[Wed Oct 26 08:13:36 2011] Detection parameters:
  Position = (423.3, 532.6) = 0 24 54.03 64 8 28.0
  Extent = 0.9" x 0.9", rotation angle = 10 degrees
  Source counts = 897.5 +/- 54.5
  Background counts = 2076.5
  Rate = 0.008 +/- 0.0005

[Wed Oct 26 08:15:10 2011] Off-axis axis estimate = 3.07'
[Wed Oct 26 08:31:19 2011] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:31:19 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Wed Oct 26 08:31:19 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.772
[Wed Oct 26 08:31:19 2011] Giving source the simple spatial ID 81 for pass 0, mean size = 0.59"
[Wed Oct 26 08:31:22 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src81.ximg exists
[Wed Oct 26 08:31:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src81.csv
[Wed Oct 26 08:31:22 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src81_1.ximg exists
[Wed Oct 26 08:31:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src81.csv
[Wed Oct 26 08:31:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:31:23 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_tfrozen_src81.ximg exists
[Wed Oct 26 08:31:24 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_tfrozen_src81_1.ximg exists
[Wed Oct 26 08:31:24 2011] Fit fullrun_ccd3_acisf10097_pi14-548_cl_pass0_tfrozen_src81 appears to have run properly
[Wed Oct 26 08:32:49 2011] Spatial fit model total counts = 4022.040000, observed total counts = 4022.000000
[Wed Oct 26 08:32:49 2011] Offset between fit and detection position for source 77 = 1.914888 pixels
[Wed Oct 26 08:32:49 2011] 4056.174000 total counts/ 3539.000000 bgd. counts: snr = 8.693535
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 1.914888 pixels
  Position = (421.7, 533.6) = 0 24 54.19 64 8 28.2
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 517.2 +/- 63.7
  Background counts = 3539.0
  Rate = 0.005 +/- 0.0006
[Wed Oct 26 08:32:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:32:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:32:49 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:32:49 2011] Source does appear to be extended
[Wed Oct 26 08:32:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:34:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:34:43 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Wed Oct 26 08:34:43 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Wed Oct 26 08:34:43 2011] Giving source the simple spatial ID 79 for pass 1, mean size = 1.50"
[Wed Oct 26 08:34:47 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src79.ximg exists
[Wed Oct 26 08:34:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src79.csv
[Wed Oct 26 08:34:47 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src79_1.ximg exists
[Wed Oct 26 08:34:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src79.csv
[Wed Oct 26 08:34:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:34:49 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_tfrozen_src79.ximg exists
[Wed Oct 26 08:34:49 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_tfrozen_src79_1.ximg exists
[Wed Oct 26 08:34:49 2011] Fit fullrun_ccd3_acisf10097_pi14-548_cl_pass1_tfrozen_src79 appears to have run properly
[Wed Oct 26 08:36:08 2011] Spatial fit model total counts = 5106.880000, observed total counts = 5107.000000
[Wed Oct 26 08:36:08 2011] Offset between fit and detection position for source 77 = 1.181559 pixels
[Wed Oct 26 08:36:08 2011] 5115.200000 total counts/ 3800.180000 bgd. counts: snr = 21.331936
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 1.181559 pixels
  Position = (422.6, 534.2) = 0 24 54.12 64 8 28.5
  Extent = 3.0 (2.9-3.0)", rotation angle = 0
  Source counts = 1315.0 +/- 71.5
  Background counts = 3800.2
  Rate = 0.01 +/- 0.0007
[Wed Oct 26 08:36:08 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:36:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:36:08 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:36:08 2011] Source does appear to be extended
[Wed Oct 26 08:36:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 09:09:27 2011] Not overwriting source region fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77_src.reg
[Wed Oct 26 09:09:27 2011] Extracting stamp from image fullrun_ccd3_acisf10097_pi14-548_cl_sm2.00.img.gz, (287, 398) - (559, 670)
[Wed Oct 26 09:09:28 2011] Writing fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77.gif
[Wed Oct 26 09:14:04 2011] ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77_src.evt and ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77_bgd.evt exist, delete to re-create
[Wed Oct 26 09:14:05 2011] Size of ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77_src.evt.gz[events] = 23419 counts
[Wed Oct 26 09:14:05 2011] Mean chipx,y = (782.76, 689.87)
[Wed Oct 26 09:14:05 2011] Mean tdetx,y = (4442.13, 3843.76)
[Wed Oct 26 09:14:05 2011] chipx,y range = (742.00-826.00, 648.00-731.00)
[Wed Oct 26 09:14:05 2011] Size of ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77_bgd.evt.gz[events] = 131008 counts
[Wed Oct 26 09:14:05 2011] ../../acisf10097/products/images/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77_src.img and ../../acisf10097/products/images/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77_bgd.img exist, delete to re-create
[Wed Oct 26 09:14:05 2011] ../../acisf10097/products/spectra/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77_src.pi and ../../acisf10097/products/spectra/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77_bgd.pi exist, delete to re-create
[Wed Oct 26 09:14:08 2011] ../../acisf10097/products/lightcurves/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77_src.lc and ../../acisf10097/products/lightcurves/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77_bgd.lc exist, delete to re-create
[Wed Oct 26 11:23:47 2011] Keeping rmf generated by specextract
[Wed Oct 26 11:23:47 2011] 188.568
[Wed Oct 26 11:25:34 2011] Updating aperture counts using extracted products
[Wed Oct 26 11:25:34 2011] Error reading totcts from fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77_src.pi.gz
[Wed Oct 26 11:25:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 11:25:54 2011] Using photon index=1.80, rate=0.0122, arf fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src77.arf
[Wed Oct 26 11:25:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 11:25:55 2011] Updating source flux to 1.8e-13