[Mon Oct  3 21:41:01 2011] Detection parameters:
  Position = (452.2, 262.6) = 17 48 48.35 -27 9 53.6
  Extent = 0.5" x 0.5", rotation angle = 78 degrees
  Source counts = 53.7 +/- 9.0
  Background counts = 27.3
  Rate = 0.0008 +/- 0.0001

[Mon Oct  3 21:41:07 2011] Off-axis axis estimate = 0.70'
[Mon Oct  3 21:42:24 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 21:42:24 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct  3 21:42:24 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.913
[Mon Oct  3 21:42:24 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.38"
[Mon Oct  3 21:42:26 2011] fullrun_ccd7_acisf10111_pi14-548_cl_pass0_src17.ximg exists
[Mon Oct  3 21:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10111_pi14-548_cl_pass0_src17.csv
[Mon Oct  3 21:42:26 2011] fullrun_ccd7_acisf10111_pi14-548_cl_pass0_src17_1.ximg exists
[Mon Oct  3 21:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10111_pi14-548_cl_pass0_src17.csv
[Mon Oct  3 21:42:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10111_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10111_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 21:42:29 2011] fullrun_ccd7_acisf10111_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Mon Oct  3 21:42:29 2011] fullrun_ccd7_acisf10111_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Oct  3 21:42:29 2011] Fit fullrun_ccd7_acisf10111_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Oct  3 21:42:50 2011] Spatial fit model total counts = 180.995000, observed total counts = 181.000000
[Mon Oct  3 21:42:50 2011] Offset between fit and detection position for source 4 = 0.830545 pixels
[Mon Oct  3 21:42:50 2011] 176.151200 total counts/ 144.774000 bgd. counts: snr = 2.607768
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.830545 pixels
  Position = (452.7, 263.2) = 17 48 48.35 -27 9 53.6
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 31.4 +/- 13.3
  Background counts = 144.8
  Rate = 0.0005 +/- 0.0002
[Mon Oct  3 21:42:50 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 21:42:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 21:42:50 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 21:42:50 2011] Source does appear to be extended
[Mon Oct  3 21:42:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 21:43:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 21:43:11 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Mon Oct  3 21:43:11 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.858
[Mon Oct  3 21:43:11 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.55"
[Mon Oct  3 21:43:15 2011] fullrun_ccd7_acisf10111_pi14-548_cl_pass1_src17.ximg exists
[Mon Oct  3 21:43:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10111_pi14-548_cl_pass1_src17.csv
[Mon Oct  3 21:43:15 2011] fullrun_ccd7_acisf10111_pi14-548_cl_pass1_src17_1.ximg exists
[Mon Oct  3 21:43:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10111_pi14-548_cl_pass1_src17.csv
[Mon Oct  3 21:43:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10111_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10111_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 21:43:17 2011] fullrun_ccd7_acisf10111_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Mon Oct  3 21:43:17 2011] fullrun_ccd7_acisf10111_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Oct  3 21:43:17 2011] Fit fullrun_ccd7_acisf10111_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Oct  3 21:43:36 2011] Spatial fit model total counts = 159.995000, observed total counts = 160.000000
[Mon Oct  3 21:43:36 2011] Offset between fit and detection position for source 4 = 0.049964 pixels
[Mon Oct  3 21:43:36 2011] 156.100400 total counts/ 122.760000 bgd. counts: snr = 3.009140
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.049964 pixels
  Position = (452.7, 263.1) = 17 48 48.35 -27 9 53.6
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 33.3 +/- 12.5
  Background counts = 122.8
  Rate = 0.0005 +/- 0.0002
[Mon Oct  3 21:43:36 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 21:43:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 21:43:36 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 21:43:36 2011] Source does appear to be extended
[Mon Oct  3 21:43:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 21:45:50 2011] Not overwriting source region fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4_src.reg
[Mon Oct  3 21:45:50 2011] Extracting stamp from image fullrun_ccd7_acisf10111_pi14-548_cl_sm2.00.img.gz, (427, 237) - (479, 289)
[Mon Oct  3 21:45:50 2011] Writing fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4.gif
[Mon Oct  3 21:46:57 2011] ../../acisf10111/products/events/fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4_src.evt and ../../acisf10111/products/events/fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Mon Oct  3 21:46:57 2011] Size of ../../acisf10111/products/events/fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4_src.evt.gz[events] = 66 counts
[Mon Oct  3 21:46:57 2011] Mean chipx,y = (246.71, 437.14)
[Mon Oct  3 21:46:57 2011] Mean tdetx,y = (4163.71, 2139.14)
[Mon Oct  3 21:46:57 2011] chipx,y range = (227.00-268.00, 419.00-456.00)
[Mon Oct  3 21:46:57 2011] Size of ../../acisf10111/products/events/fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 378 counts
[Mon Oct  3 21:46:57 2011] ../../acisf10111/products/images/fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4_src.img and ../../acisf10111/products/images/fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Mon Oct  3 21:46:57 2011] ../../acisf10111/products/spectra/fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4_src.pi and ../../acisf10111/products/spectra/fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Mon Oct  3 21:46:57 2011] Not generating rmf since there are only 33 counts
[Mon Oct  3 21:47:02 2011] ../../acisf10111/products/lightcurves/fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4_src.lc and ../../acisf10111/products/lightcurves/fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Mon Oct  3 21:48:44 2011] 222.459
[Mon Oct  3 21:48:51 2011] Updating aperture counts using extracted products
[Mon Oct  3 21:48:51 2011] Error reading totcts from fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4_src.pi.gz
[Mon Oct  3 21:48:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 21:48:52 2011] Using photon index=1.80, rate=0.000488, arf fullrun_ccd7_acisf10111_pi14-548_pass1_cl_src4.arf
[Mon Oct  3 21:48:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 21:48:52 2011] Updating source flux to 6.3e-15
[Mon Oct  3 21:49:22 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting