[Thu Sep 29 13:51:30 2011] Detection parameters:
  Position = (795.5, 417.9) = 18 28 33.12 -12 58 25.0
  Extent = 4.6" x 3.0", rotation angle = 20 degrees
  Source counts = 91.8 +/- 11.7
  Background counts = 45.2
  Rate = 0.002 +/- 0.0003

[Thu Sep 29 13:51:31 2011] Off-axis axis estimate = 8.72'
[Thu Sep 29 13:52:59 2011] Using EEF radius (= 3.36 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:52:59 2011] Initial guess for spatial extent in simple fitting = 3.36"
[Thu Sep 29 13:52:59 2011] source mask rpix=6.8, npix_max = 214, mask sum = 210, frac = 0.977
[Thu Sep 29 13:52:59 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 3.36"
[Thu Sep 29 13:52:59 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass0_src15.ximg exists
[Thu Sep 29 13:53:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10098_pi14-548_cl_pass0_src15.csv
[Thu Sep 29 13:53:00 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass0_src15_1.ximg exists
[Thu Sep 29 13:53:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10098_pi14-548_cl_pass0_src15.csv
[Thu Sep 29 13:53:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10098_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10098_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 13:53:00 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Thu Sep 29 13:53:00 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Sep 29 13:53:00 2011] Fit fullrun_ccd0_acisf10098_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Thu Sep 29 13:53:10 2011] Spatial fit model total counts = 148.000000, observed total counts = 148.000000
[Thu Sep 29 13:53:10 2011] Offset between fit and detection position for source 29 = 2.869290 pixels
[Thu Sep 29 13:53:10 2011] 148.260200 total counts/ 53.427500 bgd. counts: snr = 12.974054
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 2.869290 pixels
  Position = (798.1, 419.1) = 18 28 33.05 -12 58 24.7
  Extent = 3.9 (3.0-4.7)", rotation angle = 0
  Source counts = 94.8 +/- 12.2
  Background counts = 53.4
  Rate = 0.002 +/- 0.0003
[Thu Sep 29 13:53:10 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 13:53:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 13:53:10 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 13:53:10 2011] Source does appear to be extended
[Thu Sep 29 13:53:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 13:53:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:53:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 13:53:33 2011] Initial guess for spatial extent in simple fitting = 3.88"
[Thu Sep 29 13:53:33 2011] source mask rpix=7.9, npix_max = 281, mask sum = 272, frac = 0.965
[Thu Sep 29 13:53:33 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 3.88"
[Thu Sep 29 13:53:34 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass1_src13.ximg exists
[Thu Sep 29 13:53:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10098_pi14-548_cl_pass1_src13.csv
[Thu Sep 29 13:53:34 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass1_src13_1.ximg exists
[Thu Sep 29 13:53:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10098_pi14-548_cl_pass1_src13.csv
[Thu Sep 29 13:53:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10098_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10098_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 13:53:35 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Thu Sep 29 13:53:35 2011] fullrun_ccd0_acisf10098_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Sep 29 13:53:35 2011] Fit fullrun_ccd0_acisf10098_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Sep 29 13:53:43 2011] Spatial fit model total counts = 170.000000, observed total counts = 170.000000
[Thu Sep 29 13:53:43 2011] Offset between fit and detection position for source 29 = 0.125660 pixels
[Thu Sep 29 13:53:43 2011] 170.358600 total counts/ 79.608900 bgd. counts: snr = 10.171017
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.125660 pixels
  Position = (798.3, 419.0) = 18 28 33.05 -12 58 24.7
  Extent = 3.8 (3.0-4.5)", rotation angle = 0
  Source counts = 90.7 +/- 13.1
  Background counts = 79.6
  Rate = 0.002 +/- 0.0003
[Thu Sep 29 13:53:43 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 13:53:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 13:53:43 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 13:53:43 2011] Source does appear to be extended
[Thu Sep 29 13:53:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 13:54:11 2011] Not overwriting source region fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29_src.reg
[Thu Sep 29 13:54:11 2011] Extracting stamp from image fullrun_ccd0_acisf10098_pi14-548_cl_sm2.00.img.gz, (627, 247) - (970, 591)
[Thu Sep 29 13:54:11 2011] Writing fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29.gif
[Thu Sep 29 13:54:50 2011] ../../acisf10098/products/events/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29_src.evt and ../../acisf10098/products/events/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Thu Sep 29 13:54:50 2011] Size of ../../acisf10098/products/events/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29_src.evt.gz[events] = 148 counts
[Thu Sep 29 13:54:50 2011] Mean chipx,y = (375.28, 282.91)
[Thu Sep 29 13:54:50 2011] Mean tdetx,y = (3343.91, 4756.72)
[Thu Sep 29 13:54:50 2011] chipx,y range = (332.00-415.00, 239.00-324.00)
[Thu Sep 29 13:54:50 2011] Size of ../../acisf10098/products/events/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 678 counts
[Thu Sep 29 13:54:50 2011] ../../acisf10098/products/images/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29_src.img and ../../acisf10098/products/images/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Thu Sep 29 13:54:50 2011] ../../acisf10098/products/spectra/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29_src.pi and ../../acisf10098/products/spectra/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Thu Sep 29 13:54:50 2011] Not generating rmf since there are only 90 counts
[Thu Sep 29 13:54:52 2011] ../../acisf10098/products/lightcurves/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29_src.lc and ../../acisf10098/products/lightcurves/fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Thu Sep 29 13:55:05 2011] 168.261
[Thu Sep 29 13:59:20 2011] Updating aperture counts using extracted products
[Thu Sep 29 13:59:20 2011] Error reading totcts from fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29_src.pi.gz
[Thu Sep 29 13:59:20 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 13:59:20 2011] Using photon index=1.80, rate=0.00204, arf fullrun_ccd0_acisf10098_pi14-548_pass1_cl_src29.arf
[Thu Sep 29 13:59:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 13:59:20 2011] Updating source flux to 3.6e-14
[Thu Sep 29 13:59:24 2011] Source 29 has fewer than 100.000000 counts, skipping spectral fitting