[Thu Oct 20 23:09:19 2011] Detection parameters:
  Position = (588.8, 647.6) = 8 35 24.18 -45 10 10.2
  Extent = 0.5" x 0.5", rotation angle = 147 degrees
  Source counts = 24.6 +/- 11.6
  Background counts = 109.4
  Rate = 0.0006 +/- 0.0003

[Thu Oct 20 23:09:19 2011] Off-axis axis estimate = 2.50'
[Thu Oct 20 23:11:32 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 23:11:32 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Thu Oct 20 23:11:32 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 1.000
[Thu Oct 20 23:11:32 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.49"
[Thu Oct 20 23:11:34 2011] fullrun_ccd7_acisf10139_pi14-548_cl_pass0_src28.ximg exists
[Thu Oct 20 23:11:34 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10139_pi14-548_cl_pass0_src28.csv
[Thu Oct 20 23:11:34 2011] fullrun_ccd7_acisf10139_pi14-548_cl_pass0_src28_1.ximg exists
[Thu Oct 20 23:11:34 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10139_pi14-548_cl_pass0_src28.csv
[Thu Oct 20 23:11:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10139_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10139_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 23:11:35 2011] fullrun_ccd7_acisf10139_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Thu Oct 20 23:11:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10139_pi14-548_cl_pass0_tfrozen_src28.csv
[Thu Oct 20 23:11:35 2011] fullrun_ccd7_acisf10139_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Oct 20 23:11:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10139_pi14-548_cl_pass0_tfrozen_src28.csv
[Thu Oct 20 23:11:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10139_pi14-548_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10139_pi14-548_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 23:11:45 2011] Spatial fit model total counts = -0.000131, observed total counts = 955.000000
[Thu Oct 20 23:11:45 2011] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Oct 20 23:11:45 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 23:11:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 23:11:45 2011] Assessing source extent using major
[Thu Oct 20 23:11:45 2011] Source does appear to be extended
[Thu Oct 20 23:11:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 23:11:45 2011] Deleting source due to low Poisson probability 0.7