[Wed Sep 28 01:04:28 2011] Detection parameters:
  Position = (746.9, 830.5) = 17 48 47.43 -27 14 21.3
  Extent = 0.8" x 0.5", rotation angle = 176 degrees
  Source counts = 10.6 +/- 3.5
  Background counts = 1.4
  Rate = 0.0002 +/- 7e-05

[Wed Sep 28 01:04:33 2011] Off-axis axis estimate = 4.05'
[Wed Sep 28 01:05:52 2011] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 01:05:52 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Wed Sep 28 01:05:52 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.015
[Wed Sep 28 01:05:52 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.85"
[Wed Sep 28 01:05:53 2011] fullrun_ccd6_acisf10112_pi14-548_cl_pass0_src8.ximg exists
[Wed Sep 28 01:05:53 2011] fullrun_ccd6_acisf10112_pi14-548_cl_pass0_src8_1.ximg exists
[Wed Sep 28 01:05:53 2011] Fit fullrun_ccd6_acisf10112_pi14-548_cl_pass0_src8 appears to have run properly
[Wed Sep 28 01:05:53 2011] fullrun_ccd6_acisf10112_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Wed Sep 28 01:05:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10112_pi14-548_cl_pass0_tfrozen_src8.csv
[Wed Sep 28 01:05:53 2011] fullrun_ccd6_acisf10112_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Sep 28 01:05:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10112_pi14-548_cl_pass0_tfrozen_src8.csv
[Wed Sep 28 01:05:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10112_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10112_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 01:06:03 2011] Spatial fit model total counts = 16.872700, observed total counts = 19.000000
[Wed Sep 28 01:06:03 2011] Offset between fit and detection position for source 3 = 0.630487 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.630487 pixels
  Position = (747.5, 830.2) = 17 48 47.43 -27 14 21.7
  Extent = 1.0 (0.6-1.4)", rotation angle = 0
  Source counts = 16.0 +/- 4.0
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Wed Sep 28 01:06:03 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 01:06:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 01:06:03 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 01:06:03 2011] Source does appear to be extended
[Wed Sep 28 01:06:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 01:06:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 01:06:26 2011] Initial guess for spatial extent in simple fitting = 1.03"
[Wed Sep 28 01:06:26 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.935
[Wed Sep 28 01:06:26 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 1.03"
[Wed Sep 28 01:06:27 2011] fullrun_ccd6_acisf10112_pi14-548_cl_pass1_src8.ximg exists
[Wed Sep 28 01:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10112_pi14-548_cl_pass1_src8.csv
[Wed Sep 28 01:06:27 2011] fullrun_ccd6_acisf10112_pi14-548_cl_pass1_src8_1.ximg exists
[Wed Sep 28 01:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10112_pi14-548_cl_pass1_src8.csv
[Wed Sep 28 01:06:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10112_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10112_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 01:06:27 2011] fullrun_ccd6_acisf10112_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Wed Sep 28 01:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10112_pi14-548_cl_pass1_tfrozen_src8.csv
[Wed Sep 28 01:06:27 2011] fullrun_ccd6_acisf10112_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Sep 28 01:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10112_pi14-548_cl_pass1_tfrozen_src8.csv
[Wed Sep 28 01:06:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10112_pi14-548_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10112_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 01:06:36 2011] Spatial fit model total counts = 16.381000, observed total counts = 19.000000
[Wed Sep 28 01:06:36 2011] Offset between fit and detection position for source 3 = 0.033804 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.033804 pixels
  Position = (747.5, 830.2) = 17 48 47.43 -27 14 21.7
  Extent = 1.0 (0.6-1.3)", rotation angle = 0
  Source counts = 15.4 +/- 3.9
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Wed Sep 28 01:06:36 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 01:06:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 01:06:36 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 01:06:36 2011] Source does appear to be extended
[Wed Sep 28 01:06:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 01:07:19 2011] Not overwriting source region fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3_src.reg
[Wed Sep 28 01:07:19 2011] Extracting stamp from image fullrun_ccd6_acisf10112_pi14-548_cl_sm2.00.img.gz, (700, 783) - (795, 877)
[Wed Sep 28 01:07:19 2011] Writing fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3.gif
[Wed Sep 28 01:07:41 2011] ../../acisf10112/products/events/fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3_src.evt and ../../acisf10112/products/events/fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Sep 28 01:07:41 2011] Size of ../../acisf10112/products/events/fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3_src.evt.gz[events] = 17 counts
[Wed Sep 28 01:07:41 2011] Mean chipx,y = (745.47, 586.53)
[Wed Sep 28 01:07:41 2011] Mean tdetx,y = (3620.47, 2288.53)
[Wed Sep 28 01:07:41 2011] chipx,y range = (723.00-756.00, 571.00-604.00)
[Wed Sep 28 01:07:41 2011] Size of ../../acisf10112/products/events/fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 67 counts
[Wed Sep 28 01:07:41 2011] ../../acisf10112/products/images/fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3_src.img and ../../acisf10112/products/images/fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Sep 28 01:07:41 2011] ../../acisf10112/products/spectra/fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3_src.pi and ../../acisf10112/products/spectra/fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Sep 28 01:07:41 2011] Not generating rmf since there are only 15 counts
[Wed Sep 28 01:07:44 2011] ../../acisf10112/products/lightcurves/fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3_src.lc and ../../acisf10112/products/lightcurves/fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Sep 28 01:08:21 2011] 192.675
[Wed Sep 28 01:10:07 2011] Updating aperture counts using extracted products
[Wed Sep 28 01:10:07 2011] Error reading totcts from fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Sep 28 01:10:07 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 01:10:07 2011] Using photon index=1.80, rate=0.000304, arf fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3.arf
[Wed Sep 28 01:10:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 01:10:07 2011] Updating source flux to 4.7e-15
[Wed Sep 28 01:10:25 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 01:10:26 2011] acisf10112/analysis//spectral/fullrun_ccd6_acisf10112_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete