[Sat Oct 22 18:17:13 2011] Detection parameters:
  Position = (1160.2, 830.3) = 2 3 59.17 -17 1 6.1
  Extent = 0.6" x 0.5", rotation angle = 89 degrees
  Source counts = 11.6 +/- 3.5
  Background counts = 0.4
  Rate = 0.0006 +/- 0.0002

[Sat Oct 22 18:17:14 2011] Off-axis axis estimate = 2.81'
[Sat Oct 22 18:17:46 2011] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 18:17:46 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Sat Oct 22 18:17:46 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.873
[Sat Oct 22 18:17:46 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.54"
[Sat Oct 22 18:17:46 2011] fullrun_ccd6_acisf10116_pi14-548_cl_pass0_src6.ximg exists
[Sat Oct 22 18:17:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10116_pi14-548_cl_pass0_src6.csv
[Sat Oct 22 18:17:46 2011] fullrun_ccd6_acisf10116_pi14-548_cl_pass0_src6_1.ximg exists
[Sat Oct 22 18:17:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10116_pi14-548_cl_pass0_src6.csv
[Sat Oct 22 18:17:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10116_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10116_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 18:17:47 2011] fullrun_ccd6_acisf10116_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sat Oct 22 18:17:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10116_pi14-548_cl_pass0_tfrozen_src6.csv
[Sat Oct 22 18:17:47 2011] fullrun_ccd6_acisf10116_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Oct 22 18:17:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10116_pi14-548_cl_pass0_tfrozen_src6.csv
[Sat Oct 22 18:17:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10116_pi14-548_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10116_pi14-548_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 18:17:51 2011] Spatial fit model total counts = 12.421500, observed total counts = 15.000000
[Sat Oct 22 18:17:51 2011] Offset between fit and detection position for source 11 = 0.739294 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.739294 pixels
  Position = (1160.7, 830.9) = 2 3 59.17 -17 1 6.1
  Extent = 0.9 (0.6-1.4)" x 0.3 (0.2-0.5)", rotation angle = 90 (73-107) degrees
  Source counts = 11.6 +/- 3.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Sat Oct 22 18:17:51 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 18:17:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 18:17:51 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 18:17:51 2011] Source does appear to be extended
[Sat Oct 22 18:17:51 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.18
[Sat Oct 22 18:18:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 18:18:05 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Sat Oct 22 18:18:05 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.044
[Sat Oct 22 18:18:05 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.59"
[Sat Oct 22 18:18:07 2011] fullrun_ccd6_acisf10116_pi14-548_cl_pass1_src5.ximg exists
[Sat Oct 22 18:18:07 2011] fullrun_ccd6_acisf10116_pi14-548_cl_pass1_src5_1.ximg exists
[Sat Oct 22 18:18:07 2011] Fit fullrun_ccd6_acisf10116_pi14-548_cl_pass1_src5 appears to have run properly
[Sat Oct 22 18:18:07 2011] fullrun_ccd6_acisf10116_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Oct 22 18:18:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10116_pi14-548_cl_pass1_tfrozen_src5.csv
[Sat Oct 22 18:18:07 2011] fullrun_ccd6_acisf10116_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Oct 22 18:18:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10116_pi14-548_cl_pass1_tfrozen_src5.csv
[Sat Oct 22 18:18:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10116_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10116_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 18:18:11 2011] Spatial fit model total counts = 12.436900, observed total counts = 15.000000
[Sat Oct 22 18:18:11 2011] Offset between fit and detection position for source 11 = 0.098001 pixels
[Sat Oct 22 18:18:11 2011] 11.573377 total counts/ 0.125877 bgd. counts: snr = 32.265430
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.098001 pixels
  Position = (1160.8, 830.9) = 2 3 59.16 -17 1 6.1
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 11.4 +/- 3.4
  Background counts = 0.1
  Rate = 0.0006 +/- 0.0002
[Sat Oct 22 18:18:11 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 18:18:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 18:18:11 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 18:18:11 2011] Source does appear to be extended
[Sat Oct 22 18:18:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 18:22:44 2011] Not overwriting source region fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11_src.reg
[Sat Oct 22 18:22:44 2011] Extracting stamp from image fullrun_ccd6_acisf10116_pi14-548_cl_sm2.00.img.gz, (1133, 804) - (1188, 858)
[Sat Oct 22 18:22:44 2011] Writing fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11.gif
[Sat Oct 22 18:25:15 2011] ../../acisf10116/products/events/fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11_src.evt and ../../acisf10116/products/events/fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sat Oct 22 18:25:15 2011] Size of ../../acisf10116/products/events/fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11_src.evt.gz[events] = 12 counts
[Sat Oct 22 18:25:15 2011] Mean chipx,y = (941.75, 680.92)
[Sat Oct 22 18:25:15 2011] Mean tdetx,y = (3816.75, 2382.92)
[Sat Oct 22 18:25:15 2011] chipx,y range = (926.00-958.00, 665.00-694.00)
[Sat Oct 22 18:25:15 2011] Size of ../../acisf10116/products/events/fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 4 counts
[Sat Oct 22 18:25:15 2011] ../../acisf10116/products/images/fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11_src.img and ../../acisf10116/products/images/fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Sat Oct 22 18:25:15 2011] Not generating rmf since there are only 11 counts
[Sat Oct 22 18:25:15 2011] arf not found, will run specextract
[Sat Oct 22 18:25:51 2011] ../../acisf10116/products/spectra/fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11.warf not found
[Sat Oct 22 18:25:51 2011] ../../acisf10116/products/spectra/fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11.wrmf not found
[Sat Oct 22 18:25:51 2011] Removal of ../../acisf10116/products/spectra/fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11.soff failed
[Sat Oct 22 18:25:56 2011] ../../acisf10116/products/lightcurves/fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11_src.lc and ../../acisf10116/products/lightcurves/fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sat Oct 22 18:28:54 2011] Spectrum 11 has only 11 counts, deleting rmf
[Sat Oct 22 18:28:54 2011] 205.958
[Sat Oct 22 18:32:16 2011] Updating aperture counts using extracted products
[Sat Oct 22 18:32:16 2011] Error reading totcts from fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11_src.pi.gz
[Sat Oct 22 18:32:16 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 18:32:16 2011] Using photon index=1.80, rate=0.000575, arf fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11.arf
[Sat Oct 22 18:32:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 18:32:16 2011] Updating source flux to 6.2e-15
[Sat Oct 22 18:32:20 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 22 18:32:21 2011] acisf10116/analysis//spectral/fullrun_ccd6_acisf10116_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete