[Thu Sep 29 13:51:28 2011] Detection parameters:
  Position = (94.6, 808.9) = 18 28 56.72 -12 55 12.8
  Extent = 0.5" x 0.5", rotation angle = 147 degrees
  Source counts = 124.7 +/- 11.3
  Background counts = 3.3
  Rate = 0.003 +/- 0.0003

[Thu Sep 29 13:51:31 2011] Off-axis axis estimate = 2.23'
[Thu Sep 29 13:52:59 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:52:59 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Thu Sep 29 13:52:59 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.107
[Thu Sep 29 13:52:59 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.46"
[Thu Sep 29 13:52:59 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass0_src3.ximg exists
[Thu Sep 29 13:52:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10098_pi14-548_cl_pass0_src3.csv
[Thu Sep 29 13:52:59 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass0_src3_1.ximg exists
[Thu Sep 29 13:52:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10098_pi14-548_cl_pass0_src3.csv
[Thu Sep 29 13:52:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10098_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10098_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 13:53:00 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu Sep 29 13:53:00 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Sep 29 13:53:00 2011] Fit fullrun_ccd0_acisf10098_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Sep 29 13:53:10 2011] Spatial fit model total counts = 129.214000, observed total counts = 129.000000
[Thu Sep 29 13:53:10 2011] Offset between fit and detection position for source 4 = 0.697247 pixels
[Thu Sep 29 13:53:10 2011] 128.571070 total counts/ 2.598070 bgd. counts: snr = 78.154151
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.697247 pixels
  Position = (95.1, 809.4) = 18 28 56.72 -12 55 12.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 126.0 +/- 11.3
  Background counts = 2.6
  Rate = 0.003 +/- 0.0003
[Thu Sep 29 13:53:10 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 13:53:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 13:53:10 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 13:53:10 2011] Source does appear to be extended
[Thu Sep 29 13:53:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 13:53:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:53:33 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Thu Sep 29 13:53:33 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.004
[Thu Sep 29 13:53:33 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.60"
[Thu Sep 29 13:53:34 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass1_src3.ximg exists
[Thu Sep 29 13:53:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10098_pi14-548_cl_pass1_src3.csv
[Thu Sep 29 13:53:34 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass1_src3_1.ximg exists
[Thu Sep 29 13:53:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10098_pi14-548_cl_pass1_src3.csv
[Thu Sep 29 13:53:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10098_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10098_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 13:53:34 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu Sep 29 13:53:34 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Sep 29 13:53:34 2011] Fit fullrun_ccd0_acisf10098_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Sep 29 13:53:43 2011] Spatial fit model total counts = 124.600000, observed total counts = 129.000000
[Thu Sep 29 13:53:43 2011] Offset between fit and detection position for source 4 = 0.005695 pixels
[Thu Sep 29 13:53:43 2011] 123.672730 total counts/ 1.694730 bgd. counts: snr = 93.698200
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.005695 pixels
  Position = (95.1, 809.4) = 18 28 56.72 -12 55 12.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 122.0 +/- 11.1
  Background counts = 1.7
  Rate = 0.003 +/- 0.0003
[Thu Sep 29 13:53:43 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 13:53:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 13:53:43 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 13:53:43 2011] Source does appear to be extended
[Thu Sep 29 13:53:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 13:54:10 2011] Not overwriting source region fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_src.reg
[Thu Sep 29 13:54:10 2011] Extracting stamp from image fullrun_ccd0_acisf10098_pi14-548_cl_sm2.00.img.gz, (68, 782) - (123, 837)
[Thu Sep 29 13:54:10 2011] Writing fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4.gif
[Thu Sep 29 13:54:17 2011] ../../acisf10098/products/events/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_src.evt and ../../acisf10098/products/events/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Thu Sep 29 13:54:17 2011] Size of ../../acisf10098/products/events/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_src.evt.gz[events] = 127 counts
[Thu Sep 29 13:54:17 2011] Mean chipx,y = (982.55, 812.82)
[Thu Sep 29 13:54:17 2011] Mean tdetx,y = (3873.82, 4149.45)
[Thu Sep 29 13:54:17 2011] chipx,y range = (966.00-999.00, 793.00-832.00)
[Thu Sep 29 13:54:17 2011] Size of ../../acisf10098/products/events/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 23 counts
[Thu Sep 29 13:54:17 2011] ../../acisf10098/products/images/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_src.img and ../../acisf10098/products/images/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Thu Sep 29 13:54:17 2011] ../../acisf10098/products/spectra/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_src.pi and ../../acisf10098/products/spectra/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Thu Sep 29 13:54:21 2011] ../../acisf10098/products/lightcurves/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_src.lc and ../../acisf10098/products/lightcurves/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Thu Sep 29 13:55:05 2011] Keeping rmf generated by specextract
[Thu Sep 29 13:55:05 2011] 201.14
[Thu Sep 29 13:59:19 2011] Updating aperture counts using extracted products
[Thu Sep 29 13:59:19 2011] Error reading totcts from fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_src.pi.gz
[Thu Sep 29 13:59:20 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 13:59:20 2011] Using photon index=1.80, rate=0.00274, arf fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4.arf
[Thu Sep 29 13:59:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 13:59:20 2011] Updating source flux to 4.2e-14
[Thu Sep 29 13:59:34 2011] Reading fit data from acisf10098/analysis//spectral/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_pl.csv
[Thu Sep 29 13:59:34 2011] Spectral fit parameter nH value = 4.15157e+16
[Thu Sep 29 13:59:34 2011] Spectral fit parameter PhoIndex value = -0.0468986
[Thu Sep 29 13:59:34 2011] Failed to get F(0.3-8.0) from acisf10098/analysis//spectral/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Thu Sep 29 13:59:34 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 13:59:34 2011] Using Nh = 4.2e+16, photon index=-0.05, rate=0.00274, arf fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src4.arf
[Thu Sep 29 13:59:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 13:59:34 2011] Updating source flux to 6.8e-14