[Thu Oct 27 14:37:26 2011] Detection parameters:
  Position = (296.5, 546.1) = 8 34 53.00 -45 12 54.9
  Extent = 0.9" x 0.6", rotation angle = 16 degrees
  Source counts = 252.4 +/- 16.4
  Background counts = 17.6
  Rate = 0.006 +/- 0.0004

[Thu Oct 27 14:37:27 2011] Off-axis axis estimate = 3.58'
[Thu Oct 27 14:39:40 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 14:39:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 14:39:40 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Thu Oct 27 14:39:40 2011] source mask rpix=1.4, npix_max = 15, mask sum = 12, frac = 0.791
[Thu Oct 27 14:39:40 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.71"
[Thu Oct 27 14:39:41 2011] fullrun_ccd6_acisf10137_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 27 14:39:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10137_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 14:39:41 2011] fullrun_ccd6_acisf10137_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 27 14:39:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10137_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 14:39:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10137_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10137_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 14:39:41 2011] fullrun_ccd6_acisf10137_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 27 14:39:41 2011] fullrun_ccd6_acisf10137_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 27 14:39:41 2011] Fit fullrun_ccd6_acisf10137_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 27 14:39:48 2011] Spatial fit model total counts = 266.998000, observed total counts = 267.000000
[Thu Oct 27 14:39:48 2011] Offset between fit and detection position for source 3 = 0.701154 pixels
[Thu Oct 27 14:39:48 2011] 266.559700 total counts/ 25.883700 bgd. counts: snr = 47.306368
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.701154 pixels
  Position = (297.1, 546.5) = 8 34 53.00 -45 12 54.9
  Extent = 1.0 (0.9-1.1)", rotation angle = 0
  Source counts = 240.7 +/- 16.3
  Background counts = 25.9
  Rate = 0.006 +/- 0.0004
[Thu Oct 27 14:39:48 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 14:39:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 14:39:48 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 14:39:48 2011] Source does appear to be extended
[Thu Oct 27 14:39:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 14:40:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 14:40:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 14:40:07 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Thu Oct 27 14:40:07 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.103
[Thu Oct 27 14:40:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.04"
[Thu Oct 27 14:40:08 2011] fullrun_ccd6_acisf10137_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 27 14:40:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10137_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 14:40:08 2011] fullrun_ccd6_acisf10137_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 27 14:40:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10137_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 14:40:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10137_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10137_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 14:40:08 2011] fullrun_ccd6_acisf10137_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 27 14:40:08 2011] fullrun_ccd6_acisf10137_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 27 14:40:08 2011] Fit fullrun_ccd6_acisf10137_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 27 14:40:13 2011] Spatial fit model total counts = 269.000000, observed total counts = 269.000000
[Thu Oct 27 14:40:13 2011] Offset between fit and detection position for source 3 = 0.013284 pixels
[Thu Oct 27 14:40:13 2011] 268.289400 total counts/ 26.159400 bgd. counts: snr = 47.340704
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.013284 pixels
  Position = (297.1, 546.5) = 8 34 53.00 -45 12 54.9
  Extent = 1.0 (0.9-1.1)", rotation angle = 0
  Source counts = 242.1 +/- 16.4
  Background counts = 26.2
  Rate = 0.006 +/- 0.0004
[Thu Oct 27 14:40:13 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 14:40:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 14:40:13 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 14:40:13 2011] Source does appear to be extended
[Thu Oct 27 14:40:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 14:40:40 2011] Not overwriting source region fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_src.reg
[Thu Oct 27 14:40:40 2011] Extracting stamp from image fullrun_ccd6_acisf10137_pi14-548_cl_sm2.00.img.gz, (250, 499) - (345, 594)
[Thu Oct 27 14:40:40 2011] Writing fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3.gif
[Thu Oct 27 14:40:41 2011] ../../acisf10137/products/events/fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_src.evt and ../../acisf10137/products/events/fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Oct 27 14:40:41 2011] Size of ../../acisf10137/products/events/fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_src.evt.gz[events] = 264 counts
[Thu Oct 27 14:40:41 2011] Mean chipx,y = (816.05, 369.29)
[Thu Oct 27 14:40:41 2011] Mean tdetx,y = (3691.05, 2071.29)
[Thu Oct 27 14:40:41 2011] chipx,y range = (797.00-836.00, 346.00-391.00)
[Thu Oct 27 14:40:41 2011] Size of ../../acisf10137/products/events/fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 168 counts
[Thu Oct 27 14:40:41 2011] ../../acisf10137/products/images/fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_src.img and ../../acisf10137/products/images/fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Oct 27 14:40:41 2011] ../../acisf10137/products/spectra/fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_src.pi and ../../acisf10137/products/spectra/fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Oct 27 14:40:44 2011] ../../acisf10137/products/lightcurves/fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_src.lc and ../../acisf10137/products/lightcurves/fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Oct 27 14:40:58 2011] Keeping rmf generated by specextract
[Thu Oct 27 14:40:58 2011] 200.602
[Thu Oct 27 14:41:53 2011] Updating aperture counts using extracted products
[Thu Oct 27 14:41:53 2011] Error reading totcts from fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Oct 27 14:41:53 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 14:41:53 2011] Using photon index=1.80, rate=0.00612, arf fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3.arf
[Thu Oct 27 14:41:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 14:41:53 2011] Updating source flux to 8.3e-14
[Thu Oct 27 14:42:02 2011] Reading fit data from acisf10137/analysis//spectral/fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_pl.csv
[Thu Oct 27 14:42:02 2011] Spectral fit parameter nH value = 1.06764e+22
[Thu Oct 27 14:42:02 2011] Spectral fit parameter PhoIndex value = 2.3777
[Thu Oct 27 14:42:02 2011] Failed to get F(0.3-8.0) from acisf10137/analysis//spectral/fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Oct 27 14:42:02 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 14:42:02 2011] Using Nh = 1.1e+22, photon index=2.38, rate=0.00612, arf fullrun_ccd6_acisf10137_pi14-548_pass1_cl_src3.arf
[Thu Oct 27 14:42:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 14:42:02 2011] Updating source flux to 7.2e-14