[Thu Sep 29 13:51:37 2011] Detection parameters:
  Position = (1041.4, 272.8) = 18 29 6.15 -12 53 0.9
  Extent = 0.5" x 0.5", rotation angle = 155 degrees
  Source counts = 10.6 +/- 3.5
  Background counts = 1.4
  Rate = 0.0002 +/- 8e-05

[Thu Sep 29 13:51:38 2011] Off-axis axis estimate = 0.97'
[Thu Sep 29 13:53:02 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:53:02 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Sep 29 13:53:02 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Thu Sep 29 13:53:02 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.38"
[Thu Sep 29 13:53:03 2011] fullrun_ccd3_acisf10098_pi14-548_cl_pass0_src21.ximg exists
[Thu Sep 29 13:53:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10098_pi14-548_cl_pass0_src21.csv
[Thu Sep 29 13:53:03 2011] fullrun_ccd3_acisf10098_pi14-548_cl_pass0_src21_1.ximg exists
[Thu Sep 29 13:53:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10098_pi14-548_cl_pass0_src21.csv
[Thu Sep 29 13:53:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10098_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10098_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 13:53:04 2011] fullrun_ccd3_acisf10098_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Thu Sep 29 13:53:04 2011] fullrun_ccd3_acisf10098_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Sep 29 13:53:04 2011] Fit fullrun_ccd3_acisf10098_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Sep 29 13:53:16 2011] Spatial fit model total counts = 17.614000, observed total counts = 18.000000
[Thu Sep 29 13:53:16 2011] Offset between fit and detection position for source 15 = 0.731028 pixels
[Thu Sep 29 13:53:16 2011] 17.187730 total counts/ 6.787930 bgd. counts: snr = 3.991685
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.731028 pixels
  Position = (1041.8, 273.5) = 18 29 6.15 -12 53 0.9
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 10.4 +/- 4.1
  Background counts = 6.8
  Rate = 0.0002 +/- 9e-05
[Thu Sep 29 13:53:16 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 13:53:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 13:53:16 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 13:53:16 2011] Source does appear to be extended
[Thu Sep 29 13:53:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 13:53:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:53:37 2011] Initial guess for spatial extent in simple fitting = 0.30"
[Thu Sep 29 13:53:37 2011] source mask rpix=0.6, npix_max = 5, mask sum = 6, frac = 1.197
[Thu Sep 29 13:53:37 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.30"
[Thu Sep 29 13:53:38 2011] fullrun_ccd3_acisf10098_pi14-548_cl_pass1_src17.ximg exists
[Thu Sep 29 13:53:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10098_pi14-548_cl_pass1_src17.csv
[Thu Sep 29 13:53:38 2011] fullrun_ccd3_acisf10098_pi14-548_cl_pass1_src17_1.ximg exists
[Thu Sep 29 13:53:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10098_pi14-548_cl_pass1_src17.csv
[Thu Sep 29 13:53:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10098_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10098_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 13:53:38 2011] fullrun_ccd3_acisf10098_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Thu Sep 29 13:53:38 2011] fullrun_ccd3_acisf10098_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Sep 29 13:53:38 2011] Fit fullrun_ccd3_acisf10098_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Sep 29 13:53:49 2011] Spatial fit model total counts = 17.673000, observed total counts = 18.000000
[Thu Sep 29 13:53:49 2011] Offset between fit and detection position for source 15 = 0.009517 pixels
[Thu Sep 29 13:53:49 2011] 17.245830 total counts/ 6.933130 bgd. counts: snr = 3.916586
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.009517 pixels
  Position = (1041.8, 273.5) = 18 29 6.15 -12 53 0.9
  Extent = 0.3 (0.1-0.5)", rotation angle = 0
  Source counts = 10.3 +/- 4.2
  Background counts = 6.9
  Rate = 0.0002 +/- 9e-05
[Thu Sep 29 13:53:49 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 13:53:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 13:53:49 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 13:53:49 2011] Source does appear to be extended
[Thu Sep 29 13:53:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 13:57:32 2011] Not overwriting source region fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15_src.reg
[Thu Sep 29 13:57:32 2011] Extracting stamp from image fullrun_ccd3_acisf10098_pi14-548_cl_sm2.00.img.gz, (1028, 260) - (1055, 287)
[Thu Sep 29 13:57:32 2011] Writing fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15.gif
[Thu Sep 29 13:58:36 2011] ../../acisf10098/products/events/fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15_src.evt and ../../acisf10098/products/events/fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Thu Sep 29 13:58:36 2011] Size of ../../acisf10098/products/events/fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15_src.evt.gz[events] = 11 counts
[Thu Sep 29 13:58:36 2011] Mean chipx,y = (867.64, 936.82)
[Thu Sep 29 13:58:36 2011] Mean tdetx,y = (4195.18, 3928.64)
[Thu Sep 29 13:58:36 2011] chipx,y range = (857.00-888.00, 920.00-953.00)
[Thu Sep 29 13:58:36 2011] Size of ../../acisf10098/products/events/fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 5 counts
[Thu Sep 29 13:58:36 2011] ../../acisf10098/products/images/fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15_src.img and ../../acisf10098/products/images/fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Thu Sep 29 13:58:36 2011] ../../acisf10098/products/spectra/fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15_src.pi and ../../acisf10098/products/spectra/fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Thu Sep 29 13:58:36 2011] Not generating rmf since there are only 10 counts
[Thu Sep 29 13:58:42 2011] ../../acisf10098/products/lightcurves/fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15_src.lc and ../../acisf10098/products/lightcurves/fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Thu Sep 29 13:59:09 2011] 200.977
[Thu Sep 29 13:59:21 2011] Updating aperture counts using extracted products
[Thu Sep 29 13:59:21 2011] Error reading totcts from fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15_src.pi.gz
[Thu Sep 29 13:59:21 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 13:59:21 2011] Using photon index=1.80, rate=0.000232, arf fullrun_ccd3_acisf10098_pi14-548_pass1_cl_src15.arf
[Thu Sep 29 13:59:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 13:59:21 2011] Updating source flux to 3.5e-15
[Thu Sep 29 13:59:39 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting