[Thu Sep 29 13:51:35 2011] Detection parameters:
  Position = (536.9, 1001.0) = 18 29 16.23 -12 55 20.5
  Extent = 0.6" x 0.5", rotation angle = 118 degrees
  Source counts = 10.1 +/- 3.6
  Background counts = 2.9
  Rate = 0.0002 +/- 8e-05

[Thu Sep 29 13:51:35 2011] Off-axis axis estimate = 3.71'
[Thu Sep 29 13:53:01 2011] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:53:01 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Thu Sep 29 13:53:01 2011] source mask rpix=1.5, npix_max = 16, mask sum = 12, frac = 0.736
[Thu Sep 29 13:53:01 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.75"
[Thu Sep 29 13:53:02 2011] fullrun_ccd2_acisf10098_pi14-548_cl_pass0_src13.ximg exists
[Thu Sep 29 13:53:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10098_pi14-548_cl_pass0_src13.csv
[Thu Sep 29 13:53:02 2011] fullrun_ccd2_acisf10098_pi14-548_cl_pass0_src13_1.ximg exists
[Thu Sep 29 13:53:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10098_pi14-548_cl_pass0_src13.csv
[Thu Sep 29 13:53:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10098_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10098_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 13:53:02 2011] fullrun_ccd2_acisf10098_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Thu Sep 29 13:53:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10098_pi14-548_cl_pass0_tfrozen_src13.csv
[Thu Sep 29 13:53:02 2011] fullrun_ccd2_acisf10098_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Sep 29 13:53:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10098_pi14-548_cl_pass0_tfrozen_src13.csv
[Thu Sep 29 13:53:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10098_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10098_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 13:53:14 2011] Spatial fit model total counts = 20.988400, observed total counts = 23.000000
[Thu Sep 29 13:53:14 2011] Offset between fit and detection position for source 11 = 0.703681 pixels
[Thu Sep 29 13:53:14 2011] 22.776740 total counts/ 16.300700 bgd. counts: snr = 1.604008
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.703681 pixels
  Position = (537.5, 1000.6) = 18 29 16.22 -12 55 21.0
  Extent = 0.2 (0.2-0.3)", rotation angle = 0
  Source counts = 6.5 +/- 4.8
  Background counts = 16.3
  Rate = 0.0001 +/- 0.0001
  Deleting source due to low Poisson probability