812800, observed total counts = 30.000000
[Fri Oct  7 21:13:15 2011] Offset between fit and detection position for source 20 = 1.017038 pixels
[Fri Oct  7 21:13:15 2011] 24.638113 total counts/ 0.499313 bgd. counts: snr = 34.160895
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.017038 pixels
  Position = (1075.9, 861.2) = 22 50 5.77 11 39 43.1
  Extent = 0.9 (0.7-1.4)" x 0.4 (0.3-0.7)", rotation angle = 66 (51-81) degrees
  Source counts = 24.1 +/- 5.0
  Background counts = 0.5
  Rate = 0.0006 +/- 0.0001
[Fri Oct  7 21:13:15 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 21:13:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 21:13:15 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 21:13:15 2011] Source does appear to be extended
[Fri Oct  7 21:13:15 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Fri Oct  7 21:13:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 21:13:45 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Fri Oct  7 21:13:45 2011] source mask rpix=1.4, npix_max = 14, mask sum = 11, frac = 0.756
[Fri Oct  7 21:13:45 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.69"
[Fri Oct  7 21:13:46 2011] fullrun_ccd1_acisf10233_pi14-548_cl_pass1_src12.ximg exists
[Fri Oct  7 21:13:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10233_pi14-548_cl_pass1_src12.csv
[Fri Oct  7 21:13:46 2011] fullrun_ccd1_acisf10233_pi14-548_cl_pass1_src12_1.ximg exists
[Fri Oct  7 21:13:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10233_pi14-548_cl_pass1_src12.csv
[Fri Oct  7 21:13:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10233_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10233_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 21:13:46 2011] fullrun_ccd1_acisf10233_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Fri Oct  7 21:13:46 2011] fullrun_ccd1_acisf10233_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Oct  7 21:13:46 2011] Fit fullrun_ccd1_acisf10233_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Oct  7 21:14:01 2011] Spatial fit model total counts = 28.970700, observed total counts = 30.000000
[Fri Oct  7 21:14:01 2011] Offset between fit and detection position for source 20 = 0.049125 pixels
[Fri Oct  7 21:14:01 2011] 28.649271 total counts/ 0.509171 bgd. counts: snr = 39.436086
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.049125 pixels
  Position = (1075.9, 861.2) = 22 50 5.76 11 39 43.1
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 28.1 +/- 5.4
  Background counts = 0.5
  Rate = 0.0007 +/- 0.0001
[Fri Oct  7 21:14:01 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 21:14:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 21:14:01 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 21:14:01 2011] Source does appear to be extended
[Fri Oct  7 21:14:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 21:15:33 2011] Not overwriting source region fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20_src.reg
[Fri Oct  7 21:15:33 2011] Extracting stamp from image fullrun_ccd1_acisf10233_pi14-548_cl_sm2.00.img.gz, (1042, 827) - (1110, 896)
[Fri Oct  7 21:15:33 2011] Writing fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20.gif
[Fri Oct  7 21:16:11 2011] ../../acisf10233/products/events/fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20_src.evt and ../../acisf10233/products/events/fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Fri Oct  7 21:16:11 2011] Size of ../../acisf10233/products/events/fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20_src.evt.gz[events] = 29 counts
[Fri Oct  7 21:16:11 2011] Mean chipx,y = (434.41, 913.10)
[Fri Oct  7 21:16:11 2011] Mean tdetx,y = (4218.90, 4541.41)
[Fri Oct  7 21:16:11 2011] chipx,y range = (418.00-454.00, 896.00-931.00)
[Fri Oct  7 21:16:11 2011] Size of ../../acisf10233/products/events/fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 15 counts
[Fri Oct  7 21:16:11 2011] ../../acisf10233/products/images/fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20_src.img and ../../acisf10233/products/images/fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Fri Oct  7 21:16:11 2011] ../../acisf10233/products/spectra/fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20_src.pi and ../../acisf10233/products/spectra/fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Fri Oct  7 21:16:11 2011] Not generating rmf since there are only 28 counts
[Fri Oct  7 21:16:14 2011] ../../acisf10233/products/lightcurves/fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20_src.lc and ../../acisf10233/products/lightcurves/fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Fri Oct  7 21:16:39 2011] 185.63
[Fri Oct  7 21:19:17 2011] Updating aperture counts using extracted products
[Fri Oct  7 21:19:17 2011] Error reading totcts from fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20_src.pi.gz
[Fri Oct  7 21:19:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 21:19:17 2011] Using photon index=1.80, rate=0.000715, arf fullrun_ccd1_acisf10233_pi14-548_pass1_cl_src20.arf
[Fri Oct  7 21:19:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 21:19:17 2011] Updating source flux to 8.8e-15
[Fri Oct  7 21:19:25 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting