[Sun Oct 16 07:55:18 2011] Detection parameters:
  Position = (317.4, 782.6) = 16 15 20.35 19 26 20.7
  Extent = 0.6" x 0.5", rotation angle = 20 degrees
  Source counts = 242.0 +/- 15.7
  Background counts = 4.0
  Rate = 0.005 +/- 0.0004

[Sun Oct 16 07:55:20 2011] Off-axis axis estimate = 3.12'
[Sun Oct 16 07:56:24 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:56:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 07:56:24 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Sun Oct 16 07:56:24 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.754
[Sun Oct 16 07:56:24 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.60"
[Sun Oct 16 07:56:25 2011] fullrun_ccd2_acisf10230_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 16 07:56:25 2011] fullrun_ccd2_acisf10230_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 16 07:56:25 2011] Fit fullrun_ccd2_acisf10230_pi14-548_cl_pass0_src1 appears to have run properly
[Sun Oct 16 07:56:25 2011] fullrun_ccd2_acisf10230_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 16 07:56:25 2011] fullrun_ccd2_acisf10230_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 16 07:56:25 2011] Fit fullrun_ccd2_acisf10230_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 16 07:56:40 2011] Spatial fit model total counts = 250.912000, observed total counts = 251.000000
[Sun Oct 16 07:56:40 2011] Offset between fit and detection position for source 9 = 0.686116 pixels
[Sun Oct 16 07:56:40 2011] 251.583300 total counts/ 12.915300 bgd. counts: snr = 66.411294
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.686116 pixels
  Position = (317.8, 783.1) = 16 15 20.35 19 26 20.7
  Extent = 0.9" x 0.5", rotation angle = 343
  Source counts = 238.7 +/- 15.9
  Background counts = 12.9
  Rate = 0.005 +/- 0.0004
[Sun Oct 16 07:56:40 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:56:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:56:40 2011] Assessing source extent using major
[Sun Oct 16 07:56:40 2011] Source does appear to be extended
[Sun Oct 16 07:56:40 2011] Computing asymmetry using major and minor axis, asym = 1.77
[Sun Oct 16 07:56:40 2011] Source is asymmetric
[Sun Oct 16 07:57:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:57:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 07:57:09 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Sun Oct 16 07:57:09 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.115
[Sun Oct 16 07:57:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.69"
[Sun Oct 16 07:57:10 2011] fullrun_ccd2_acisf10230_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 16 07:57:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10230_pi14-548_cl_pass1_src1.csv
[Sun Oct 16 07:57:10 2011] fullrun_ccd2_acisf10230_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 16 07:57:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10230_pi14-548_cl_pass1_src1.csv
[Sun Oct 16 07:57:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10230_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10230_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 07:57:10 2011] fullrun_ccd2_acisf10230_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 16 07:57:10 2011] fullrun_ccd2_acisf10230_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 16 07:57:10 2011] Fit fullrun_ccd2_acisf10230_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 16 07:57:24 2011] Spatial fit model total counts = 253.140000, observed total counts = 251.000000
[Sun Oct 16 07:57:24 2011] Offset between fit and detection position for source 9 = 0.056248 pixels
[Sun Oct 16 07:57:24 2011] 253.168700 total counts/ 14.243700 bgd. counts: snr = 63.306774
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.056248 pixels
  Position = (317.9, 783.1) = 16 15 20.35 19 26 20.7
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 238.9 +/- 15.9
  Background counts = 14.2
  Rate = 0.005 +/- 0.0004
[Sun Oct 16 07:57:24 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:57:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:57:24 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 07:57:24 2011] Source does appear to be extended
[Sun Oct 16 07:57:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 07:59:50 2011] Not overwriting source region fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_src.reg
[Sun Oct 16 07:59:50 2011] Extracting stamp from image fullrun_ccd2_acisf10230_pi14-548_cl_sm2.00.img.gz, (289, 754) - (347, 812)
[Sun Oct 16 07:59:50 2011] Writing fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9.gif
[Sun Oct 16 07:59:52 2011] ../../acisf10230/products/events/fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_src.evt and ../../acisf10230/products/events/fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Oct 16 07:59:52 2011] Size of ../../acisf10230/products/events/fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_src.evt.gz[events] = 242 counts
[Sun Oct 16 07:59:52 2011] Mean chipx,y = (275.32, 730.38)
[Sun Oct 16 07:59:52 2011] Mean tdetx,y = (3791.38, 3810.68)
[Sun Oct 16 07:59:52 2011] chipx,y range = (258.00-294.00, 710.00-750.00)
[Sun Oct 16 07:59:52 2011] Size of ../../acisf10230/products/events/fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 23 counts
[Sun Oct 16 07:59:52 2011] ../../acisf10230/products/images/fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_src.img and ../../acisf10230/products/images/fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Oct 16 07:59:52 2011] ../../acisf10230/products/spectra/fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_src.pi and ../../acisf10230/products/spectra/fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Oct 16 07:59:55 2011] ../../acisf10230/products/lightcurves/fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_src.lc and ../../acisf10230/products/lightcurves/fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Oct 16 08:01:22 2011] Keeping rmf generated by specextract
[Sun Oct 16 08:01:22 2011] 192.01
[Sun Oct 16 08:03:31 2011] Updating aperture counts using extracted products
[Sun Oct 16 08:03:31 2011] Error reading totcts from fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Oct 16 08:03:31 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 08:03:31 2011] Using photon index=1.80, rate=0.00536, arf fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9.arf
[Sun Oct 16 08:03:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 08:03:31 2011] Updating source flux to 6.4e-14
[Sun Oct 16 08:03:45 2011] Reading fit data from acisf10230/analysis//spectral/fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_pl.csv
[Sun Oct 16 08:03:45 2011] Spectral fit parameter nH value = 6.75539e+20
[Sun Oct 16 08:03:45 2011] Spectral fit parameter PhoIndex value = 1.86944
[Sun Oct 16 08:03:45 2011] Failed to get F(0.3-8.0) from acisf10230/analysis//spectral/fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9_pl.csv, possibly due to different flux energy range selected
[Sun Oct 16 08:03:45 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 08:03:45 2011] Using Nh = 6.8e+20, photon index=1.87, rate=0.00536, arf fullrun_ccd2_acisf10230_pi14-548_pass1_cl_src9.arf
[Sun Oct 16 08:03:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 08:03:45 2011] Updating source flux to 6.1e-14