[Sun Oct 16 07:55:23 2011] Detection parameters:
  Position = (1069.2, 382.2) = 16 15 30.51 19 22 27.8
  Extent = 0.7" x 0.5", rotation angle = 1 degrees
  Source counts = 60.2 +/- 8.0
  Background counts = 3.8
  Rate = 0.001 +/- 0.0002

[Sun Oct 16 07:55:23 2011] Off-axis axis estimate = 5.37'
[Sun Oct 16 07:56:25 2011] Using EEF radius (= 1.34 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:56:25 2011] Initial guess for spatial extent in simple fitting = 1.34"
[Sun Oct 16 07:56:25 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.871
[Sun Oct 16 07:56:25 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 1.34"
[Sun Oct 16 07:56:27 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src7.ximg exists
[Sun Oct 16 07:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src7.csv
[Sun Oct 16 07:56:27 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src7_1.ximg exists
[Sun Oct 16 07:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src7.csv
[Sun Oct 16 07:56:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 07:56:28 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sun Oct 16 07:56:28 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Oct 16 07:56:28 2011] Fit fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Oct 16 07:56:46 2011] Spatial fit model total counts = 60.533100, observed total counts = 63.000000
[Sun Oct 16 07:56:46 2011] Offset between fit and detection position for source 46 = 0.445788 pixels
[Sun Oct 16 07:56:46 2011] 62.956000 total counts/ 11.534800 bgd. counts: snr = 15.140394
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.445788 pixels
  Position = (1069.0, 382.6) = 16 15 30.54 19 22 27.7
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source counts = 51.4 +/- 7.9
  Background counts = 11.5
  Rate = 0.001 +/- 0.0002
[Sun Oct 16 07:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:56:46 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 07:56:46 2011] Source does appear to be extended
[Sun Oct 16 07:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 07:57:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:57:11 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Sun Oct 16 07:57:11 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.135
[Sun Oct 16 07:57:11 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 1.02"
[Sun Oct 16 07:57:12 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src7.ximg exists
[Sun Oct 16 07:57:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src7.csv
[Sun Oct 16 07:57:12 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src7_1.ximg exists
[Sun Oct 16 07:57:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src7.csv
[Sun Oct 16 07:57:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 07:57:12 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sun Oct 16 07:57:12 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Oct 16 07:57:12 2011] Fit fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Oct 16 07:57:30 2011] Spatial fit model total counts = 60.086900, observed total counts = 63.000000
[Sun Oct 16 07:57:30 2011] Offset between fit and detection position for source 46 = 0.060908 pixels
[Sun Oct 16 07:57:30 2011] 62.503350 total counts/ 9.901850 bgd. counts: snr = 16.716292
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.060908 pixels
  Position = (1069.0, 382.5) = 16 15 30.54 19 22 27.7
  Extent = 1.1 (0.8-1.2)", rotation angle = 0
  Source counts = 52.6 +/- 7.9
  Background counts = 9.9
  Rate = 0.001 +/- 0.0002
[Sun Oct 16 07:57:30 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:57:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:57:30 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 07:57:30 2011] Source does appear to be extended
[Sun Oct 16 07:57:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 08:01:23 2011] Not overwriting source region fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46_src.reg
[Sun Oct 16 08:01:23 2011] Extracting stamp from image fullrun_ccd3_acisf10230_pi14-548_cl_sm2.00.img.gz, (1020, 334) - (1118, 431)
[Sun Oct 16 08:01:23 2011] Writing fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46.gif
[Sun Oct 16 08:01:44 2011] ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46_src.evt and ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46_bgd.evt exist, delete to re-create
[Sun Oct 16 08:01:44 2011] Size of ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46_src.evt.gz[events] = 64 counts
[Sun Oct 16 08:01:44 2011] Mean chipx,y = (300.80, 1008.12)
[Sun Oct 16 08:01:44 2011] Mean tdetx,y = (4123.88, 3361.80)
[Sun Oct 16 08:01:44 2011] chipx,y range = (285.00-318.00, 989.00-1022.00)
[Sun Oct 16 08:01:44 2011] Size of ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46_bgd.evt.gz[events] = 31 counts
[Sun Oct 16 08:01:45 2011] ../../acisf10230/products/images/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46_src.img and ../../acisf10230/products/images/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46_bgd.img exist, delete to re-create
[Sun Oct 16 08:01:45 2011] ../../acisf10230/products/spectra/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46_src.pi and ../../acisf10230/products/spectra/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46_bgd.pi exist, delete to re-create
[Sun Oct 16 08:01:45 2011] Not generating rmf since there are only 52 counts
[Sun Oct 16 08:01:48 2011] ../../acisf10230/products/lightcurves/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46_src.lc and ../../acisf10230/products/lightcurves/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46_bgd.lc exist, delete to re-create
[Sun Oct 16 08:03:16 2011] 137.918
[Sun Oct 16 08:03:32 2011] Updating aperture counts using extracted products
[Sun Oct 16 08:03:32 2011] Error reading totcts from fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46_src.pi.gz
[Sun Oct 16 08:03:32 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 08:03:32 2011] Using photon index=1.80, rate=0.00118, arf fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46.arf
[Sun Oct 16 08:03:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 08:03:32 2011] Updating source flux to 2e-14
[Sun Oct 16 08:03:45 2011] Source 46 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 16 08:03:46 2011] acisf10230/analysis//spectral/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete