[Sun Oct 30 22:34:49 2011] Detection parameters:
  Position = (810.2, 1103.0) = 18 38 48.29 17 14 38.7
  Extent = 0.7" x 0.5", rotation angle = 37 degrees
  Source counts = 14.2 +/- 3.9
  Background counts = 0.8
  Rate = 0.0005 +/- 0.0001

[Sun Oct 30 22:34:50 2011] Off-axis axis estimate = 5.67'
[Sun Oct 30 22:35:38 2011] Using EEF radius (= 1.47 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 22:35:38 2011] Initial guess for spatial extent in simple fitting = 1.47"
[Sun Oct 30 22:35:38 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.004
[Sun Oct 30 22:35:38 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.47"
[Sun Oct 30 22:35:38 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass0_src11.ximg exists
[Sun Oct 30 22:35:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10232_pi14-548_cl_pass0_src11.csv
[Sun Oct 30 22:35:39 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass0_src11_1.ximg exists
[Sun Oct 30 22:35:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10232_pi14-548_cl_pass0_src11.csv
[Sun Oct 30 22:35:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10232_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10232_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 22:35:39 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sun Oct 30 22:35:39 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Oct 30 22:35:39 2011] Fit fullrun_ccd2_acisf10232_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Oct 30 22:35:48 2011] Spatial fit model total counts = 19.127700, observed total counts = 20.000000
[Sun Oct 30 22:35:48 2011] Offset between fit and detection position for source 6 = 0.739299 pixels
[Sun Oct 30 22:35:48 2011] 18.453330 total counts/ 3.726830 bgd. counts: snr = 7.628335
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.739299 pixels
  Position = (810.8, 1103.5) = 18 38 48.29 17 14 38.7
  Extent = 0.8 (0.4-1.2)", rotation angle = 0
  Source counts = 14.7 +/- 4.3
  Background counts = 3.7
  Rate = 0.0005 +/- 0.0001
[Sun Oct 30 22:35:48 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 22:35:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 22:35:48 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 22:35:48 2011] Source does appear to be extended
[Sun Oct 30 22:35:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 22:36:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 22:36:07 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Sun Oct 30 22:36:07 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.124
[Sun Oct 30 22:36:07 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.79"
[Sun Oct 30 22:36:08 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass1_src11.ximg exists
[Sun Oct 30 22:36:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10232_pi14-548_cl_pass1_src11.csv
[Sun Oct 30 22:36:08 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass1_src11_1.ximg exists
[Sun Oct 30 22:36:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10232_pi14-548_cl_pass1_src11.csv
[Sun Oct 30 22:36:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10232_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10232_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 22:36:08 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sun Oct 30 22:36:08 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Oct 30 22:36:08 2011] Fit fullrun_ccd2_acisf10232_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Oct 30 22:36:18 2011] Spatial fit model total counts = 19.023000, observed total counts = 19.000000
[Sun Oct 30 22:36:18 2011] Offset between fit and detection position for source 6 = 0.487958 pixels
[Sun Oct 30 22:36:18 2011] 18.739790 total counts/ 6.181890 bgd. counts: snr = 5.050756
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.487958 pixels
  Position = (810.4, 1103.2) = 18 38 48.30 17 14 38.5
  Extent = 0.5 (0.3-1.0)", rotation angle = 0
  Source counts = 12.6 +/- 4.3
  Background counts = 6.2
  Rate = 0.0004 +/- 0.0001
[Sun Oct 30 22:36:18 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 22:36:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 22:36:18 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 22:36:18 2011] Source does appear to be extended
[Sun Oct 30 22:36:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 22:37:40 2011] Not overwriting source region fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6_src.reg
[Sun Oct 30 22:37:40 2011] Extracting stamp from image fullrun_ccd2_acisf10232_pi14-548_cl_sm2.00.img.gz, (785, 1078) - (835, 1128)
[Sun Oct 30 22:37:40 2011] Writing fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6.gif
[Sun Oct 30 22:38:10 2011] ../../acisf10232/products/events/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6_src.evt and ../../acisf10232/products/events/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sun Oct 30 22:38:10 2011] Size of ../../acisf10232/products/events/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6_src.evt.gz[events] = 14 counts
[Sun Oct 30 22:38:10 2011] Mean chipx,y = (737.93, 845.36)
[Sun Oct 30 22:38:10 2011] Mean tdetx,y = (3906.36, 3348.00)
[Sun Oct 30 22:38:10 2011] chipx,y range = (721.00-757.00, 834.00-867.00)
[Sun Oct 30 22:38:10 2011] Size of ../../acisf10232/products/events/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 11 counts
[Sun Oct 30 22:38:10 2011] ../../acisf10232/products/images/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6_src.img and ../../acisf10232/products/images/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Sun Oct 30 22:38:10 2011] ../../acisf10232/products/spectra/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6_src.pi and ../../acisf10232/products/spectra/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sun Oct 30 22:38:10 2011] Not generating rmf since there are only 12 counts
[Sun Oct 30 22:38:13 2011] ../../acisf10232/products/lightcurves/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6_src.lc and ../../acisf10232/products/lightcurves/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sun Oct 30 22:38:31 2011] 176.156
[Sun Oct 30 22:39:14 2011] Updating aperture counts using extracted products
[Sun Oct 30 22:39:14 2011] Error reading totcts from fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6_src.pi.gz
[Sun Oct 30 22:39:14 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 22:39:14 2011] Using photon index=1.80, rate=0.000429, arf fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src6.arf
[Sun Oct 30 22:39:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 22:39:14 2011] Updating source flux to 5.4e-15
[Sun Oct 30 22:39:20 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting