[Sun Oct 16 07:55:21 2011] Detection parameters:
  Position = (873.7, 714.7) = 16 15 37.31 19 25 11.3
  Extent = 0.5" x 0.5", rotation angle = 152 degrees
  Source counts = 17.4 +/- 4.4
  Background counts = 1.6
  Rate = 0.0004 +/- 0.0001

[Sun Oct 16 07:55:23 2011] Off-axis axis estimate = 2.92'
[Sun Oct 16 07:56:25 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:56:25 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Sun Oct 16 07:56:25 2011] source mask rpix=1.1, npix_max = 10, mask sum = 6, frac = 0.553
[Sun Oct 16 07:56:25 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.56"
[Sun Oct 16 07:56:27 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src20.ximg exists
[Sun Oct 16 07:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src20.csv
[Sun Oct 16 07:56:27 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src20_1.ximg exists
[Sun Oct 16 07:56:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src20.csv
[Sun Oct 16 07:56:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10230_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 07:56:29 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Sun Oct 16 07:56:29 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Oct 16 07:56:29 2011] Fit fullrun_ccd3_acisf10230_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Oct 16 07:56:46 2011] Spatial fit model total counts = 24.128500, observed total counts = 26.000000
[Sun Oct 16 07:56:46 2011] Offset between fit and detection position for source 15 = 0.513754 pixels
[Sun Oct 16 07:56:46 2011] 23.640400 total counts/ 2.170600 bgd. counts: snr = 14.572635
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.513754 pixels
  Position = (874.2, 714.9) = 16 15 37.31 19 25 11.2
  Extent = 0.7 (0.4-0.8)", rotation angle = 0
  Source counts = 21.5 +/- 4.9
  Background counts = 2.2
  Rate = 0.0005 +/- 0.0001
[Sun Oct 16 07:56:46 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:56:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:56:46 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 07:56:46 2011] Source does appear to be extended
[Sun Oct 16 07:56:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 07:57:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:57:11 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Sun Oct 16 07:57:11 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.854
[Sun Oct 16 07:57:11 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.68"
[Sun Oct 16 07:57:12 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src20.ximg exists
[Sun Oct 16 07:57:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src20.csv
[Sun Oct 16 07:57:12 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src20_1.ximg exists
[Sun Oct 16 07:57:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src20.csv
[Sun Oct 16 07:57:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10230_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 07:57:13 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Sun Oct 16 07:57:13 2011] fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Oct 16 07:57:13 2011] Fit fullrun_ccd3_acisf10230_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Oct 16 07:57:30 2011] Spatial fit model total counts = 24.756600, observed total counts = 26.000000
[Sun Oct 16 07:57:30 2011] Offset between fit and detection position for source 15 = 0.020097 pixels
[Sun Oct 16 07:57:30 2011] 24.328940 total counts/ 2.645040 bgd. counts: snr = 13.332797
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.020097 pixels
  Position = (874.2, 714.9) = 16 15 37.31 19 25 11.2
  Extent = 0.7 (0.4-1.0)", rotation angle = 0
  Source counts = 21.7 +/- 4.9
  Background counts = 2.6
  Rate = 0.0005 +/- 0.0001
[Sun Oct 16 07:57:30 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:57:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:57:30 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 07:57:30 2011] Source does appear to be extended
[Sun Oct 16 07:57:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 08:01:23 2011] Not overwriting source region fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15_src.reg
[Sun Oct 16 08:01:23 2011] Extracting stamp from image fullrun_ccd3_acisf10230_pi14-548_cl_sm2.00.img.gz, (843, 684) - (905, 746)
[Sun Oct 16 08:01:23 2011] Writing fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15.gif
[Sun Oct 16 08:02:24 2011] ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15_src.evt and ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sun Oct 16 08:02:24 2011] Size of ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15_src.evt.gz[events] = 23 counts
[Sun Oct 16 08:02:24 2011] Mean chipx,y = (645.96, 841.83)
[Sun Oct 16 08:02:24 2011] Mean tdetx,y = (4290.17, 3706.96)
[Sun Oct 16 08:02:24 2011] chipx,y range = (631.00-666.00, 824.00-858.00)
[Sun Oct 16 08:02:24 2011] Size of ../../acisf10230/products/events/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 20 counts
[Sun Oct 16 08:02:24 2011] ../../acisf10230/products/images/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15_src.img and ../../acisf10230/products/images/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Sun Oct 16 08:02:24 2011] ../../acisf10230/products/spectra/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15_src.pi and ../../acisf10230/products/spectra/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sun Oct 16 08:02:24 2011] Not generating rmf since there are only 21 counts
[Sun Oct 16 08:02:27 2011] ../../acisf10230/products/lightcurves/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15_src.lc and ../../acisf10230/products/lightcurves/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sun Oct 16 08:03:16 2011] 181.417
[Sun Oct 16 08:03:32 2011] Updating aperture counts using extracted products
[Sun Oct 16 08:03:32 2011] Error reading totcts from fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15_src.pi.gz
[Sun Oct 16 08:03:32 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 08:03:32 2011] Using photon index=1.80, rate=0.000487, arf fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15.arf
[Sun Oct 16 08:03:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 08:03:32 2011] Updating source flux to 6.2e-15
[Sun Oct 16 08:03:45 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 16 08:03:46 2011] acisf10230/analysis//spectral/fullrun_ccd3_acisf10230_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete