[Sun Oct 16 07:55:22 2011] Detection parameters:
  Position = (361.8, 464.7) = 16 15 55.11 19 23 8.3
  Extent = 1.0" x 0.6", rotation angle = 124 degrees
  Source counts = 24.8 +/- 5.5
  Background counts = 5.2
  Rate = 0.0006 +/- 0.0001

[Sun Oct 16 07:55:23 2011] Off-axis axis estimate = 7.19'
[Sun Oct 16 07:56:25 2011] Using EEF radius (= 2.30 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:56:25 2011] Initial guess for spatial extent in simple fitting = 2.30"
[Sun Oct 16 07:56:25 2011] source mask rpix=4.7, npix_max = 106, mask sum = 100, frac = 0.937
[Sun Oct 16 07:56:25 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 2.30"
[Sun Oct 16 07:56:27 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src16.ximg exists
[Sun Oct 16 07:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src16.csv
[Sun Oct 16 07:56:27 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src16_1.ximg exists
[Sun Oct 16 07:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src16.csv
[Sun Oct 16 07:56:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 07:56:28 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Sun Oct 16 07:56:28 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Oct 16 07:56:28 2011] Fit fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Oct 16 07:56:46 2011] Spatial fit model total counts = 38.349800, observed total counts = 38.000000
[Sun Oct 16 07:56:46 2011] Offset between fit and detection position for source 29 = 0.220505 pixels
[Sun Oct 16 07:56:46 2011] 38.520700 total counts/ 12.727000 bgd. counts: snr = 7.230205
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.220505 pixels
  Position = (361.6, 464.7) = 16 15 55.14 19 23 8.0
  Extent = 1.4 (1.0-1.9)", rotation angle = 0
  Source counts = 25.8 +/- 6.2
  Background counts = 12.7
  Rate = 0.0006 +/- 0.0001
[Sun Oct 16 07:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:56:46 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 07:56:46 2011] Source does appear to be extended
[Sun Oct 16 07:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 07:57:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:57:11 2011] Initial guess for spatial extent in simple fitting = 1.43"
[Sun Oct 16 07:57:11 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.051
[Sun Oct 16 07:57:11 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 1.43"
[Sun Oct 16 07:57:12 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src16.ximg exists
[Sun Oct 16 07:57:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src16.csv
[Sun Oct 16 07:57:12 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src16_1.ximg exists
[Sun Oct 16 07:57:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src16.csv
[Sun Oct 16 07:57:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 07:57:13 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Sun Oct 16 07:57:13 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Oct 16 07:57:13 2011] Fit fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Sun Oct 16 07:57:30 2011] Spatial fit model total counts = 27.496100, observed total counts = 30.000000
[Sun Oct 16 07:57:30 2011] Offset between fit and detection position for source 29 = 0.881300 pixels
[Sun Oct 16 07:57:30 2011] 27.058200 total counts/ 0.000000 bgd. counts: snr = 1213579647866377.750000
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.881300 pixels
  Position = (362.4, 464.3) = 16 15 55.11 19 23 7.8
  Extent = 1.4 (1.0-1.8)", rotation angle = 0
  Source counts = 27.1 +/- 5.2
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sun Oct 16 07:57:30 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:57:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:57:30 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 07:57:30 2011] Source does appear to be extended
[Sun Oct 16 07:57:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 08:01:23 2011] Not overwriting source region fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29_src.reg
[Sun Oct 16 08:01:23 2011] Extracting stamp from image fullrun_ccd3_acisf10230_pi14-548_cl_sm2.00.img.gz, (298, 400) - (427, 529)
[Sun Oct 16 08:01:23 2011] Writing fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29.gif
[Sun Oct 16 08:02:13 2011] ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29_src.evt and ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Sun Oct 16 08:02:13 2011] Size of ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29_src.evt.gz[events] = 31 counts
[Sun Oct 16 08:02:13 2011] Mean chipx,y = (438.71, 304.06)
[Sun Oct 16 08:02:13 2011] Mean tdetx,y = (4827.94, 3499.71)
[Sun Oct 16 08:02:13 2011] chipx,y range = (421.00-456.00, 291.00-328.00)
[Sun Oct 16 08:02:13 2011] Size of ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 71 counts
[Sun Oct 16 08:02:13 2011] ../../acisf10230/products/images/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29_src.img and ../../acisf10230/products/images/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Sun Oct 16 08:02:13 2011] ../../acisf10230/products/spectra/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29_src.pi and ../../acisf10230/products/spectra/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Sun Oct 16 08:02:13 2011] Not generating rmf since there are only 27 counts
[Sun Oct 16 08:02:15 2011] ../../acisf10230/products/lightcurves/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29_src.lc and ../../acisf10230/products/lightcurves/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Sun Oct 16 08:03:16 2011] 174.021
[Sun Oct 16 08:03:32 2011] Updating aperture counts using extracted products
[Sun Oct 16 08:03:32 2011] Error reading totcts from fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29_src.pi.gz
[Sun Oct 16 08:03:32 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 08:03:32 2011] Using photon index=1.80, rate=0.000607, arf fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29.arf
[Sun Oct 16 08:03:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 08:03:32 2011] Updating source flux to 8.2e-15
[Sun Oct 16 08:03:45 2011] Source 29 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 16 08:03:46 2011] acisf10230/analysis//spectral/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete