[Mon Oct  3 21:41:05 2011] Detection parameters:
  Position = (413.5, 211.7) = 17 48 49.78 -27 10 18.7
  Extent = 0.6" x 0.5", rotation angle = 143 degrees
  Source counts = 28.5 +/- 7.1
  Background counts = 21.5
  Rate = 0.0004 +/- 0.0001

[Mon Oct  3 21:41:07 2011] Off-axis axis estimate = 0.83'
[Mon Oct  3 21:42:24 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 21:42:24 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct  3 21:42:24 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.383
[Mon Oct  3 21:42:24 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 0.38"
[Mon Oct  3 21:42:26 2011] fullrun_ccd7_acisf10111_pi14-548_cl_pass0_src30.ximg exists
[Mon Oct  3 21:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10111_pi14-548_cl_pass0_src30.csv
[Mon Oct  3 21:42:26 2011] fullrun_ccd7_acisf10111_pi14-548_cl_pass0_src30_1.ximg exists
[Mon Oct  3 21:42:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10111_pi14-548_cl_pass0_src30.csv
[Mon Oct  3 21:42:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10111_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10111_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 21:42:30 2011] fullrun_ccd7_acisf10111_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Mon Oct  3 21:42:30 2011] fullrun_ccd7_acisf10111_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Oct  3 21:42:30 2011] Fit fullrun_ccd7_acisf10111_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Mon Oct  3 21:42:50 2011] Spatial fit model total counts = 93.526500, observed total counts = 94.000000
[Mon Oct  3 21:42:50 2011] Offset between fit and detection position for source 30 = 1.180948 pixels
[Mon Oct  3 21:42:50 2011] 99.703100 total counts/ 88.763500 bgd. counts: snr = 1.161139
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.180948 pixels
  Position = (412.9, 212.7) = 17 48 49.82 -27 10 18.4
  Extent = 0.4 (0.2-1.5)", rotation angle = 0
  Source counts = 10.9 +/- 10.0
  Background counts = 88.8
  Rate = 0.0002 +/- 0.0001
  Deleting source due to low Poisson probability