[Mon Oct  3 21:40:57 2011] Detection parameters:
  Position = (481.8, 709.8) = 17 47 57.23 -27 4 39.6
  Extent = 1.2" x 1.0", rotation angle = 15 degrees
  Source counts = 62.6 +/- 12.4
  Background counts = 90.4
  Rate = 0.0009 +/- 0.0002

[Mon Oct  3 21:40:57 2011] Off-axis axis estimate = 12.28'
[Mon Oct  3 21:42:22 2011] Using EEF radius (= 6.74 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 21:42:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 21:42:22 2011] Initial guess for spatial extent in simple fitting = 6.74"
[Mon Oct  3 21:42:22 2011] source mask rpix=13.7, npix_max = 806, mask sum = 756, frac = 0.938
[Mon Oct  3 21:42:22 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 6.74"
[Mon Oct  3 21:42:22 2011] fullrun_ccd3_acisf10111_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct  3 21:42:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10111_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 21:42:22 2011] fullrun_ccd3_acisf10111_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct  3 21:42:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10111_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 21:42:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10111_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10111_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 21:42:23 2011] fullrun_ccd3_acisf10111_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct  3 21:42:23 2011] fullrun_ccd3_acisf10111_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct  3 21:42:23 2011] Fit fullrun_ccd3_acisf10111_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct  3 21:42:37 2011] Spatial fit model total counts = 521.228000, observed total counts = 516.000000
[Mon Oct  3 21:42:37 2011] Offset between fit and detection position for source 5 = 0.583287 pixels
[Mon Oct  3 21:42:37 2011] 520.973200 total counts/ 439.396000 bgd. counts: snr = 3.891712
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.583287 pixels
  Position = (481.4, 710.3) = 17 47 57.26 -27 4 39.6
  Extent = 5.1 (3.0-6.6)", rotation angle = 0
  Source counts = 81.6 +/- 22.8
  Background counts = 439.4
  Rate = 0.001 +/- 0.0003
[Mon Oct  3 21:42:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 21:42:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 21:42:37 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 21:42:37 2011] Source does appear to be extended
[Mon Oct  3 21:42:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 21:43:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 21:43:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 21:43:09 2011] Initial guess for spatial extent in simple fitting = 5.09"
[Mon Oct  3 21:43:09 2011] source mask rpix=10.3, npix_max = 470, mask sum = 440, frac = 0.935
[Mon Oct  3 21:43:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.09"
[Mon Oct  3 21:43:09 2011] fullrun_ccd3_acisf10111_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct  3 21:43:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10111_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 21:43:09 2011] fullrun_ccd3_acisf10111_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct  3 21:43:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10111_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 21:43:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10111_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10111_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 21:43:09 2011] fullrun_ccd3_acisf10111_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct  3 21:43:09 2011] fullrun_ccd3_acisf10111_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct  3 21:43:09 2011] Fit fullrun_ccd3_acisf10111_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct  3 21:43:25 2011] Spatial fit model total counts = 316.357000, observed total counts = 313.000000
[Mon Oct  3 21:43:25 2011] Offset between fit and detection position for source 5 = 0.391347 pixels
[Mon Oct  3 21:43:25 2011] 316.135000 total counts/ 213.391000 bgd. counts: snr = 7.033450
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.391347 pixels
  Position = (481.0, 710.3) = 17 47 57.28 -27 4 39.6
  Extent = 6.0 (3.9-7.9)", rotation angle = 0
  Source counts = 102.7 +/- 17.8
  Background counts = 213.4
  Rate = 0.002 +/- 0.0003
[Mon Oct  3 21:43:25 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 21:43:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 21:43:25 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 21:43:25 2011] Source does appear to be extended
[Mon Oct  3 21:43:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 21:44:22 2011] Not overwriting source region fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_src.reg
[Mon Oct  3 21:44:22 2011] Extracting stamp from image fullrun_ccd3_acisf10111_pi14-548_cl_sm2.00.img.gz, (207, 436) - (755, 985)
[Mon Oct  3 21:44:22 2011] Writing fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5.gif
[Mon Oct  3 21:44:22 2011] ../../acisf10111/products/events/fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_src.evt and ../../acisf10111/products/events/fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Mon Oct  3 21:44:22 2011] Size of ../../acisf10111/products/events/fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_src.evt.gz[events] = 336 counts
[Mon Oct  3 21:44:22 2011] Mean chipx,y = (466.27, 330.77)
[Mon Oct  3 21:44:22 2011] Mean tdetx,y = (4801.23, 3527.27)
[Mon Oct  3 21:44:22 2011] chipx,y range = (407.00-529.00, 272.00-394.00)
[Mon Oct  3 21:44:23 2011] Size of ../../acisf10111/products/events/fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 2283 counts
[Mon Oct  3 21:44:23 2011] ../../acisf10111/products/images/fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_src.img and ../../acisf10111/products/images/fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Mon Oct  3 21:44:23 2011] ../../acisf10111/products/spectra/fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_src.pi and ../../acisf10111/products/spectra/fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Mon Oct  3 21:44:26 2011] ../../acisf10111/products/lightcurves/fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_src.lc and ../../acisf10111/products/lightcurves/fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Mon Oct  3 21:44:39 2011] Keeping rmf generated by specextract
[Mon Oct  3 21:44:39 2011] 146.459
[Mon Oct  3 21:48:51 2011] Updating aperture counts using extracted products
[Mon Oct  3 21:48:51 2011] Error reading totcts from fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_src.pi.gz
[Mon Oct  3 21:48:51 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 21:48:51 2011] Using photon index=1.80, rate=0.00151, arf fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5.arf
[Mon Oct  3 21:48:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 21:48:51 2011] Updating source flux to 2.8e-14
[Mon Oct  3 21:49:09 2011] Reading fit data from acisf10111/analysis//spectral/fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_pl.csv
[Mon Oct  3 21:49:09 2011] Spectral fit parameter nH value = 1.23729e+21
[Mon Oct  3 21:49:09 2011] Spectral fit parameter PhoIndex value = 3.36497
[Mon Oct  3 21:49:09 2011] Failed to get F(0.3-8.0) from acisf10111/analysis//spectral/fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Mon Oct  3 21:49:09 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 21:49:09 2011] Using Nh = 1.2e+21, photon index=3.36, rate=0.00151, arf fullrun_ccd3_acisf10111_pi14-548_pass1_cl_src5.arf
[Mon Oct  3 21:49:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 21:49:09 2011] Updating source flux to 2e-14