[Wed Oct 26 08:13:37 2011] Detection parameters:
  Position = (516.4, 715.3) = 0 24 47.00 64 9 57.8
  Extent = 0.7" x 0.7", rotation angle = 111 degrees
  Source counts = 813.5 +/- 47.0
  Background counts = 1394.5
  Rate = 0.008 +/- 0.0004

[Wed Oct 26 08:15:10 2011] Off-axis axis estimate = 4.10'
[Wed Oct 26 08:31:19 2011] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:31:19 2011] Initial guess for spatial extent in simple fitting = 0.86"
[Wed Oct 26 08:31:19 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.234
[Wed Oct 26 08:31:19 2011] Giving source the simple spatial ID 97 for pass 0, mean size = 0.86"
[Wed Oct 26 08:31:22 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src97.ximg exists
[Wed Oct 26 08:31:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src97.csv
[Wed Oct 26 08:31:22 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src97_1.ximg exists
[Wed Oct 26 08:31:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src97.csv
[Wed Oct 26 08:31:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:31:24 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_tfrozen_src97.ximg exists
[Wed Oct 26 08:31:24 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_tfrozen_src97_1.ximg exists
[Wed Oct 26 08:31:24 2011] Fit fullrun_ccd3_acisf10097_pi14-548_cl_pass0_tfrozen_src97 appears to have run properly
[Wed Oct 26 08:32:49 2011] Spatial fit model total counts = 4167.000000, observed total counts = 4167.000000
[Wed Oct 26 08:32:49 2011] Offset between fit and detection position for source 86 = 1.319539 pixels
[Wed Oct 26 08:32:49 2011] 3983.414000 total counts/ 3444.380000 bgd. counts: snr = 9.184608
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 1.319539 pixels
  Position = (517.4, 714.5) = 0 24 46.96 64 9 57.1
  Extent = 1.3 (1.1-1.7)", rotation angle = 0
  Source counts = 539.0 +/- 63.1
  Background counts = 3444.4
  Rate = 0.005 +/- 0.0006
[Wed Oct 26 08:32:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:32:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:32:49 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:32:49 2011] Source does appear to be extended
[Wed Oct 26 08:32:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:34:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:34:43 2011] Initial guess for spatial extent in simple fitting = 1.35"
[Wed Oct 26 08:34:43 2011] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.171
[Wed Oct 26 08:34:43 2011] Giving source the simple spatial ID 95 for pass 1, mean size = 1.35"
[Wed Oct 26 08:34:47 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src95.ximg exists
[Wed Oct 26 08:34:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src95.csv
[Wed Oct 26 08:34:47 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src95_1.ximg exists
[Wed Oct 26 08:34:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src95.csv
[Wed Oct 26 08:34:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src95_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:34:49 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_tfrozen_src95.ximg exists
[Wed Oct 26 08:34:49 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_tfrozen_src95_1.ximg exists
[Wed Oct 26 08:34:49 2011] Fit fullrun_ccd3_acisf10097_pi14-548_cl_pass1_tfrozen_src95 appears to have run properly
[Wed Oct 26 08:36:08 2011] Source 86 is offset by -1.002376 and 5.424931 pixels which is larger than
2 X fitted extent = 1.704329 x 1.704329, not incorporating fit results
[Wed Oct 26 08:36:08 2011] Warning, spatial fit 95 centroid is now closest to src. 323
[Wed Oct 26 08:36:08 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:36:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:36:08 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:36:08 2011] Source does appear to be extended
[Wed Oct 26 08:36:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 09:09:29 2011] Not overwriting source region fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86_src.reg
[Wed Oct 26 09:09:29 2011] Extracting stamp from image fullrun_ccd3_acisf10097_pi14-548_cl_sm2.00.img.gz, (456, 653) - (579, 776)
[Wed Oct 26 09:09:29 2011] Writing fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86.gif
[Wed Oct 26 09:14:56 2011] ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86_src.evt and ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86_bgd.evt exist, delete to re-create
[Wed Oct 26 09:14:56 2011] Size of ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86_src.evt.gz[events] = 5259 counts
[Wed Oct 26 09:14:56 2011] Mean chipx,y = (580.31, 687.10)
[Wed Oct 26 09:14:56 2011] Mean tdetx,y = (4444.90, 3641.31)
[Wed Oct 26 09:14:56 2011] chipx,y range = (552.00-609.00, 659.00-714.00)
[Wed Oct 26 09:14:57 2011] Size of ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86_bgd.evt.gz[events] = 21057 counts
[Wed Oct 26 09:14:57 2011] ../../acisf10097/products/images/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86_src.img and ../../acisf10097/products/images/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86_bgd.img exist, delete to re-create
[Wed Oct 26 09:14:57 2011] ../../acisf10097/products/spectra/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86_src.pi and ../../acisf10097/products/spectra/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86_bgd.pi exist, delete to re-create
[Wed Oct 26 09:15:00 2011] ../../acisf10097/products/lightcurves/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86_src.lc and ../../acisf10097/products/lightcurves/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86_bgd.lc exist, delete to re-create
[Wed Oct 26 11:23:48 2011] Keeping rmf generated by specextract
[Wed Oct 26 11:23:48 2011] 188.68
[Wed Oct 26 11:25:35 2011] Updating aperture counts using extracted products
[Wed Oct 26 11:25:35 2011] Error reading totcts from fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86_src.pi.gz
[Wed Oct 26 11:25:55 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 11:25:55 2011] Using photon index=1.80, rate=0.00502, arf fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src86.arf
[Wed Oct 26 11:25:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 11:25:55 2011] Updating source flux to 7.3e-14
[Wed Oct 26 11:57:06 2011] Flag b found in src. 86 procflags, skipping spectral fitting