[Sun Oct 16 07:55:21 2011] Detection parameters:
  Position = (438.1, 879.1) = 16 15 52.47 19 26 32.2
  Extent = 0.7" x 0.5", rotation angle = 14 degrees
  Source counts = 14.3 +/- 4.0
  Background counts = 1.7
  Rate = 0.0003 +/- 9e-05

[Sun Oct 16 07:55:23 2011] Off-axis axis estimate = 5.00'
[Sun Oct 16 07:56:25 2011] Using EEF radius (= 1.18 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:56:25 2011] Initial guess for spatial extent in simple fitting = 1.18"
[Sun Oct 16 07:56:25 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.073
[Sun Oct 16 07:56:25 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 1.18"
[Sun Oct 16 07:56:27 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src23.ximg exists
[Sun Oct 16 07:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src23.csv
[Sun Oct 16 07:56:27 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src23_1.ximg exists
[Sun Oct 16 07:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src23.csv
[Sun Oct 16 07:56:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 07:56:29 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Sun Oct 16 07:56:29 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Oct 16 07:56:29 2011] Fit fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Oct 16 07:56:46 2011] Spatial fit model total counts = 20.001900, observed total counts = 20.000000
[Sun Oct 16 07:56:46 2011] Offset between fit and detection position for source 19 = 0.732349 pixels
[Sun Oct 16 07:56:46 2011] 19.510670 total counts/ 6.108770 bgd. counts: snr = 5.422374
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.732349 pixels
  Position = (438.5, 879.7) = 16 15 52.47 19 26 32.2
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 13.4 +/- 4.4
  Background counts = 6.1
  Rate = 0.0003 +/- 0.0001
[Sun Oct 16 07:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:56:46 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 07:56:46 2011] Source does appear to be extended
[Sun Oct 16 07:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 07:57:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:57:11 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Sun Oct 16 07:57:11 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.932
[Sun Oct 16 07:57:11 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 0.64"
[Sun Oct 16 07:57:12 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src23.ximg exists
[Sun Oct 16 07:57:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src23.csv
[Sun Oct 16 07:57:12 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src23_1.ximg exists
[Sun Oct 16 07:57:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src23.csv
[Sun Oct 16 07:57:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 07:57:13 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Sun Oct 16 07:57:13 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Oct 16 07:57:13 2011] Fit fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Oct 16 07:57:30 2011] Spatial fit model total counts = 19.994700, observed total counts = 20.000000
[Sun Oct 16 07:57:30 2011] Offset between fit and detection position for source 19 = 0.009041 pixels
[Sun Oct 16 07:57:30 2011] 19.499620 total counts/ 6.043220 bgd. counts: snr = 5.473873
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.009041 pixels
  Position = (438.5, 879.7) = 16 15 52.47 19 26 32.2
  Extent = 0.6 (0.4-1.1)", rotation angle = 0
  Source counts = 13.5 +/- 4.4
  Background counts = 6.0
  Rate = 0.0003 +/- 0.0001
[Sun Oct 16 07:57:30 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:57:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:57:30 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 07:57:30 2011] Source does appear to be extended
[Sun Oct 16 07:57:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 08:01:23 2011] Not overwriting source region fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19_src.reg
[Sun Oct 16 08:01:23 2011] Extracting stamp from image fullrun_ccd3_acisf10230_pi14-548_cl_sm2.00.img.gz, (409, 850) - (468, 909)
[Sun Oct 16 08:01:23 2011] Writing fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19.gif
[Sun Oct 16 08:02:33 2011] ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19_src.evt and ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Sun Oct 16 08:02:33 2011] Size of ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19_src.evt.gz[events] = 16 counts
[Sun Oct 16 08:02:33 2011] Mean chipx,y = (847.81, 422.62)
[Sun Oct 16 08:02:33 2011] Mean tdetx,y = (4709.38, 3908.81)
[Sun Oct 16 08:02:33 2011] chipx,y range = (828.00-863.00, 403.00-437.00)
[Sun Oct 16 08:02:33 2011] Size of ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 27 counts
[Sun Oct 16 08:02:33 2011] ../../acisf10230/products/images/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19_src.img and ../../acisf10230/products/images/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Sun Oct 16 08:02:33 2011] ../../acisf10230/products/spectra/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19_src.pi and ../../acisf10230/products/spectra/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Sun Oct 16 08:02:33 2011] Not generating rmf since there are only 13 counts
[Sun Oct 16 08:02:36 2011] ../../acisf10230/products/lightcurves/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19_src.lc and ../../acisf10230/products/lightcurves/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Sun Oct 16 08:03:16 2011] 189.455
[Sun Oct 16 08:03:32 2011] Updating aperture counts using extracted products
[Sun Oct 16 08:03:32 2011] Error reading totcts from fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19_src.pi.gz
[Sun Oct 16 08:03:32 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 08:03:32 2011] Using photon index=1.80, rate=0.000302, arf fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19.arf
[Sun Oct 16 08:03:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 08:03:32 2011] Updating source flux to 3.7e-15
[Sun Oct 16 08:03:45 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 16 08:03:46 2011] acisf10230/analysis//spectral/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete