[Mon Oct 17 20:21:35 2011] Detection parameters:
  Position = (764.2, 567.7) = 8 35 18.32 -45 10 52.0
  Extent = 0.7" x 0.7", rotation angle = 110 degrees
  Source counts = 991.4 +/- 50.7
  Background counts = 1576.6
  Rate = 0.03 +/- 0.001

[Mon Oct 17 20:21:38 2011] Off-axis axis estimate = 1.38'
[Mon Oct 17 20:23:35 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 20:23:35 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Oct 17 20:23:35 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.905
[Mon Oct 17 20:23:35 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.39"
[Mon Oct 17 20:23:36 2011] fullrun_ccd7_acisf10133_pi14-548_cl_pass0_src13.ximg exists
[Mon Oct 17 20:23:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10133_pi14-548_cl_pass0_src13.csv
[Mon Oct 17 20:23:36 2011] fullrun_ccd7_acisf10133_pi14-548_cl_pass0_src13_1.ximg exists
[Mon Oct 17 20:23:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10133_pi14-548_cl_pass0_src13.csv
[Mon Oct 17 20:23:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10133_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10133_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 20:23:37 2011] fullrun_ccd7_acisf10133_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon Oct 17 20:23:37 2011] fullrun_ccd7_acisf10133_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Oct 17 20:23:37 2011] Fit fullrun_ccd7_acisf10133_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Oct 17 20:23:49 2011] Spatial fit model total counts = 4677.200000, observed total counts = 4679.000000
[Mon Oct 17 20:23:49 2011] Offset between fit and detection position for source 10 = 3.379497 pixels
[Mon Oct 17 20:23:49 2011] 4635.896000 total counts/ 4257.310000 bgd. counts: snr = 5.802256
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 3.379497 pixels
  Position = (762.8, 570.8) = 8 35 18.41 -45 10 50.8
  Extent = 1.5 (1.5-1.5)", rotation angle = 0
  Source counts = 378.6 +/- 68.1
  Background counts = 4257.3
  Rate = 0.01 +/- 0.002
[Mon Oct 17 20:23:49 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 20:23:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 20:23:49 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 20:23:49 2011] Source does appear to be extended
[Mon Oct 17 20:23:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 20:24:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 20:24:02 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Mon Oct 17 20:24:02 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Mon Oct 17 20:24:02 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.50"
[Mon Oct 17 20:24:03 2011] fullrun_ccd7_acisf10133_pi14-548_cl_pass1_src13.ximg exists
[Mon Oct 17 20:24:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10133_pi14-548_cl_pass1_src13.csv
[Mon Oct 17 20:24:03 2011] fullrun_ccd7_acisf10133_pi14-548_cl_pass1_src13_1.ximg exists
[Mon Oct 17 20:24:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10133_pi14-548_cl_pass1_src13.csv
[Mon Oct 17 20:24:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10133_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10133_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 20:24:04 2011] fullrun_ccd7_acisf10133_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Mon Oct 17 20:24:04 2011] fullrun_ccd7_acisf10133_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Oct 17 20:24:04 2011] Fit fullrun_ccd7_acisf10133_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Oct 17 20:24:10 2011] Spatial fit model total counts = 6783.160000, observed total counts = 6781.000000
[Mon Oct 17 20:24:10 2011] Offset between fit and detection position for source 10 = 7.853248 pixels
[Mon Oct 17 20:24:10 2011] 6709.850000 total counts/ 5000.420000 bgd. counts: snr = 24.173976
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 7.853248 pixels
  Position = (758.5, 577.4) = 8 35 18.61 -45 10 47.5
  Extent = 3.0 (2.7-6.0)", rotation angle = 0
  Source counts = 1709.4 +/- 81.9
  Background counts = 5000.4
  Rate = 0.04 +/- 0.002
[Mon Oct 17 20:24:10 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 20:24:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 20:24:10 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 20:24:10 2011] Source does appear to be extended
[Mon Oct 17 20:24:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 20:24:10 2011] Source is confused with source 15
[Mon Oct 17 20:24:57 2011] Not overwriting source region fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10_src.reg
[Mon Oct 17 20:24:57 2011] Extracting stamp from image fullrun_ccd7_acisf10133_pi14-548_cl_sm2.00.img.gz, (622, 441) - (895, 714)
[Mon Oct 17 20:24:57 2011] Writing fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10.gif
[Mon Oct 17 20:25:30 2011] ../../acisf10133/products/events/fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10_src.evt and ../../acisf10133/products/events/fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Oct 17 20:25:30 2011] Size of ../../acisf10133/products/events/fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10_src.evt.gz[events] = 37582 counts
[Mon Oct 17 20:25:30 2011] Mean chipx,y = (373.03, 503.91)
[Mon Oct 17 20:25:30 2011] Mean tdetx,y = (4290.03, 2205.91)
[Mon Oct 17 20:25:30 2011] chipx,y range = (328.00-410.00, 461.00-545.00)
[Mon Oct 17 20:25:31 2011] Size of ../../acisf10133/products/events/fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 60937 counts
[Mon Oct 17 20:25:31 2011] ../../acisf10133/products/images/fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10_src.img and ../../acisf10133/products/images/fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Oct 17 20:25:31 2011] ../../acisf10133/products/spectra/fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10_src.pi and ../../acisf10133/products/spectra/fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon Oct 17 20:25:33 2011] ../../acisf10133/products/lightcurves/fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10_src.lc and ../../acisf10133/products/lightcurves/fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Oct 17 20:25:49 2011] Keeping rmf generated by specextract
[Mon Oct 17 20:25:49 2011] 234.121
[Mon Oct 17 20:25:52 2011] Updating aperture counts using extracted products
[Mon Oct 17 20:25:52 2011] Error reading totcts from fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Oct 17 20:25:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 20:25:52 2011] Using photon index=1.80, rate=0.0432, arf fullrun_ccd7_acisf10133_pi14-548_pass1_cl_src10.arf
[Mon Oct 17 20:25:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 20:25:52 2011] Updating source flux to 4.8e-13
[Mon Oct 17 20:26:01 2011] Flag c found in src. 10 procflags, skipping spectral fitting