[Sun Oct 30 22:34:49 2011] Detection parameters:
  Position = (686.3, 488.3) = 18 38 52.53 17 9 36.2
  Extent = 1.6" x 1.2", rotation angle = 80 degrees
  Source counts = 298.0 +/- 17.6
  Background counts = 11.0
  Rate = 0.01 +/- 0.0006

[Sun Oct 30 22:34:50 2011] Off-axis axis estimate = 6.17'
[Sun Oct 30 22:35:38 2011] Using EEF radius (= 1.72 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 22:35:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 22:35:38 2011] Initial guess for spatial extent in simple fitting = 1.72"
[Sun Oct 30 22:35:38 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.005
[Sun Oct 30 22:35:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.72"
[Sun Oct 30 22:35:38 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 30 22:35:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10232_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 22:35:38 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 30 22:35:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10232_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 22:35:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10232_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10232_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 22:35:39 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 30 22:35:39 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 30 22:35:39 2011] Fit fullrun_ccd2_acisf10232_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 30 22:35:48 2011] Spatial fit model total counts = 306.961000, observed total counts = 307.000000
[Sun Oct 30 22:35:48 2011] Offset between fit and detection position for source 18 = 0.484567 pixels
[Sun Oct 30 22:35:48 2011] 307.937800 total counts/ 22.972800 bgd. counts: snr = 59.454476
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.484567 pixels
  Position = (686.6, 488.7) = 18 38 52.54 17 9 36.1
  Extent = 1.6 (1.5-1.8)", rotation angle = 0
  Source counts = 285.0 +/- 17.5
  Background counts = 23.0
  Rate = 0.01 +/- 0.0006
[Sun Oct 30 22:35:48 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 22:35:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 22:35:48 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 22:35:48 2011] Source does appear to be extended
[Sun Oct 30 22:35:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 22:36:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 22:36:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 22:36:07 2011] Initial guess for spatial extent in simple fitting = 1.61"
[Sun Oct 30 22:36:07 2011] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.861
[Sun Oct 30 22:36:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.61"
[Sun Oct 30 22:36:08 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 30 22:36:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10232_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 22:36:08 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 30 22:36:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10232_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 22:36:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10232_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10232_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 22:36:08 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 30 22:36:08 2011] fullrun_ccd2_acisf10232_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 30 22:36:08 2011] Fit fullrun_ccd2_acisf10232_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 30 22:36:18 2011] Spatial fit model total counts = 307.298000, observed total counts = 305.000000
[Sun Oct 30 22:36:18 2011] Offset between fit and detection position for source 18 = 0.102875 pixels
[Sun Oct 30 22:36:18 2011] 308.435400 total counts/ 29.958400 bgd. counts: snr = 50.877999
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.102875 pixels
  Position = (686.6, 488.7) = 18 38 52.54 17 9 36.2
  Extent = 1.5 (1.4-1.7)", rotation angle = 0
  Source counts = 278.5 +/- 17.6
  Background counts = 30.0
  Rate = 0.01 +/- 0.0006
[Sun Oct 30 22:36:18 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 22:36:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 22:36:18 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 22:36:18 2011] Source does appear to be extended
[Sun Oct 30 22:36:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 22:37:40 2011] Not overwriting source region fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_src.reg
[Sun Oct 30 22:37:40 2011] Extracting stamp from image fullrun_ccd2_acisf10232_pi14-548_cl_sm2.00.img.gz, (616, 418) - (757, 559)
[Sun Oct 30 22:37:40 2011] Writing fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18.gif
[Sun Oct 30 22:37:41 2011] ../../acisf10232/products/events/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_src.evt and ../../acisf10232/products/events/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sun Oct 30 22:37:41 2011] Size of ../../acisf10232/products/events/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_src.evt.gz[events] = 302 counts
[Sun Oct 30 22:37:41 2011] Mean chipx,y = (357.17, 350.40)
[Sun Oct 30 22:37:41 2011] Mean tdetx,y = (3411.40, 3728.83)
[Sun Oct 30 22:37:41 2011] chipx,y range = (336.00-381.00, 326.00-373.00)
[Sun Oct 30 22:37:41 2011] Size of ../../acisf10232/products/events/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 43 counts
[Sun Oct 30 22:37:41 2011] ../../acisf10232/products/images/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_src.img and ../../acisf10232/products/images/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Sun Oct 30 22:37:41 2011] ../../acisf10232/products/spectra/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_src.pi and ../../acisf10232/products/spectra/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sun Oct 30 22:37:44 2011] ../../acisf10232/products/lightcurves/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_src.lc and ../../acisf10232/products/lightcurves/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sun Oct 30 22:38:30 2011] Keeping rmf generated by specextract
[Sun Oct 30 22:38:30 2011] 176.848
[Sun Oct 30 22:39:13 2011] Updating aperture counts using extracted products
[Sun Oct 30 22:39:13 2011] Error reading totcts from fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_src.pi.gz
[Sun Oct 30 22:39:14 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 22:39:14 2011] Using photon index=1.80, rate=0.00951, arf fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18.arf
[Sun Oct 30 22:39:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 22:39:14 2011] Updating source flux to 1.2e-13
[Sun Oct 30 22:39:24 2011] Reading fit data from acisf10232/analysis//spectral/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_pl.csv
[Sun Oct 30 22:39:24 2011] Spectral fit parameter nH value = 1.43136e+21
[Sun Oct 30 22:39:24 2011] Spectral fit parameter PhoIndex value = 2.035
[Sun Oct 30 22:39:24 2011] Failed to get F(0.3-8.0) from acisf10232/analysis//spectral/fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18_pl.csv, possibly due to different flux energy range selected
[Sun Oct 30 22:39:24 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 22:39:24 2011] Using Nh = 1.4e+21, photon index=2.04, rate=0.00951, arf fullrun_ccd2_acisf10232_pi14-548_pass1_cl_src18.arf
[Sun Oct 30 22:39:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 22:39:24 2011] Updating source flux to 1.1e-13