[Fri Oct 28 14:59:03 2011] Detection parameters:
  Position = (349.9, 1023.3) = 13 59 14.04 47 5 24.0
  Extent = 1.5" x 1.2", rotation angle = 86 degrees
  Source counts = 88.4 +/- 10.3
  Background counts = 17.6
  Rate = 0.003 +/- 0.0004

[Fri Oct 28 14:59:04 2011] Off-axis axis estimate = 6.58'
[Fri Oct 28 14:59:48 2011] Using EEF radius (= 1.94 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 14:59:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 14:59:48 2011] Initial guess for spatial extent in simple fitting = 1.94"
[Fri Oct 28 14:59:48 2011] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.030
[Fri Oct 28 14:59:48 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.94"
[Fri Oct 28 14:59:48 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 28 14:59:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10122_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 14:59:48 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 28 14:59:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10122_pi14-548_cl_pass0_src3.csv
[Fri Oct 28 14:59:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10122_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10122_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 14:59:48 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 28 14:59:48 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 28 14:59:48 2011] Fit fullrun_ccd7_acisf10122_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct 28 14:59:55 2011] Spatial fit model total counts = 100.919000, observed total counts = 101.000000
[Fri Oct 28 14:59:55 2011] Offset between fit and detection position for source 3 = 1.285895 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.285895 pixels
  Position = (350.3, 1024.5) = 13 59 14.05 47 5 24.3
  Extent = 2.3 (1.9-2.6)", rotation angle = 0
  Source counts = 100.6 +/- 10.0
  Background counts = 0.0
  Rate = 0.004 +/- 0.0004
[Fri Oct 28 14:59:55 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 14:59:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 14:59:55 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 14:59:55 2011] Source does appear to be extended
[Fri Oct 28 14:59:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 15:00:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 15:00:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 15:00:13 2011] Initial guess for spatial extent in simple fitting = 2.27"
[Fri Oct 28 15:00:13 2011] source mask rpix=4.6, npix_max = 104, mask sum = 110, frac = 1.050
[Fri Oct 28 15:00:13 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.27"
[Fri Oct 28 15:00:14 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 28 15:00:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10122_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 15:00:14 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 28 15:00:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10122_pi14-548_cl_pass1_src3.csv
[Fri Oct 28 15:00:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10122_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10122_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 15:00:14 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 28 15:00:14 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 28 15:00:14 2011] Fit fullrun_ccd7_acisf10122_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct 28 15:00:21 2011] Spatial fit model total counts = 109.992000, observed total counts = 110.000000
[Fri Oct 28 15:00:21 2011] Offset between fit and detection position for source 3 = 0.136123 pixels
[Fri Oct 28 15:00:21 2011] 110.000600 total counts/ 22.009300 bgd. counts: snr = 18.755844
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.136123 pixels
  Position = (350.2, 1024.4) = 13 59 14.05 47 5 24.3
  Extent = 2.1 (1.8-2.5)", rotation angle = 0
  Source counts = 88.0 +/- 10.5
  Background counts = 22.0
  Rate = 0.003 +/- 0.0004
[Fri Oct 28 15:00:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 15:00:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 15:00:21 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 15:00:21 2011] Source does appear to be extended
[Fri Oct 28 15:00:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 15:01:27 2011] Not overwriting source region fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 28 15:01:27 2011] Extracting stamp from image fullrun_ccd7_acisf10122_pi14-548_cl_sm2.00.img.gz, (256, 930) - (445, 1119)
[Fri Oct 28 15:01:27 2011] Writing fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3.gif
[Fri Oct 28 15:01:34 2011] ../../acisf10122/products/events/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3_src.evt and ../../acisf10122/products/events/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 28 15:01:34 2011] Size of ../../acisf10122/products/events/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3_src.evt.gz[events] = 113 counts
[Fri Oct 28 15:01:34 2011] Mean chipx,y = (992.88, 409.52)
[Fri Oct 28 15:01:34 2011] Mean tdetx,y = (4909.88, 2111.52)
[Fri Oct 28 15:01:34 2011] chipx,y range = (966.00-1018.00, 390.00-436.00)
[Fri Oct 28 15:01:34 2011] Size of ../../acisf10122/products/events/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 236 counts
[Fri Oct 28 15:01:34 2011] ../../acisf10122/products/images/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3_src.img and ../../acisf10122/products/images/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 28 15:01:34 2011] ../../acisf10122/products/spectra/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3_src.pi and ../../acisf10122/products/spectra/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 28 15:01:34 2011] Not generating rmf since there are only 87 counts
[Fri Oct 28 15:01:37 2011] ../../acisf10122/products/lightcurves/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3_src.lc and ../../acisf10122/products/lightcurves/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 28 15:02:35 2011] 206.693
[Fri Oct 28 15:02:38 2011] Updating aperture counts using extracted products
[Fri Oct 28 15:02:38 2011] Error reading totcts from fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 28 15:02:38 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 15:02:38 2011] Using photon index=1.80, rate=0.00324, arf fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src3.arf
[Fri Oct 28 15:02:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 15:02:38 2011] Updating source flux to 2.6e-14
[Fri Oct 28 15:02:47 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting