[Wed Oct 26 08:13:42 2011] Detection parameters:
  Position = (253.3, 462.3) = 0 25 6.82 64 7 53.5
  Extent = 0.9" x 0.9", rotation angle = 62 degrees
  Source counts = 794.0 +/- 48.0
  Background counts = 1514.0
  Rate = 0.007 +/- 0.0004

[Wed Oct 26 08:15:10 2011] Off-axis axis estimate = 1.78'
[Wed Oct 26 08:31:19 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:31:19 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Wed Oct 26 08:31:19 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.263
[Wed Oct 26 08:31:19 2011] Giving source the simple spatial ID 100 for pass 0, mean size = 0.41"
[Wed Oct 26 08:31:22 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src100.ximg exists
[Wed Oct 26 08:31:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src100.csv
[Wed Oct 26 08:31:22 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src100_1.ximg exists
[Wed Oct 26 08:31:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src100.csv
[Wed Oct 26 08:31:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10097_pi14-548_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:31:24 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_tfrozen_src100.ximg exists
[Wed Oct 26 08:31:24 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass0_tfrozen_src100_1.ximg exists
[Wed Oct 26 08:31:24 2011] Fit fullrun_ccd3_acisf10097_pi14-548_cl_pass0_tfrozen_src100 appears to have run properly
[Wed Oct 26 08:32:49 2011] Spatial fit model total counts = 2985.020000, observed total counts = 2982.000000
[Wed Oct 26 08:32:49 2011] Offset between fit and detection position for source 126 = 1.696574 pixels
[Wed Oct 26 08:32:49 2011] 2967.189000 total counts/ 2608.940000 bgd. counts: snr = 7.013793
Spatial fit parameters:
  Offset between fit and detection position for source 126 = 1.696574 pixels
  Position = (251.6, 462.3) = 0 25 6.99 64 7 53.3
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 358.2 +/- 54.5
  Background counts = 2608.9
  Rate = 0.003 +/- 0.0005
[Wed Oct 26 08:32:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:32:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:32:49 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:32:49 2011] Source does appear to be extended
[Wed Oct 26 08:32:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 08:32:50 2011] Source is confused with source 214
[Wed Oct 26 08:34:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 08:34:43 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Wed Oct 26 08:34:43 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Wed Oct 26 08:34:43 2011] Giving source the simple spatial ID 98 for pass 1, mean size = 1.50"
[Wed Oct 26 08:34:47 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src98.ximg exists
[Wed Oct 26 08:34:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src98.csv
[Wed Oct 26 08:34:47 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src98_1.ximg exists
[Wed Oct 26 08:34:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src98.csv
[Wed Oct 26 08:34:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src98_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10097_pi14-548_cl_pass1_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 08:34:49 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_tfrozen_src98.ximg exists
[Wed Oct 26 08:34:49 2011] fullrun_ccd3_acisf10097_pi14-548_cl_pass1_tfrozen_src98_1.ximg exists
[Wed Oct 26 08:34:49 2011] Fit fullrun_ccd3_acisf10097_pi14-548_cl_pass1_tfrozen_src98 appears to have run properly
[Wed Oct 26 08:36:08 2011] Spatial fit model total counts = 6290.890000, observed total counts = 6291.000000
[Wed Oct 26 08:36:08 2011] Offset between fit and detection position for source 126 = 0.667097 pixels
[Wed Oct 26 08:36:08 2011] 6196.943000 total counts/ 5802.550000 bgd. counts: snr = 5.177496
Spatial fit parameters:
  Offset between fit and detection position for source 126 = 0.667097 pixels
  Position = (252.2, 462.4) = 0 25 6.94 64 7 53.3
  Extent = 1.6 (1.3-2.2)", rotation angle = 0
  Source counts = 394.4 +/- 78.7
  Background counts = 5802.6
  Rate = 0.004 +/- 0.0007
[Wed Oct 26 08:36:08 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 08:36:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 08:36:08 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 08:36:08 2011] Source does appear to be extended
[Wed Oct 26 08:36:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 09:09:29 2011] Not overwriting source region fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126_src.reg
[Wed Oct 26 09:09:29 2011] Extracting stamp from image fullrun_ccd3_acisf10097_pi14-548_cl_sm2.00.img.gz, (178, 388) - (327, 537)
[Wed Oct 26 09:09:29 2011] Writing fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126.gif
[Wed Oct 26 09:15:06 2011] ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126_src.evt and ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126_bgd.evt exist, delete to re-create
[Wed Oct 26 09:15:06 2011] Size of ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126_src.evt.gz[events] = 5995 counts
[Wed Oct 26 09:15:06 2011] Mean chipx,y = (924.59, 812.41)
[Wed Oct 26 09:15:06 2011] Mean tdetx,y = (4319.59, 3985.59)
[Wed Oct 26 09:15:06 2011] chipx,y range = (894.00-955.00, 781.00-843.00)
[Wed Oct 26 09:15:06 2011] Size of ../../acisf10097/products/events/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126_bgd.evt.gz[events] = 31156 counts
[Wed Oct 26 09:15:06 2011] ../../acisf10097/products/images/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126_src.img and ../../acisf10097/products/images/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126_bgd.img exist, delete to re-create
[Wed Oct 26 09:15:06 2011] ../../acisf10097/products/spectra/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126_src.pi and ../../acisf10097/products/spectra/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126_bgd.pi exist, delete to re-create
[Wed Oct 26 09:15:09 2011] ../../acisf10097/products/lightcurves/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126_src.lc and ../../acisf10097/products/lightcurves/fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126_bgd.lc exist, delete to re-create
[Wed Oct 26 11:23:48 2011] Keeping rmf generated by specextract
[Wed Oct 26 11:23:49 2011] 201.914
[Wed Oct 26 11:25:35 2011] Updating aperture counts using extracted products
[Wed Oct 26 11:25:35 2011] Error reading totcts from fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126_src.pi.gz
[Wed Oct 26 11:25:56 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 11:25:56 2011] Using photon index=1.80, rate=0.00367, arf fullrun_ccd3_acisf10097_pi14-548_pass1_cl_src126.arf
[Wed Oct 26 11:25:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 11:25:56 2011] Updating source flux to 5.1e-14
[Wed Oct 26 11:57:06 2011] Flag c found in src. 126 procflags, skipping spectral fitting