[Sun Oct 16 07:55:22 2011] Detection parameters:
  Position = (615.2, 454.0) = 16 15 46.30 19 23 3.0
  Extent = 1.1" x 0.7", rotation angle = 3 degrees
  Source counts = 23.0 +/- 5.1
  Background counts = 3.0
  Rate = 0.0005 +/- 0.0001

[Sun Oct 16 07:55:23 2011] Off-axis axis estimate = 5.85'
[Sun Oct 16 07:56:25 2011] Using EEF radius (= 1.55 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:56:25 2011] Initial guess for spatial extent in simple fitting = 1.55"
[Sun Oct 16 07:56:25 2011] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.045
[Sun Oct 16 07:56:25 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 1.55"
[Sun Oct 16 07:56:27 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src18.ximg exists
[Sun Oct 16 07:56:27 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src18_1.ximg exists
[Sun Oct 16 07:56:27 2011] Fit fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src18 appears to have run properly
[Sun Oct 16 07:56:28 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sun Oct 16 07:56:29 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Oct 16 07:56:29 2011] Fit fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Oct 16 07:56:46 2011] Spatial fit model total counts = 27.910100, observed total counts = 28.000000
[Sun Oct 16 07:56:46 2011] Offset between fit and detection position for source 28 = 0.772474 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.772474 pixels
  Position = (615.9, 454.3) = 16 15 46.29 19 23 2.9
  Extent = 1.5 (1.2-2.5)" x 1.0 (0.8-1.3)", rotation angle = 0 (158-0) degrees
  Source counts = 27.7 +/- 5.3
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sun Oct 16 07:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:56:46 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 07:56:46 2011] Source does appear to be extended
[Sun Oct 16 07:56:46 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.95
[Sun Oct 16 07:57:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:57:11 2011] Initial guess for spatial extent in simple fitting = 1.27"
[Sun Oct 16 07:57:11 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.951
[Sun Oct 16 07:57:11 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 1.27"
[Sun Oct 16 07:57:12 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src18.ximg exists
[Sun Oct 16 07:57:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src18.csv
[Sun Oct 16 07:57:12 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src18_1.ximg exists
[Sun Oct 16 07:57:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src18.csv
[Sun Oct 16 07:57:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 07:57:13 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sun Oct 16 07:57:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src18.csv
[Sun Oct 16 07:57:13 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Oct 16 07:57:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src18.csv
[Sun Oct 16 07:57:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 07:57:30 2011] Spatial fit model total counts = 24.891600, observed total counts = 27.000000
[Sun Oct 16 07:57:30 2011] Offset between fit and detection position for source 28 = 0.556557 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.556557 pixels
  Position = (615.3, 454.4) = 16 15 46.31 19 23 3.0
  Extent = 1.2 (0.9-1.4)", rotation angle = 0
  Source counts = 25.0 +/- 5.0
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sun Oct 16 07:57:30 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:57:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:57:30 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 07:57:30 2011] Source does appear to be extended
[Sun Oct 16 07:57:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 08:01:23 2011] Not overwriting source region fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28_src.reg
[Sun Oct 16 08:01:23 2011] Extracting stamp from image fullrun_ccd3_acisf10230_pi14-548_cl_sm2.00.img.gz, (561, 400) - (670, 509)
[Sun Oct 16 08:01:23 2011] Writing fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28.gif
[Sun Oct 16 08:02:18 2011] ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28_src.evt and ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Sun Oct 16 08:02:18 2011] Size of ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28_src.evt.gz[events] = 27 counts
[Sun Oct 16 08:02:18 2011] Mean chipx,y = (408.74, 557.89)
[Sun Oct 16 08:02:18 2011] Mean tdetx,y = (4574.11, 3469.74)
[Sun Oct 16 08:02:18 2011] chipx,y range = (392.00-426.00, 544.00-584.00)
[Sun Oct 16 08:02:18 2011] Size of ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 88 counts
[Sun Oct 16 08:02:18 2011] ../../acisf10230/products/images/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28_src.img and ../../acisf10230/products/images/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Sun Oct 16 08:02:18 2011] ../../acisf10230/products/spectra/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28_src.pi and ../../acisf10230/products/spectra/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Sun Oct 16 08:02:18 2011] Not generating rmf since there are only 25 counts
[Sun Oct 16 08:02:21 2011] ../../acisf10230/products/lightcurves/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28_src.lc and ../../acisf10230/products/lightcurves/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Sun Oct 16 08:03:16 2011] 179.537
[Sun Oct 16 08:03:32 2011] Updating aperture counts using extracted products
[Sun Oct 16 08:03:32 2011] Error reading totcts from fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28_src.pi.gz
[Sun Oct 16 08:03:32 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 08:03:32 2011] Using photon index=1.80, rate=0.000562, arf fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28.arf
[Sun Oct 16 08:03:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 08:03:32 2011] Updating source flux to 7.3e-15
[Sun Oct 16 08:03:45 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 16 08:03:46 2011] acisf10230/analysis//spectral/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete