[Fri Oct 28 14:59:04 2011] Detection parameters:
  Position = (1331.6, 681.8) = 13 58 26.77 47 2 36.0
  Extent = 0.5" x 0.5", rotation angle = 150 degrees
  Source counts = 29.5 +/- 5.6
  Background counts = 1.5
  Rate = 0.001 +/- 0.0002

[Fri Oct 28 14:59:04 2011] Off-axis axis estimate = 3.79'
[Fri Oct 28 14:59:48 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 14:59:48 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Fri Oct 28 14:59:48 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.172
[Fri Oct 28 14:59:48 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.77"
[Fri Oct 28 14:59:48 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass0_src7.ximg exists
[Fri Oct 28 14:59:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10122_pi14-548_cl_pass0_src7.csv
[Fri Oct 28 14:59:48 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Oct 28 14:59:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10122_pi14-548_cl_pass0_src7.csv
[Fri Oct 28 14:59:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10122_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10122_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 14:59:48 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Oct 28 14:59:48 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Oct 28 14:59:48 2011] Fit fullrun_ccd7_acisf10122_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Oct 28 14:59:55 2011] Spatial fit model total counts = 54.383600, observed total counts = 54.000000
[Fri Oct 28 14:59:55 2011] Offset between fit and detection position for source 13 = 0.696648 pixels
[Fri Oct 28 14:59:55 2011] 54.263370 total counts/ 5.939570 bgd. counts: snr = 19.828213
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.696648 pixels
  Position = (1330.9, 681.7) = 13 58 26.82 47 2 35.8
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 48.3 +/- 7.4
  Background counts = 5.9
  Rate = 0.002 +/- 0.0003
[Fri Oct 28 14:59:55 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 14:59:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 14:59:55 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 14:59:55 2011] Source does appear to be extended
[Fri Oct 28 14:59:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 15:00:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 15:00:13 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Fri Oct 28 15:00:13 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.001
[Fri Oct 28 15:00:13 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.85"
[Fri Oct 28 15:00:14 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass1_src7.ximg exists
[Fri Oct 28 15:00:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10122_pi14-548_cl_pass1_src7.csv
[Fri Oct 28 15:00:14 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Oct 28 15:00:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10122_pi14-548_cl_pass1_src7.csv
[Fri Oct 28 15:00:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10122_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10122_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 15:00:14 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Oct 28 15:00:14 2011] fullrun_ccd7_acisf10122_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Oct 28 15:00:14 2011] Fit fullrun_ccd7_acisf10122_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Oct 28 15:00:21 2011] Spatial fit model total counts = 54.324200, observed total counts = 54.000000
[Fri Oct 28 15:00:21 2011] Offset between fit and detection position for source 13 = 0.064734 pixels
[Fri Oct 28 15:00:21 2011] 54.355360 total counts/ 5.605460 bgd. counts: snr = 20.590557
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.064734 pixels
  Position = (1330.9, 681.6) = 13 58 26.82 47 2 35.7
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 48.7 +/- 7.4
  Background counts = 5.6
  Rate = 0.002 +/- 0.0003
[Fri Oct 28 15:00:21 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 15:00:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 15:00:21 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 15:00:21 2011] Source does appear to be extended
[Fri Oct 28 15:00:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 15:01:27 2011] Not overwriting source region fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13_src.reg
[Fri Oct 28 15:01:27 2011] Extracting stamp from image fullrun_ccd7_acisf10122_pi14-548_cl_sm2.00.img.gz, (1292, 642) - (1370, 721)
[Fri Oct 28 15:01:27 2011] Writing fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13.gif
[Fri Oct 28 15:01:46 2011] ../../acisf10122/products/events/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13_src.evt and ../../acisf10122/products/events/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Fri Oct 28 15:01:46 2011] Size of ../../acisf10122/products/events/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13_src.evt.gz[events] = 52 counts
[Fri Oct 28 15:01:46 2011] Mean chipx,y = (101.71, 952.17)
[Fri Oct 28 15:01:46 2011] Mean tdetx,y = (4018.71, 2654.17)
[Fri Oct 28 15:01:46 2011] chipx,y range = (84.00-123.00, 935.00-973.00)
[Fri Oct 28 15:01:46 2011] Size of ../../acisf10122/products/events/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 49 counts
[Fri Oct 28 15:01:46 2011] ../../acisf10122/products/images/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13_src.img and ../../acisf10122/products/images/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Fri Oct 28 15:01:46 2011] ../../acisf10122/products/spectra/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13_src.pi and ../../acisf10122/products/spectra/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Fri Oct 28 15:01:46 2011] Not generating rmf since there are only 48 counts
[Fri Oct 28 15:01:49 2011] ../../acisf10122/products/lightcurves/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13_src.lc and ../../acisf10122/products/lightcurves/fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Fri Oct 28 15:02:35 2011] 215.065
[Fri Oct 28 15:02:38 2011] Updating aperture counts using extracted products
[Fri Oct 28 15:02:38 2011] Error reading totcts from fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13_src.pi.gz
[Fri Oct 28 15:02:38 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 15:02:38 2011] Using photon index=1.80, rate=0.00179, arf fullrun_ccd7_acisf10122_pi14-548_pass1_cl_src13.arf
[Fri Oct 28 15:02:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 15:02:38 2011] Updating source flux to 1.6e-14
[Fri Oct 28 15:02:47 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting