[Sun Oct 16 07:55:16 2011] Detection parameters:
  Position = (894.9, 505.5) = 16 15 39.26 19 31 58.1
  Extent = 0.6" x 0.5", rotation angle = 131 degrees
  Source counts = 52.3 +/- 7.3
  Background counts = 1.7
  Rate = 0.001 +/- 0.0002

[Sun Oct 16 07:55:17 2011] Off-axis axis estimate = 4.49'
[Sun Oct 16 07:56:22 2011] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:56:22 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Sun Oct 16 07:56:22 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.994
[Sun Oct 16 07:56:22 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.99"
[Sun Oct 16 07:56:23 2011] fullrun_ccd1_acisf10230_pi14-548_cl_pass0_src6.ximg exists
[Sun Oct 16 07:56:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10230_pi14-548_cl_pass0_src6.csv
[Sun Oct 16 07:56:23 2011] fullrun_ccd1_acisf10230_pi14-548_cl_pass0_src6_1.ximg exists
[Sun Oct 16 07:56:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10230_pi14-548_cl_pass0_src6.csv
[Sun Oct 16 07:56:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10230_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10230_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 07:56:23 2011] fullrun_ccd1_acisf10230_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sun Oct 16 07:56:23 2011] fullrun_ccd1_acisf10230_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Oct 16 07:56:23 2011] Fit fullrun_ccd1_acisf10230_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Oct 16 07:56:38 2011] Spatial fit model total counts = 53.859100, observed total counts = 60.000000
[Sun Oct 16 07:56:38 2011] Offset between fit and detection position for source 9 = 0.623873 pixels
[Sun Oct 16 07:56:38 2011] 53.404300 total counts/ 0.013900 bgd. counts: snr = 452.846576
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.623873 pixels
  Position = (895.4, 505.9) = 16 15 39.26 19 31 58.1
  Extent = 0.9 (0.8-1.2)" x 0.5 (0.4-0.6)", rotation angle = 56 (43-70) degrees
  Source counts = 53.4 +/- 7.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sun Oct 16 07:56:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:56:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:56:38 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 07:56:38 2011] Source does appear to be extended
[Sun Oct 16 07:56:38 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Sun Oct 16 07:57:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 07:57:07 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Sun Oct 16 07:57:07 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.044
[Sun Oct 16 07:57:07 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.72"
[Sun Oct 16 07:57:09 2011] fullrun_ccd1_acisf10230_pi14-548_cl_pass1_src6.ximg exists
[Sun Oct 16 07:57:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10230_pi14-548_cl_pass1_src6.csv
[Sun Oct 16 07:57:09 2011] fullrun_ccd1_acisf10230_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Oct 16 07:57:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10230_pi14-548_cl_pass1_src6.csv
[Sun Oct 16 07:57:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10230_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10230_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 07:57:09 2011] fullrun_ccd1_acisf10230_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Oct 16 07:57:09 2011] fullrun_ccd1_acisf10230_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Oct 16 07:57:09 2011] Fit fullrun_ccd1_acisf10230_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Oct 16 07:57:22 2011] Spatial fit model total counts = 57.550600, observed total counts = 61.000000
[Sun Oct 16 07:57:22 2011] Offset between fit and detection position for source 9 = 0.349926 pixels
[Sun Oct 16 07:57:22 2011] 56.398200 total counts/ 12.598900 bgd. counts: snr = 12.339594
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.349926 pixels
  Position = (895.7, 505.7) = 16 15 39.25 19 31 58.0
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 43.8 +/- 7.5
  Background counts = 12.6
  Rate = 0.001 +/- 0.0002
[Sun Oct 16 07:57:22 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 07:57:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 07:57:22 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 07:57:22 2011] Source does appear to be extended
[Sun Oct 16 07:57:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 07:58:51 2011] Not overwriting source region fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9_src.reg
[Sun Oct 16 07:58:51 2011] Extracting stamp from image fullrun_ccd1_acisf10230_pi14-548_cl_sm2.00.img.gz, (873, 483) - (919, 529)
[Sun Oct 16 07:58:51 2011] Writing fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9.gif
[Sun Oct 16 07:59:07 2011] ../../acisf10230/products/events/fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9_src.evt and ../../acisf10230/products/events/fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Oct 16 07:59:07 2011] Size of ../../acisf10230/products/events/fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9_src.evt.gz[events] = 47 counts
[Sun Oct 16 07:59:07 2011] Mean chipx,y = (428.53, 851.72)
[Sun Oct 16 07:59:07 2011] Mean tdetx,y = (4280.28, 4535.53)
[Sun Oct 16 07:59:07 2011] chipx,y range = (413.00-447.00, 834.00-868.00)
[Sun Oct 16 07:59:07 2011] Size of ../../acisf10230/products/events/fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 8 counts
[Sun Oct 16 07:59:07 2011] ../../acisf10230/products/images/fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9_src.img and ../../acisf10230/products/images/fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Oct 16 07:59:07 2011] ../../acisf10230/products/spectra/fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9_src.pi and ../../acisf10230/products/spectra/fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Oct 16 07:59:07 2011] Not generating rmf since there are only 43 counts
[Sun Oct 16 07:59:10 2011] ../../acisf10230/products/lightcurves/fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9_src.lc and ../../acisf10230/products/lightcurves/fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Oct 16 07:59:49 2011] 185.695
[Sun Oct 16 08:03:31 2011] Updating aperture counts using extracted products
[Sun Oct 16 08:03:31 2011] Error reading totcts from fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Oct 16 08:03:31 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 08:03:31 2011] Using photon index=1.80, rate=0.000983, arf fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9.arf
[Sun Oct 16 08:03:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 08:03:31 2011] Updating source flux to 1.2e-14
[Sun Oct 16 08:03:41 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 16 08:03:42 2011] acisf10230/analysis//spectral/fullrun_ccd1_acisf10230_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete