[Wed Aug  8 00:28:58 2012] Detection parameters:
  Position = (953.1, 759.7) = 12 28 10.38 44 5 58.5
  Extent = 0.5" x 0.5", rotation angle = 156 degrees
  Source counts = 19.7 +/- 4.7
  Background counts = 2.3
  Rate = 0.001 +/- 0.0003

[Wed Aug  8 00:28:59 2012] Off-axis axis estimate = 0.86'
[Wed Aug  8 00:29:40 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 00:29:40 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Aug  8 00:29:40 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Wed Aug  8 00:29:40 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 0.38"
[Wed Aug  8 00:29:41 2012] fullrun_ccd7_acisf10125_pi14-548_cl_pass0_src13.ximg exists
[Wed Aug  8 00:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10125_pi14-548_cl_pass0_src13.csv
[Wed Aug  8 00:29:41 2012] fullrun_ccd7_acisf10125_pi14-548_cl_pass0_src13_1.ximg exists
[Wed Aug  8 00:29:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10125_pi14-548_cl_pass0_src13.csv
[Wed Aug  8 00:29:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10125_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10125_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 00:29:41 2012] fullrun_ccd7_acisf10125_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Wed Aug  8 00:29:41 2012] fullrun_ccd7_acisf10125_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Aug  8 00:29:41 2012] Fit fullrun_ccd7_acisf10125_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Aug  8 00:29:47 2012] Spatial fit model total counts = 26.012600, observed total counts = 26.000000
[Wed Aug  8 00:29:47 2012] Offset between fit and detection position for source 10 = 0.592000 pixels
[Wed Aug  8 00:29:47 2012] 25.867020 total counts/ 6.059720 bgd. counts: snr = 8.046352
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.592000 pixels
  Position = (953.5, 760.2) = 12 28 10.39 44 5 58.5
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 19.8 +/- 5.1
  Background counts = 6.1
  Rate = 0.001 +/- 0.0003
[Wed Aug  8 00:29:47 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 00:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 00:29:47 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 00:29:47 2012] Source does appear to be extended
[Wed Aug  8 00:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 00:30:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 00:30:05 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Wed Aug  8 00:30:05 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.220
[Wed Aug  8 00:30:05 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 0.42"
[Wed Aug  8 00:30:06 2012] fullrun_ccd7_acisf10125_pi14-548_cl_pass1_src12.ximg exists
[Wed Aug  8 00:30:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10125_pi14-548_cl_pass1_src12.csv
[Wed Aug  8 00:30:06 2012] fullrun_ccd7_acisf10125_pi14-548_cl_pass1_src12_1.ximg exists
[Wed Aug  8 00:30:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10125_pi14-548_cl_pass1_src12.csv
[Wed Aug  8 00:30:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10125_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10125_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 00:30:06 2012] fullrun_ccd7_acisf10125_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Wed Aug  8 00:30:06 2012] fullrun_ccd7_acisf10125_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Aug  8 00:30:06 2012] Fit fullrun_ccd7_acisf10125_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Aug  8 00:30:12 2012] Spatial fit model total counts = 26.014800, observed total counts = 26.000000
[Wed Aug  8 00:30:12 2012] Offset between fit and detection position for source 10 = 0.008887 pixels
[Wed Aug  8 00:30:12 2012] 25.871440 total counts/ 6.128040 bgd. counts: snr = 7.975559
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.008887 pixels
  Position = (953.5, 760.2) = 12 28 10.39 44 5 58.5
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 19.7 +/- 5.1
  Background counts = 6.1
  Rate = 0.001 +/- 0.0003
[Wed Aug  8 00:30:12 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 00:30:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 00:30:12 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 00:30:12 2012] Source does appear to be extended
[Wed Aug  8 00:30:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 00:31:04 2012] Not overwriting source region fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10_src.reg
[Wed Aug  8 00:31:04 2012] Extracting stamp from image fullrun_ccd7_acisf10125_pi14-548_cl_sm2.00.img.gz, (934, 741) - (973, 779)
[Wed Aug  8 00:31:04 2012] Writing fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10.gif
[Wed Aug  8 00:31:47 2012] ../../acisf10125/products/events/fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10_src.evt and ../../acisf10125/products/events/fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Aug  8 00:31:47 2012] Size of ../../acisf10125/products/events/fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10_src.evt.gz[events] = 21 counts
[Wed Aug  8 00:31:47 2012] Mean chipx,y = (270.52, 430.19)
[Wed Aug  8 00:31:47 2012] Mean tdetx,y = (4187.52, 2132.19)
[Wed Aug  8 00:31:47 2012] chipx,y range = (254.00-282.00, 411.00-444.00)
[Wed Aug  8 00:31:47 2012] Size of ../../acisf10125/products/events/fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 16 counts
[Wed Aug  8 00:31:47 2012] ../../acisf10125/products/images/fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10_src.img and ../../acisf10125/products/images/fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Aug  8 00:31:47 2012] ../../acisf10125/products/spectra/fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10_src.pi and ../../acisf10125/products/spectra/fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Aug  8 00:31:47 2012] Not generating rmf since there are only 19 counts
[Wed Aug  8 00:31:51 2012] ../../acisf10125/products/lightcurves/fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10_src.lc and ../../acisf10125/products/lightcurves/fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Aug  8 00:32:25 2012] 221.252
[Wed Aug  8 00:32:30 2012] Updating aperture counts using extracted products
[Wed Aug  8 00:32:30 2012] Error reading totcts from fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Aug  8 00:32:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 00:32:30 2012] Using photon index=1.80, rate=0.00132, arf fullrun_ccd7_acisf10125_pi14-548_pass1_cl_src10.arf
[Wed Aug  8 00:32:30 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Aug  8 00:32:30 2012] Updating source flux to 1e-14
[Wed Aug  8 00:32:36 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting